A high-performing sawtooth plasma actuator with multi-electrodes

Chi Wai Wong,Xiao Shao,Longjun Wang,Yu Zhou

DOI: https://doi.org/10.1016/j.ast.2021.107221

IF: 5.457

2021-12-01

Aerospace Science and Technology

Abstract:The present study for the first time develops a high performing sawtooth plasma actuator (PA) that may produce large flow velocity u and streamwise vorticity ω x ′ by means of increasing the number of electrodes. This improved performance is crucial for improving the post-stall airfoil aerodynamics. It is found that the high performing sawtooth PA with three encapsulated electrodes powered by + V d c (hereafter called the optimum sawtooth PA) produces the maximum ω x ′ and u of 650 s−1 and 6.83 m/s, respectively. The plasma-induced flow is linked to the acceleration of the negatively charged species in the streamwise direction caused by the + V d c -powered encapsulated electrodes and is 26.5% larger than that produced by a standard sawtooth PA (with two sawtooth electrodes) under the same power consumption. At a chord Reynolds number R e = 1.0 × 10 5 , the optimum sawtooth PA under steady mode actuation postpones the stall angle-of-attack α of a NACA 4412 airfoil by 4° and increases the maximum lift coefficient C L by 8.1%; the former is appreciably larger than that (0°) achieved by the standard sawtooth PA. Furthermore, under the optimum burst mode actuation (non-dimensional burst frequency F + = 1.4 and duty cycle D C = 7 %), the stall α and the maximum C L increase by 5° and 19.6%, respectively, along with a 93% power saving. The physical mechanisms behind the impressive performance are discussed.

engineering, aerospace