Rail Flaw Detection via Kolmogorov Entropy of Chaotic Oscillator Based on Ultrasonic Guided Waves

Ziyan Zeng,Jing Wu,Mingfang Zheng,Hongwei Ma

DOI: https://doi.org/10.3390/s24092730

IF: 3.9

2024-04-26

Sensors

Abstract:Ultrasonic guided wave (UGW) inspection is an emerging non-destructive testing(NDT) technique for rail flaw detection, where weak UGW signals under strong noise backgrounds are difficult to detect. In this study, a UGW signal identification model based on a chaotic oscillator is established. The approach integrates the UGW response into the critical state of the Duffing system to serve as a disturbance control variable. By evaluating the system's motion state before and after introducing the UGW response, identification of UGW signals can be realized. Thus, the parameters defining the critical state of Duffing oscillators are determined by Ke. Moreover, an electromagnetic transducer was specifically devised to enable unidirectional excitation for UGWs targeted at both the rail base and rail head. Experimental studies showed that the proposed methodology effectively detected and located a 0.46 mm notch at the rail base and a 1.78 mm notch at the rail head. Furthermore, Ke was directly proportional to the notch size, which could be used as a quantitative index to characterize the rail flaw.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation

What problem does this paper attempt to address?

### Problems Addressed by the Paper

The paper aims to address several key issues in railway defect detection:

1. **Weak Signal Detection Challenge**: In a strong noise background, ultrasonic guided wave (UGW) signals are usually weak and difficult to detect effectively. Existing signal processing methods such as time-frequency analysis and wavelet transform can reduce noise but decrease the sensitivity of damage detection.

2. **Quantitative Characterization of Defects**: Current methods can only qualitatively assess and locate defects, making it difficult to quantitatively characterize the size of defects.

3. **Non-contact Sensor Design**: Existing piezoelectric acoustic transducers are greatly affected by coupling conditions, limiting their application in engineering fields. Therefore, developing a non-contact UGW sensor is crucial.

### Solutions

To address the above issues, the paper proposes the following methods:

1. **UGW Signal Recognition Model Based on Chaotic Oscillator**: By integrating the UGW response into the critical state of the Duffing system as a disturbance control variable, the change in the system's motion state is evaluated to achieve UGW signal recognition. Kolmogorov entropy (Ke) is used as a quantitative indicator to describe the motion state of the chaotic oscillator system.

2. **Design of Electromagnetic Acoustic Transducer (EMAT)**: An EMAT capable of unidirectional excitation is designed to enhance the forward guided wave mode and suppress the reverse mode, thereby improving the signal-to-noise ratio.

3. **Experimental Verification**: The effectiveness of the proposed methods is verified through experiments, including detecting artificial notches of different sizes at the bottom and head of the railway, and identifying these defects using the Duffing oscillator system.

### Experimental Results

The experimental results show that the proposed Duffing oscillator system based on Kolmogorov entropy can effectively detect and locate notches of 0.46 mm at the bottom and 1.78 mm at the head of the railway. Additionally, Ke is proportional to the notch size, which can be used as an indicator for quantitatively characterizing railway defects.

In summary, the paper proposes a new railway defect detection method by combining chaos theory and electromagnetic acoustic technology, addressing the shortcomings of existing methods in weak signal detection, quantitative characterization, and non-contact sensor design.