Abstract:Poly(amide-ether)/NiFe 2 O 4 nanocomposites with different amounts of NiFe 2 O 4 were synthesized by the solution intercalation method. Poly(amide-ether) (12) derived from dibenzo xanthene was prepared by condensation reaction of N -(3-(14H-dibenzo[a,j]xanthen-14-yl)phenyl)-3,5-diaminobenzamide ( 7 ) and 4,4′-(ethane-1,2-diylbis(oxy))dibenzoic acid (10) monomers. The poly amide-ether (PAE) was characterized by Fourier-transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance ( 1 H-NMR), ultraviolet–visible spectroscopy (UV–vis), and thermogravimetric analysis (TGA). The intrinsic viscosity of PAE in DMF solution, with a concentration of 0.01 g/dL at a temperature of 25 °C, was found to be 0.31 dL/g −1 . NiFe 2 O 4 nanoparticles were prepared via the co-precipitation method and used for the preparation of new poly(amide-ether)/NiFe 2 O 4 nanocomposites (PAEN 3% and PAEN 5%). The morphology, crystalline phase, thermal stability, and magnetization properties of the prepared nanocomposites were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), UV–vis, TGA, DSC, and vibrating sample magnetometer (VSM). The SEM measurements show that the diameter of the NiFe 2 O 4 nanoparticles is about 40 nm. The XRD results indicated the formation of NiFe 2 O 4 nanoparticles with cubic phase in the PAE matrix. In examining the optical properties, it has been observed that by increasing the NiFe 2 O 4 nanoparticle concentration, PAEN 3% and PAEN 5% nanocomposites show a decrease in wavelength and have a blue shift of 2 and 4 nm, respectively, compared to pure PAE. The magnetic properties of the sample were showed that the sample exhibited typical ferromagnetic behavior at room temperature. Also, results of TGA measurement have shown that the incorporation of NiFe 2 O 4 in a higher concentration in the PAE matrix revealed improved thermal stability when compared to the neat PAE. The results indicate that the prepared nanocomposites exhibited magnetic properties and improvement in the thermal stability compared to neat PAE.

A new strategy to prepare magnetoceramics by bulk pyrolysis of Fe-containing polyamide precursors

Ferrocene-Decorated Hyperbranched Poly(aroxycarbonylphenylene)s: Synthesis, Light Refraction, Photopatterning and Precursor to Magnetic Ceramics

Ferrocene-based Poly(aroxycarbonyltriazole)s: Synthesis by Metal-Free Click Polymerization and Use As Precursors to Magnetic Ceramics

Preparation of 0.5pbtio_3/0.5nife_2o_4 Ceramic Composites by Sol-gel Method

Fe 3 O 4 /fepc/pc Magnetic Composites with High Mechanical Properties and Thermal Stabilities by in Situ Preparation

Superparamagnetic Silicon Carbonitride Ceramic Fibers Through In Situ Generation of Iron Silicide Nanoparticles During Pyrolysis of an Iron-Modified Polysilazane

Synthesis and characterization of novel magnetic Fe3O4/polyphosphazene nanofibers

4D printing of shape-programmable polymer-derived ceramics via two-stage folding-assisted pyrolysis strategy

POSS containing hyperbranched polymers as precursors for magnetic Co@C-SiO x ceramic nanocomposites with good sinter–resistant properties and high ceramic yield

Dielectric, Ferroelectric and Magnetoelectric Properties of In-Situ Synthesized CoFe2O4/BaTiO3 Composite Ceramics

Ferrocene-Modified Polyacrylonitrile-Containing Block Copolymers as Preceramic Materials

One-pot Preparation of Polyimide/fe 3 O 4 Magnetic Nanofibers with Solvent Resistant Properties

Synthesis and characterization of novel magnetic heat-resistant poly(amide-ether) nanocomposites based on dibenzo xanthene

Thermomechanical properties of confined magnetic nanoparticles in electrospun polyacrylonitrile nanofiber matrix exposed to a magnetic environment: Structure, Morphology, and Stabilization (Cyclization)

Preparation of Polybenzoxazine-Functionalized Fe3O4 Nanoparticles Through in Situ Diels–Alder Polymerization for High Performance Magnetic Polybenzoxazine/fe3o4 Nanocomposites

Preparation of the PBOPy/PPy/Fe3O4 Composites with High Microwave Absorption Performance and Thermal Stability

Recent advances on polymer precursors derived silicon-based ceramics:Fabrication, functionalization and high temperature application

Enhancing organosilicon polymer-derived ceramic properties

Preparation of Fe3O4/PVP magnetic nanofibers via in situ method with electrospinning

Nanocomposites of Polyethylene with Fe3O4 Nanoparticles Via Surface-Initiated ROMP: Thermomechanical, Shape Memory and Photothermal Properties

Characterization on the formation mechanism of Fe-0/Fe3C/C nanostructure and its effect on PMS activation performance towards BPA degradation