Abstract:Failure response of the modern high strength steel grades shows a diverse pattern compared to the conventional highly ductile steels. In automotive sheet forming applications of the high strength steels, fracture could be observed prior to necking or the post necking deformation is very limited. The differences in the underlying damage mechanisms contribute to the different ways of damage development and the interaction of damage with plastic localization and strain hardening creates various failure patterns. Therefore, it is critical to clearly identify the phase for damage initiation and understand the relation between plastic localization, damage and fracture, as these patterns significantly influence the safety assessment in the forming process of steels. Inverse modelling approaches are being used to bridge the gap between experiments and numerical simulations. However, this technique shows significant discrepancies when strain heterogeneity is experienced, especially since the determination of the material parameters is based on comparison on a global scale with force and elongation measurements. An iterative finite element model update (FEMU) procedure integrated with optical full field measurement technique was executed which extended the possibilities to identify the material ductile damage and fracture behavior on a local level with significantly higher accuracy. To identify the material plastic and damage behavior of the automotive dual phase steel (DP-K1000) under study, experiments are conducted on dog-bone, notched tensile, central hole and shear specimens at various strain rates. Full field deformation data was obtained by digital image correlation (DIC). A vigorous and general framework for the inverse identification of the strain hardening behavior up to fracture of the automotive high strength steel was studied. A hybrid damage mechanics model (extended Modified Bai-Wierzbicki) that combines a phenomenological criterion for damage initiation related to the microstructure degradation of materials and a continuum damage mechanics based damage evolution law for progressive damage accumulation till final fracture is employed using a VUMAT in the finite element (FE) scheme. To exclude the convergence (plastic instability) problems, a displacement driven finite element simulation was used while minimizing the discrepancy between the experimental and numerical surface strain fields and force values. A visual mapping procedure was adopted to realize identical reference frames and therefore identical peripheries for the specimen in DIC and FE model. This mapping includes a transformation and interpolation function from FE results to the DIC datum points. Successful identification of the material parameters was achieved based on a combined Gauss-Newton and Levenberg-Marquardt algorithm which require the evaluation of the gradient of the objective function to update the unknown parameters in an appropriate direction. The optimization problem of the inverse modelling in the current work was described by a cost function based on the least square norm of the differences of the surface strain fields. Overall cost function formulation is not dependent on the experimental or finite element meshes and includes rigid body motions. The residual was minimized at once for all the displacements by Gauss-Newton scheme in space-time, which is defined by spatial domain and temporal domain. The optimization of the constitutive parameters was directly achieved by minimizing this image residual in an iterative manner. The adopted methodology helped in determining macroscopic crack initiation instant and location from experiments. Local variables such as equivalent plastic strain, stress triaxiality and Lode angle parameter were evaluated from the critical element for the determination of the damage initiation locus which was then fitted by a non-linear least squares method with a trust-region algorithm in Matlab. The identified damage initiation locus and plastic localization phenomena served as an evaluation criteria for the formability of the dual phase automotive steel.

Investigation of the History-dependent Nonlinear Micro-viscoplasticity Behavior of Dual-phase Steel using Crystal Plasticity Finite Element Method

Computational Martensite Re-Orientation in Shape Memory Alloys and the Related Hysteretic Dynamics

Extensive anisotropic lath martensite plasticity in dual-phase steels: A numerical-experimental investigation

Investigation of failure mechanisms in dual-phase steels through cohesive zone modeling and crystal plasticity frameworks

A Multi-Phase Model for Transformation Plasticity Using Thermodynamics-Based Metallurgical Algorithm

Phase transformation and plastic behavior of QP steel sheets: Transformation kinetics-informed modeling and forming limit prediction

Material models for the thermoplastic material behaviour of a dual-phase steel on a microscopic and a macroscopic length scale

Microstructure-Based Modeling of Deformation in Steels Based on Constitutive Relationships from Micropillar Compression

A micro mechanical study on tensile behavior of steel sheets with spheroidal cementite using crystal plasticity finite element method

A Unique Numerical Iterative Approach for Modelling Individual Phase Stress-Strain Curves in Dual Phase Steel

Prediction of grain refinement using multiscale crystal plasticity-integrated dislocation density-based model in multiphase steel alloys

Understanding plasticity in multiphase quenching & partitioning steels: Insights from crystal plasticity with stress state-dependent martensitic transformation

Crystal Plasticity Model Analysis for the Macro-to-Micro Mechanical Behavior of Different Sub-Regions in a Marine Steel Weld

Revealing plastic localization and ductile damage initiation features with integrated DIC and FEM

On the mechanical heterogeneity in dual phase steel grades: Activation of slip systems and deformation of martensite in DP800

Microscale mechanisms of plasticity and damage in advanced multi-phase steels

Micro-thermomechanical Constitutive Model of Transformation Induced Plasticity and Its Application on Armour Steel

A micro-mechanical model of non-thermo-elastic martensitic transformation

Kinetics and microstructure evolution of dynamic recrystallization of medium-Mn steel during hot working

Investigation of evolving yield surfaces of dual-phase steels

Microscopic plasticity and damage in two-phase steels: On the competing role of crystallography and phase contrast