Abstract:This study delves into experimental research on a retrofitted organic Rankine cycle (ORC), focusing on the performance of the expansion process near saturated vapor states (from two-phase to superheated conditions). A multi-vane expander was selected for its relevance in small-scale partially evaporated ORC. Several sensors were installed to monitor key parameters, including pressure, temperature, vapor quality, and rotational speed of the expander. The results show that the isentropic efficiency spans a range of 0.37 to 0.49. This variability was observed within an inlet vapor quality of 0.93–0.98, pressure ratios ranging from 5.67 to 10.67, and density ratios ranging from 7.4 to 13.3. In response to the challenge of time-consuming experiments and identification, this research employed deep learning techniques to predict the isentropic efficiency. Two different prediction scenarios were explored: one based on pressure ratio and the other based on density ratio. The results show that predictions based on density ratio offer better accuracy for isentropic efficiency compared to those based on pressure ratio. Three different scenarios for prediction were explored: initially utilizing two input parameters (density ratio and vapor quality), which show root mean squared error (RMSE) and coefficient of determination ( R 2 ) values in the ranges of 0.0136–0.0148 and 0.5832–0.6474, respectively. Subsequent enhancements were achieved by introducing inlet temperature as a third input parameter, improving performance with RMSE of 0.0033–0.0034 and R 2 of 0.9780–0.9793. Moreover, incorporating rotational speed as a fourth input parameter, the prediction was performed with nearly similar RMSE and R 2 values compared to using only three input parameters; it significantly reduces computing times in some cases, achieving speeds relatively 2.25–49.70% faster. This approach demonstrated a well-fitted line and an accurate performance map, establishing its effectiveness in predicting isentropic efficiency.

Performance and parameter prediction of SCR–ORC system based on data–model fusion and twin data–driven

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

Fast Economic Nonlinear Model Predictive Control Strategy of Organic Rankine Cycle for Waste Heat Recovery: Simulation-based Studies

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

Optimization of Organic Rankine Cycle Involving Operating Conditions and Work Fluids and Heat Integration

Towards Predictive Maintenance of a Heavy-Duty Gas Turbine A New Hybrid Intelligent Methodology for Performance Simulation

Performance prediction of a cryogenic organic Rankine cycle based on back propagation neural network optimized by genetic algorithm

Research on Load Prediction of Low-Calorific Fuel Fired Gas Turbine Based on Data and Knowledge Hybrid Model

Performance prediction and optimization of an organic Rankine cycle (ORC) for waste heat recovery using back propagation neural network

Data-Driven Model Identification and Efficient MPC Via Quasi-Linear Parameter Varying Representation for ORC Waste Heat Recovery System

Introducing machine learning and hybrid algorithm for prediction and optimization of multistage centrifugal pump in an ORC system

Operation characteristics and performance prediction of a 3 kW organic Rankine cycle (ORC) with automatic control system based on machine learning methodology

Enhancing Working Fluid Selection for Novel Cogeneration Systems by Integrating Predictive Modeling: from Molecular Simulation to Process Evaluation

Artificial intelligence-driven performance mapping: A deep learning-based investigation of a multi-vane expander in retrofitted organic Rankine cycle

Part-Load Performance Prediction And Operation Strategy Design Of Organic Rankine Cycles With A Medium Cycle Used For Recovering Waste Heat From Gaseous Fuel Engines

Fast robust optimization of ORC based on an artificial neural network for waste heat recovery

Prediction and optimization of power output of single screw expander in organic Rankine cycle (ORC) for diesel engine waste heat recovery

A novel optimization method for transcritical-subcritical parallel organic Rankine cycle under variable engine loads and cooling water temperature

Control Of Organic Rankine Cycle For Waste Heat Recovery Based On An Optimized Predictive Model

Aerodynamic Prediction on the Off-Design Performance of a S-CO2 Turbine Based on Deep Learning

Simulation and Prediction of Thermodynamic Performance of Reciprocating Compressor Utilizing Physical Models Combining with Generalized Regression Neural Network