Single-layer CoFe hydroxides for efficient electrocatalytic oxygen evolution

Yi Zhou,Jialai Hu,Dan Li,Qingsheng Gao

DOI: https://doi.org/10.1039/d1cc03253d

IF: 4.9

2021-01-01

Chemical Communications

Abstract:Single-layer CoFe layered double hydroxides are successfully fabricated under near-anhydrous conditions, and accomplish superior OER activity compared to most of the non-precious electrocatalysts.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Self-Supported Low-Crystallinity Cofe Layered Double Hydroxide Nanospheres on Monolayer Ti3c2 Electrode for Oxygen Evolution Reaction

Shuo Wang,Lu Wang,Yi Liu,Qingqing Li,Ying-Hua Zhou,Wei Chen

DOI: https://doi.org/10.1016/j.jallcom.2024.174614

IF: 6.2

2024-01-01

Journal of Alloys and Compounds

Abstract:The electrocatalytic oxygen evolution reaction is a crucial means to support the conversion and storage of the sustainable renewable energy. Low-crystallinity can offer short-range structural ordering and high active site density. In this work, an efficient self-supported oxygen evolution reaction (OER) electrocatalyst, cobalt iron layered double hydroxide (LDH) grown on Ti3C2 modified nickel foam (NF) heterostructure anode (CoFe-LDH/Ti3C2/NF) was prepared using electrodeposition. The exceptional electrocatalytic OER performance is ensured by in situ decorating monolayer Ti3C2/NF (s-Ti3C2/NF) with low-crystallinity CoFe nanospheres. By harnessing the low crystallinity, well-chosen composition and reasonable heterostructure, the overpotential of CoFe-LDH/Ti3C2/NF decreases to 246mV at a current density of 10mA·cm-2 in alkaline media. After 3000 cyclic voltammograms cycles, the ignorable increase in overpotential of 14mV suggest the excellent long circular stability. Moreover, an accelerated reaction kinetics is implied by the smaller Tafel slope (28.76mV·dec-1) and higher double-layer specific capacitance (2.33 mF·cm-2), which surpassed the counterparts CoFe-LDH grown on NF (CoFe-LDH/NF) and s-Ti3C2/NF. This work paves a new way to fabricate the low-crystallinity materials for electrocatalysis and energy storage.
Defective Layered NiFe Double Hydroxides Anchored on Self-Supported CoNi-nitrogen Doped Carbon Nanotube Composite As Advanced Electrocatalyst for Oxygen Evolution Reaction

Bo Zheng,Kai Gong,Yue Zhou,Wenshu Chen,Zhaorui Pan,Guangxiang Liu,Leiming Lang

DOI: https://doi.org/10.1016/j.ijhydene.2022.08.147

IF: 7.2

2022-01-01

International Journal of Hydrogen Energy

Abstract:Oxygen evolution reaction (OER) is an essential process during electrochemical water -splitting. Due to its sluggish kinetics, low cost and highly efficient catalyst is invariably desired to decrease its overpotential for large-scale application. However, the overpotential of most advanced OER electrocatalysts is still more than 200 mV at the current density of 10 mA cm-2. In this work, we constructed active layered NiFe double hydroxides with cation defects on self-supported three-dimensional (3D) CoNi nitrogen-doped carbon nanotube composite substrate as integrated OER catalyst. Strikingly, electrochemical measurements showed that the optimized sample exhibited outstanding OER activity with low overpotentials of 178 and 268 mV at the current densities of 10 and 100 mA cm-2 in alkaline environment, alongside a good durability. The excellent OER performance was ascribed to the strongly synergistic effect of intrinsically active NiFe double hydroxide layers with abundant cation vacancies and 3D carbon nanotube composite substrate with good conductivity and various functional moieties, thus facilitating the electrocatalytic kinetic.(c) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
Design yolk-shelled FeCo layered double hydroxide via a "one-stone-two-birds" strategy for oxygen evolution reaction

Dongyu Han,Lin Hao,Rou Wang,Yongjun Gao,Ming Su,Yufan Zhang

DOI: https://doi.org/10.1016/j.seppur.2024.126363

IF: 8.6

2024-01-13

Separation and Purification Technology

Abstract:In order to meet the demands for green and sustainable energy, it is imperative to develop high-performance, cost-effective, and environmentally friendly electrocatalysts to enhance the oxygen evolution reaction (OER). In this regard, we introduce a novel reconstruction strategy, involving crystallization, growth, and etching processes, to synthesize a highly efficient electrocatalyst for the OER. A hydrothermal process was initially employed to synthesize materials of institute Lavoisier framework-88 (MIL-88) as a self-engaged precursor, which was subsequently transformed into hierarchical FeCo layered double hydroxide (LDH)@zeolitic imidazolate framework-67 (ZIF-67). Additionally, a "one-stone-two-birds" strategy was employed to create the yolk-shelled FeCo-LDH composite (denoted as YS FeCo-LDH) by etching FeCo-LDH@ZIF-67. On one hand, ZIF-67 can be gradually etched by the H + ions generated through the hydrolysis of [Fe(C 2 O 4 ) 3 ] 3− . On the other hand, simultaneously released Fe 3+ and Co 2+ co-precipitate with OH – /C 2 O 4 2− , resulting in the formation of the FeCo-LDH shells. Benefiting from the yolk-shell structure, excellent microstructural integrity, efficient mass transport within interlinked nanocages, and abundant active sites, the YS FeCo-LDH catalyst exhibits remarkable electrocatalytic performance in the OER. This work represents a significant advancement in the development of high-efficiency yolk-shelled hollow electrocatalysts.

engineering, chemical
Heterogeneous ultra-thin FeCo-LDH@Co(OH)2 nanosheets facilitated electrons transfer for oxygen evolution reaction

Xian Yang,Jun Cheng,Yang Xu,Hao Li,Weifeng Tu,Junhu Zhou

DOI: https://doi.org/10.1016/j.cej.2023.145076

IF: 15.1

2023-07-01

Chemical Engineering Journal

Abstract:Developing cost efficient, robust, non-precious metal electrocatalysts for oxygen evolution reaction (OER) is a significant challenge in water splitting for renewable energy conversion. A novel electrocatalyst of heterogeneous ultra-thin FeCo-LDH@Co(OH)2 nanosheets derived from 2D Zeolitic imidazolate framework facilitated electrons transfer for OER. DFT calculation revealed that heterogeneous interfaces reduced adsorption energy barriers of intermediates in rate-determining step of OER. The CoOOH with higher CoIII valence state derived from surface reconstruction, which was detected via in-situ Raman spectroscopy, activated O ions to provide higher intrinsic activity. XPS results confirmed that electrons transfer from Co(OH)2 to FeCo-LDH accelerated alkaline OER kinetics. The FeCo-LDH@Co(OH)2–0.5 exhibited low overpotentials of 230 mV at 10 mA cm−2 and maintained long durability for 300 h. This study opened up a new method for design and synthesis of ultrathin LDHs electrocatalysts.

engineering, chemical, environmental
Recent Advances of Two-Dimensional CoFe Layered-Double-hydroxides for Electrocatalytic Water Oxidation

Yi Zhou,Jialai Hu,Lichun Yang,Qingsheng Gao

DOI: https://doi.org/10.1016/j.cclet.2021.10.034

IF: 9.1

2021-01-01

Chinese Chemical Letters

Abstract:Oxygen evolution reaction（OER） is pivotal to drive green hydrogen generation from water electrolysis, but yet is strictly overshadowed by the sluggish reaction kinetics. Earth-abundant and cut-price transitionmetal compounds, particularly Co Fe layered-double-hydroxides（LDHs）, show the distinct superiorities in contrast to noble metals and their derivatives. In this review, we firstly underline their fundamental issues in electrocatalytic water oxidation, including Co Fe LDHs crystal structure, the surface of（hydr）oxides confined to OER and the controversial roles of Fe species, aiming at understanding the structure-related activity and catalytic mechanism. Advanced approaches for optimizing OER activity of Co Fe LDHs are then comprehensively overviewed, which will shed light on the different working mechanisms and provide a concise analysis of their unique advantages. Finally, a perspective on the future development of Co Fe LDHs electrocatalysts is offered. We hope this review can give a concise and explicit guidance for the development of transition-metal-based electrocatalysts in the energy field.
NiFe Layered Double Hydroxide Nanosheets Anchored on Cobalt Nanocrystal Matrixes as Electrocatalysts for Oxygen Evolution

Shuaiwu Zhu,Jianmin Wang,Haijin Li,Jiajia Cai,Yongtao Li,Jing Hu,Yitao He,Yong Zhou

DOI: https://doi.org/10.1021/acsanm.2c02844

IF: 6.14

2022-09-07

ACS Applied Nano Materials

Abstract:One crucial pattern to vigorously develop renewable energy is to exploit high-performance oxygen evolution reaction (OER) electrocatalysts. Therefore, we constructed a nanoscale heterogeneous structure catalyst, NiFe-LDH/Co-NC (LDH = layered double hydroxide; Co-NC cobalt nanocrystal), consisting of ultrasmall NiFe-LDH nanosheets and Co-NC matrixes carbonized from ZIF-67. In 1 M KOH, NiFe-LDH/Co-NC-2 requires only an overpotential of 282 mV to catalyze a current density of 10 mA cm–2 and also has a Tafel slope of 64 mV dec–1, surpassing those of the typical OER electrocatalyst RuO2. Co-NC was able to supply a porous structure and anchoring sites, including improving the electrical conductivity of NiFe-LDH. Modified NiFe-LDH has a highly dispersed nature and therefore exposes more active sites. Moreover, the accelerated electron-transfer process caused by strong interaction between NiFe-LDH and Co-NC dramatically optimized the energy barrier of the OER. This work provides significant guidelines to design a high-performance OER of NiFe-LDH catalysts.

materials science, multidisciplinary,nanoscience & nanotechnology
A High‐Performance Electrocatalyst for Oxygen Evolution Reaction: LiCo0.8Fe0.2O2

Yinlong Zhu,Wei Zhou,Yubo Chen,Jie Yu,Meilin Liu,Zongping Shao

DOI: https://doi.org/10.1002/adma.201503532

2015-01-01

Advances in Materials

Abstract:Layered LiCo0.8 Fe0.2 O2 demonstrates dramatically enhanced oxygen evolution reaction (OER) activity and durability in an alkaline solution over LiCoO2 and other reported state-of-the-art catalysts, including benchmark IrO2 . This superior performance is attributed to Fe-doping-induced synergistic effects.
Universal MOF-Mediated synthesis of 2D CoNi-based layered triple hydroxides electrocatalyst for efficient oxygen evolution reaction

Rui Yu,Dongmei Liu,Mengyu Yuan,Yuan Wang,Changqing Ye,Jie Li,Yukou Du

DOI: https://doi.org/10.1016/j.jcis.2021.06.035

IF: 9.9

2021-11-01

Journal of Colloid and Interface Science

Abstract:Developing low-budget, stable, and high-performance electrocatalyst toward oxygen evolution reaction (OER) is of pivotal significance in the fields of energy conversion and storage. Herein, a universal metal organic framework (MOF)-mediated method for the synthesis of two-dimensional (2D) layered triple hydroxides (LTHs) nanosheets with ultrathin nature has been developed. It is interesting to disclose that the CoNi-based LTHs possess better electrochemical catalytic performance, giving superior performance to commercial RuO2 catalysts. Remarkably, benefitting from the ultrathin nanosheet configuration, optimized electronic structure, and strong synergistic effect, the optimized CoNiFe LTHs nanosheets show excellent OER performance with an ultralow overpotential of 262 mV at a current density of 10 mA cm−2 and a small Tafel slope of 88.1 mV dec-1. This work provides a promising avenue to develop low-cost and high-performance layered ternary hydroxide electrocatalysts.

chemistry, physical
Interface-engineered urchin-like CoFe-layered double hydroxide for high-efficiency electrocatalytic oxygen evolution

Xu Xu Sun,Ruiqi Wang,Qi Wang,Kostya Ken Ostrikov

DOI: https://doi.org/10.1039/d3qi02220j

IF: 7.779

2023-12-31

Inorganic Chemistry Frontiers

Abstract:Oxygen evolution reaction (OER) is the key anode reaction for electrochemical water splitting, while it is severely hindered by the sluggish rection kinetics and insufficient stability of traditional electrocatalysts. To address the urgent need for efficient and low-cost electrocatalysts, a promising heterogenous CoFe-layered double hydroxide-based electrocatalyst (Ce@CoFe-LDH) is developed by a one-step hydrothermal method combined with rapid electrodeposition. The ultrafine Ce(OH)3 nanoparticles effectively trigger the local surface activity of CoFe-LDH nanowires by the interface electron transfer, thereby promoting the improvement of OER activity and stability. Consequently, the Ce@CoFe-LDH electrocatalyst only needs 207 mV overpotential to obtain 10 mA cm-2, while the Tafel slope is only 50.0 mV dec-1, smaller than those of CoFe-LDH catalyst (232 mV, 74.2 mV dec-1, respectively). Importantly, the Ce@CoFe-LDH exhibits remarkable catalytic durability toward OER at 100 mA cm-2 over 120 hours. First-principles theoretical calculations reveal that interface engineering can be used to optimize the electronic structure of Ce@CoFe-LDH by the charge redistribution and thereby decrease the energy barrier of rate-determining step. In addition, the Ce@CoFe-LDH electrocatalyst as anode for water splitting also shows a low cell potential of 1.47 V at 10 mA cm-2 and robust stability at 100 mA cm-2 over 50 hours. Overall, this work provides new insights into designing efficient OER electrocatalysts for scalable water splitting in clean energy and environmental applications.

chemistry, inorganic & nuclear
Enhanced electrocatalytic performance for oxygen evolution reaction via active interfaces of Co3O4arrays@FeOx/Carbon cloth heterostructure by plasma-enhanced atomic layer deposition

Qingying Zhu,Guoyong Yang,Limin Tang,Hongwei Mi,Lingna Sun,Qianling Zhang,Libo Deng,Peixin Zhang,Xiangzhong Ren,Yongliang Li

DOI: https://doi.org/10.1088/1361-6528/acc038

IF: 3.5

2023-03-03

Nanotechnology

Abstract:Oxygen evolution reaction (OER) is a necessary procedure in various devices including water splitting and rechargeable metal-air batteries but required a higher potential to improve oxygen evolution efficiency due to its slow reaction kinetics. In order to solve this problem, a heterostructured electrocatalyst (Co3O4@FeOx/CC) is synthesized by deposition of iron oxides (FeOx) on carbon cloth (CC) via plasma-enhanced atomic layer deposition (PE-ALD), then growth of the cobalt oxide (Co3O4) nanosheet arrays. The deposition cycle of FeOx on the CC strongly influences the in-situ growth and distribution of Co3O4 nanosheets and electronic conductivity of the electrocatalyst. Owing to the high accessible and electroactive areas and improved electrical conductivity, the free-standing electrode of Co3O4@FeOx/CC with 100 deposition cycles of FeOx exhibits excellent electrocatalytic performance for OER with a low overpotential of 314.0 mV at 10 mA cm−2 and a small Tafel slope of 29.2 mV dec−1 in alkaline solution, which is much better than that of Co3O4/CC (448 mV), and even commercial RuO2 (380 mV). This design and optimization strategy shows a promising way to synthesize ideally designed catalytic architectures for application in energy storage and conversion.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Strengthen metal-oxygen covalency of CoFe-layered double hydroxide for efficient mild oxygen evolution

Dazhong Zhong,Tan Li,Dong Wang,Lina Li,Jiancheng Wang,Genyan Hao,Guang Liu,Qiang Zhao,Jinping Li

DOI: https://doi.org/10.1007/s12274-021-3451-7

IF: 9.9

2021-04-24

Nano Research

Abstract:Oxygen evolution reaction (OER) is crucial for hydrogen production as well as other energy storage technologies. CoFe-layered double hydroxide (CoFe-OH) has been widely considered as one of the most efficient electrocatalysts for OER in basic aqueous solution. However, it still suffers from low activity in neutral electrolyte. This paper describes partially oxidized CoFe-OH (PO-CoFe-OH) with enhanced covalency of M-O bonds and displays enhanced OER performance under mild condition. Mechanism studies reveal the suitably enhanced M-O covalency in PO-CoFe-OH shifts the OER mechanism to lattice oxygen oxidation mechanism and also promotes the rate-limiting deprotonation, providing superior OER performance. It just requires the overpotentials of 186 and 365 mV to drive the current density densities of 1 and 10 mA·cm−2 in 0.1 M KHCO3 aqueous solution (pH = 8.3), respectively. It provides a new process for rational design of efficient catalysts for water oxidation in mild conditions.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Stable Iron Hydroxide Nanosheets@Cobalt-Metal-Organic-Framework Heterostructure for Efficient Electrocatalytic Oxygen Evolution.

Zhi Gao,Zhi Wu Yu,Feng Qing Liu,Chuo Yang,Ya Hong Yuan,Yi Yu,Feng Luo

DOI: https://doi.org/10.1002/cssc.201902118

IF: 8.4

2019-01-01

ChemSusChem

Abstract:Most studies are devoted to the use of metal-organic frameworks (MOFs) as templates to construct desirable electrocatalysts in situ by high-temperature pyrolysis. The emergence of heterostructures invokes new opportunities to use the full potential of pristine MOFs as efficient catalysts in the oxygen evolution reaction (OER). Here, a MOF surface-reaction strategy is developed to synthesize MOF-based heterostructures without pyrolysis. Uniform Fe(OH)(3) nanosheets are grown controllably on the Co-MOF-74 surface by a fast "phenol-Fe" reaction that takes advantage of the hydroxyl sites in Co-MOF-74. The resulting Fe(OH)(3)@Co-MOF-74 heterostructure delivers an excellent performance in the OER with a low overpotential of 292 mV at 10 mA cm(-2). Notably, the introduction of Fe can improve the intrinsic activity of the original Co atom significantly. The turnover frequency in Fe(OH)(3)@Co-MOF-74 (1.209 s(-1)) is more than 25 times higher than that in Co-MOF-74 (0.048 s(-1)). This work presents a fresh concept for the fundamental design of advanced pure-MOF-based heterostructures and, thereby, provides a new avenue for the fabrication of other energy-conversion and -storage materials.
Facile synthesis of Co–Fe layered double hydroxide nanosheets wrapped on Ni-doped nanoporous carbon nanorods for oxygen evolution reaction

Jun Zhang,Lin Hao,Zitong Chen,Yongjun Gao,Huan Wang,Yufan Zhang

DOI: https://doi.org/10.1016/j.jcis.2023.06.199

IF: 9.9

2023-06-01

Journal of Colloid and Interface Science

Abstract:Owing to the high demand for clean and renewable energy technologies, several studies have focused on developing economically feasible, highly effective, and stable non-precious electrocatalysts for promoting the oxygen evolution reaction (OER). This development has stimulated an expansion of investigative quests and indicated the importance of advancing electrocatalytic research in this field. Through a facile and efficient method, Ni nanoparticles were uniformly embedded into nanoporous carbon nanorods (Ni-NCN), which are subsequently electrodeposited on CoFe-layered double hydroxide (LDH) nanosheets to produce highly efficient Ni-NCN/CoFe-LDH composites used for OER. The composite exhibited excellent catalytic activity toward OER owing to its low overpotential (ƞ10 mA = 280 mV), small Tafel slope (42 mV dec-1), and excellent durability. The Ni-NCN/CoFe-LDH catalyst exhibited higher OER activity owing to its uniformly dispersed Ni nanoparticles, large specific surface area, enhanced electron transport, and synergistic effect of multiple composites. Additionally, the enhanced synergistic effect of Ni-NCN promoted higher OER performance compared with Ni-undoped carbon nanorod/LDH, indicating that the Ni dopant and LDH significantly contributed to the overall OER performance. The synergistic effect of multiple composites significantly contributed to the excellent OER performance, indicating their potential as OER catalyst.

chemistry, physical
Novel Ni-doped dual MOF-derived urchin-like Co-Fe layered double hydroxides for oxygen evolution reaction

Zhuoxian Tang,Lin Hao,Mingjie Hu,Yongjun Gao,Yufan Zhang

DOI: https://doi.org/10.1016/j.jallcom.2024.176155

IF: 6.2

2024-08-28

Journal of Alloys and Compounds

Abstract:The oxygen evolution reaction (OER) plays a vital role in water splitting for renewable energy generation, making the development of cost-effective electrocatalysts essential in tackling global energy challenges. In this study, we synthesized ZIF-67@MIL-88 using a self-assembly method, with ZIF-67 serving as the precursor, followed by an aging process. The incorporation of iron-based MIL-88 significantly enhanced the surface morphology and porous structure of the catalytic material. Additionally, we prepared urchin-like CoNi@FeNi layered double hydroxides (LDHs) by etching ZIF-67@MIL-88. LDHs are known for their unique two-dimensional sheet structure and corrosion resistance. We achieved efficient OER catalytic activity through interlayer anion exchange by substituting metal cations at high temperatures. This study highlights recent advancements in the rational design of structurally unique and highly effective CoNi@FeNi-LDH composite materials using a synergistic strategy.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Interface Electronic Coupling in Hierarchical FeLDH(FeCo)/Co(OH)2 Arrays for Efficient Electrocatalytic Oxygen Evolution

Fanhao Kong,Wenwen Zhang,Liping Sun,Lihua Huo,Hui Zhao

DOI: https://doi.org/10.1002/cssc.201900943

IF: 8.4

2019-08-08

ChemSusChem

Abstract:The oxygen evolution reaction (OER) with sluggish kinetics is the key half-cell reaction for several sustainable energy systems, such as electrochemical water splitting, fuel cells, and rechargeable metal-air batteries. Two-dimensional transition-metal hydroxides have good prospects for the OER. Herein, 2D hierarchical FeLDH(FeCo)/Co(OH)2 (LDH=layered double hydroxide) arrays were fabricated by growing 2D-ZIF-67 (ZIF=zeolitic imidazolate framework) on carbon cloth, transformation of 2D-ZIF-67 into Co(OH)2 , and electrodeposition of FeLDH(FeCo) on Co(OH)2 at ambient temperature. The optimized hierarchical catalyst exhibits high OER activity that requires a small overpotential of only 242 mV to drive 10 mA cm-2 (279 mV for 100 mA cm-2 ) and prolonged durability for 100 h at 20 mA cm-2 in 1 m KOH. The FeLDH(FeCo)/Co(OH)2 interfaces are observed to be the electrocatalytically active centers for the OER. The interfaces contribute to accelerating the OER kinetics owing to fast transfer of intermediate oxygen species. Furthermore, the FeCo alloy promotes electron transfer among the newly formed interfaces related to CoOOH in the OER process, which leads to improved durability. This work gives insight into the design and synthesis of hierarchical bimetallic hydroxide arrays with high OER activity and durability, as well as understanding of the origin of the OER promotion by metals and metal hydroxides.
2D Fe-containing Cobalt Phosphide/cobalt Oxide Lateral Heterostructure with Enhanced Activity for Oxygen Evolution Reaction

Xuemin Hu,Shengli Zhang,Jingwen Sun,Lei Yu,Xingyue Qian,Rudan Hu,Yining Wang,Hongan Zhao,Junwu Zhu

DOI: https://doi.org/10.1016/j.nanoen.2018.11.047

IF: 17.6

2018-01-01

Nano Energy

Abstract:Two-dimensional (2D) heterostructures have emerged as promising electrocatalysts towards oxygen evolution reaction due to their unique structural and chemical properties. Moreover, 2D lateral heterostructure with the coupled interface in-plane rather than the vertical direction enables to expose more active sites to catalyst surface, and thus facilitates the OER catalytic activity. Here, 2D FeCo layered double hydroxide/cobalt oxide (FeCo LDH/CoO) nanosheets are synthesized via an instantaneous method utilizing molten alkali as both solvent and reactant. Upon a selective low-temperature phosphorization, 2D Fe-containing cobalt phosphide/cobalt oxide (Fe-CoP/CoO) lateral heterostructure with the optimized electronic structure and activated electronic coupling interface is obtained and exhibits superior catalytic activity (eta= 219 mV at 10 mA cm(-2)) compared to most of the reported electrocatalysts towards OER in alkaline electrolyte. Besides, both of the experimental characterization and DFT calculation are performed to illustrate the detailed mechanism of the attractive OER activity. It is uncovered that the coupled interface between CoP and CoO induces the redistribution of electrons, facilitates the adsorption of OFF anions easily, and thus optimizes Gibbs free energies for water oxidation.
A Dynamically Stable Self-Assembled CoFe (Oxy)hydroxide-Based Nanocatalyst with Boosted Electrocatalytic Performance for the Oxygen-Evolution Reaction

Ming Zhu,Hengyue Xu,Jie Dai,Daqin Guan,Zhiwei Hu,Sixuan She,Chien-Te Chen,Ran,Wei Zhou,Zongping Shao

DOI: https://doi.org/10.1039/d4ta01848f

IF: 11.9

2024-01-01

Journal of Materials Chemistry A

Abstract:Surface reconstruction or elemental leaching is generally involved in the oxygen evolution reaction (OER) process on transition metal-based oxides during alkaline water electrolysis, which gives rise to both opportunities and challenges for the development of OER electrocatalysts. Reaction-derived metal (oxy)hydroxides have been proven to be the actual active species for many metal oxides but have suffered from the dissolution of active elements. Here, the construction of a dynamically stable CoFe (oxy)hydroxide OER nanocatalyst is proposed, which delivers a low overpotential of 253 mV at 10 mA cm-2 and high mass activity (3.78 A mg-1 at an overpotential of 300 mV), among the highest of all the hydroxides reported previously. The in situ synthesized nanocatalyst acts as a stable CoOxHy host for Fe adsorption and facilitates active Co-O-Fe motif formation. The weak metal-O coordination environment and hydrophilic surface morphology lead to superficial mass transfer. The drawbacks of Fe depletion for conventional CoFe (oxy)hydroxides are overcome, attributed to tardy lattice oxygen ion diffusion and dynamic Fe-saturated dual metal active sites, which lead to a stable performance for over 100 h. This study provides a design strategy for OER electrocatalysts with both high mass activity and durability, which shows application prospects for large-scale electrochemical water splitting. A self-assembled CoFe (oxy)hydroxide nanocatalyst exhibits high mass activity and dynamic stability and overcomes the inherent defects of CoFe LDH for OER catalysis.
Synthesis of Pt-doped CoFe layered double hydroxide derived from zeolitic imidazolate framework for efficient electrochemical oxygen evolution reaction

Xiaofeng Wang,Yangping Zhang,Tianpeng Liu,Zhengying Wu,Jun Yu,Yukou Du

DOI: https://doi.org/10.1016/j.jcis.2024.08.111

2024-08-20

Abstract:Zeolitic imidazolate frameworks (ZIFs), a class of promising metal organic frameworks (MOFs) material, display high porosity and chemical/thermal stability. However, there are problems such as few active sites and restricted exposed active areas, which limit the oxygen evolution reaction (OER) performance of catalysts. Here, starting from zeolitic imidazolate framework-67 (ZIF-67), we have successfully synthesized Pt-doped CoFe layered double hydroxide (Pt/CoFe LDH) catalysts for efficient OER catalysis. The obtained Pt/CoFe LDH-4 catalysts provides large surface areas and abundant active sites, which further improves the OER performance. In detail, the Pt/CoFe LDH-4 exhibits a lower overpotential of 263 mV at a current density of 40 mA cm-2, in 1 M KOH solution, the stability of the catalyst exceeds 120 h at this current density, far superior to commercial catalyst RuO2. This study describes a new design idea for synthesis of LDH catalytic materials with low noble metal doping, which broadens the way to the synthesis of robust OER catalysts derived from ZIF-67.
Constructing a CeO2−x@CoFe-layered Double Hydroxide Heterostructure As an Improved Electrocatalyst for Highly Efficient Water Oxidation

Yiming Hu,Wenjun Liu,Kun Jiang,Li Xu,Meili Guan,Jian Bao,Hongbing Ji,Huaming Li

DOI: https://doi.org/10.1039/d0qi01003k

IF: 7.779

2020-01-01

Inorganic Chemistry Frontiers

Abstract:CeO2−x@CoFe LDH/NF acts as a high-efficiency OER electrocatalyst and used in 1.0 M KOH and in simulated alkaline seawater (1.0 M KOH + 0.5 M NaCl).
Embedding Ultrafine Metal Oxide Nanoparticles in Monolayered Metal–Organic Framework Nanosheets Enables Efficient Electrocatalytic Oxygen Evolution

Wang Zhang,Yu Wang,Han Zheng,Rui Li,Yujia Tang,Boyuan Li,Chao Zhu,Liming You,Min-Rui Gao,Zheng Liu,Shu-Hong Yu,Kun Zhou

DOI: https://doi.org/10.1021/acsnano.9b08458

IF: 17.1

2020-01-30

ACS Nano

Abstract:The development of highly efficient electrocatalysts to reduce overpotentials is vital for accelerating the sluggish oxygen evolution reaction (OER) processes. Herein, we demonstrate ultrathin heterogeneous nanosheets as a promising OER electrocatalyst, which are composed of ultrafine CoFeOx nanoparticles and a monolayered CoN4-based metal–organic framework (MOF) matrix. The embedding of such inorganic nanoparticles in the MOF lattice creates metal Co sites located at the CoFeOx/MOF interfaces. Structural characterization and analysis indicated a higher valence and changed 3d electronic configuration for the interfacial Co in contrast to the CoN4 sites. Furthermore, theoretical calculations reveal the high activity of interfacial Co sites for OER. Electrochemical studies confirm that the ultrathin heterogeneous nanosheets deposited on carbon cloth can achieve an excellent electrocatalytic OER performance with a low overpotential of 232 mV at a current density of 10 mA cm–2 with good stability. This work provides insights on the development of ultrathin OER heterocatalysts with highly active interfaces of inorganic units and MOFs.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology

Single-layer CoFe hydroxides for efficient electrocatalytic oxygen evolution

Self-Supported Low-Crystallinity Cofe Layered Double Hydroxide Nanospheres on Monolayer Ti3c2 Electrode for Oxygen Evolution Reaction

Defective Layered NiFe Double Hydroxides Anchored on Self-Supported CoNi-nitrogen Doped Carbon Nanotube Composite As Advanced Electrocatalyst for Oxygen Evolution Reaction

Design yolk-shelled FeCo layered double hydroxide via a "one-stone-two-birds" strategy for oxygen evolution reaction

Heterogeneous ultra-thin FeCo-LDH@Co(OH)2 nanosheets facilitated electrons transfer for oxygen evolution reaction

Recent Advances of Two-Dimensional CoFe Layered-Double-hydroxides for Electrocatalytic Water Oxidation

NiFe Layered Double Hydroxide Nanosheets Anchored on Cobalt Nanocrystal Matrixes as Electrocatalysts for Oxygen Evolution

A High‐Performance Electrocatalyst for Oxygen Evolution Reaction: LiCo0.8Fe0.2O2

Universal MOF-Mediated synthesis of 2D CoNi-based layered triple hydroxides electrocatalyst for efficient oxygen evolution reaction

Interface-engineered urchin-like CoFe-layered double hydroxide for high-efficiency electrocatalytic oxygen evolution

Enhanced electrocatalytic performance for oxygen evolution reaction via active interfaces of Co3O4arrays@FeOx/Carbon cloth heterostructure by plasma-enhanced atomic layer deposition

Strengthen metal-oxygen covalency of CoFe-layered double hydroxide for efficient mild oxygen evolution

Stable Iron Hydroxide Nanosheets@Cobalt-Metal-Organic-Framework Heterostructure for Efficient Electrocatalytic Oxygen Evolution.

Facile synthesis of Co–Fe layered double hydroxide nanosheets wrapped on Ni-doped nanoporous carbon nanorods for oxygen evolution reaction

Novel Ni-doped dual MOF-derived urchin-like Co-Fe layered double hydroxides for oxygen evolution reaction

Interface Electronic Coupling in Hierarchical FeLDH(FeCo)/Co(OH)2 Arrays for Efficient Electrocatalytic Oxygen Evolution

2D Fe-containing Cobalt Phosphide/cobalt Oxide Lateral Heterostructure with Enhanced Activity for Oxygen Evolution Reaction

A Dynamically Stable Self-Assembled CoFe (Oxy)hydroxide-Based Nanocatalyst with Boosted Electrocatalytic Performance for the Oxygen-Evolution Reaction

Synthesis of Pt-doped CoFe layered double hydroxide derived from zeolitic imidazolate framework for efficient electrochemical oxygen evolution reaction

Constructing a CeO2−x@CoFe-layered Double Hydroxide Heterostructure As an Improved Electrocatalyst for Highly Efficient Water Oxidation

Embedding Ultrafine Metal Oxide Nanoparticles in Monolayered Metal–Organic Framework Nanosheets Enables Efficient Electrocatalytic Oxygen Evolution