Abstract:Graphene oxide (GO) is a two-dimensional material that adds functionalized oxygen-containing groups on the surface of graphene through strong acid oxidation. The oxygen-containing functional groups on the surface make GO have good dispersion and surface activity. When GO is incorporated into cement-based materials, while providing nucleation sites for cement hydration, it can also react with ions released by cement hydration. Therefore, GO has a catalytic effect on the hydration process of cement and plays a role in regulating the morphology of the hydration products, which in turn affects the formation of the microstructure of cement-based materials. In this study, the catalytic and regulatory effects of GO on the hydration characteristics, pore structure, and internal interface of cement-based materials are reviewed. The analysis shows that the oxygen-containing functional groups on the surface of GO can absorb a large number of water molecules, promote the dissolution of cement particles in water, and adsorb the Ca2+ released by cement particles, thereby reducing the concentration of Ca2+ around the cement particles and shortening the induction period of cement hydration. In addition, GO can provide more nucleation sites for cement hydration and shorten the hydration acceleration period. GO promotes the formation of hydration products through the nucleation effect and gradually transforms needle-like and rod-like hydration products into flower-like or polyhedral-like crystals. In addition, GO optimizes the pore structure of cement-based materials when it affects cement hydration and the morphology of hydration products through the above-mentioned effects. In addition, it makes the connection between hydration products closer through the bridging effect, so that the total porosity of cement-based materials decreases, gel-pore content increases, capillary-pore content decreases, and pore structure is significantly optimized. Finally, while optimizing the pore structure of cement-based materials, GO has an obvious optimization effect on the interface transition zone (ITZ) of cement-based materials, which significantly reduces the ITZ width and increases the ITZ density.

The dispersion and influence of graphene oxide modified polycarboxylate superplasticizer in alkaline cement solution

Defoaming and Toughening Effects of Highly Dispersed Graphene Oxide Modified by Amphoteric Polycarboxylate Superplasticizer on Oil Well Cement

Impact of the microstructure of polycarboxylate superplasticizers on the dispersion of graphene

Effect of graphene oxide on mechanical properties of UHPC and analysis of micro-control mechanism

Adsorption and dispersion capability of polycarboxylate-based superplasticizers: a review

Dispersion of graphene oxide and its application prospect in cement-based materials: a review

Chemical interference between graphene oxide and polycarboxylate superplasticizer, and the resulting impact on the concrete strength, workability, and microstructure

Interaction mechanisms between polycarboxylate superplasticizers and cement, and the influence of functional groups on superplasticizer performance: a review

The Influence of Graphene Oxide on the Hydration and Mechanical Properties of Cement-Based Materials with Low Water-Binder Ratio

Study on the Effect of Residual Polymer Superplasticizer on the Properties of Graphene–Cement Composites

Uniformly Dispersed and Re-Agglomerated Graphene Oxide-Based Cement Pastes: A Comparison of Rheological Properties, Mechanical Properties and Microstructure

Novel synthesis of polycarboxylate superplasticizer through ATRP technique used in cement paste: Microstructure and effectiveness analysis

Catalysis and Regulation of Graphene Oxide on Hydration Properties and Microstructure of Cement-Based Materials

Unlocking cementitious performance: nano‐lubrication via polycarboxylate superplasticizers

Effects of PCE on the Dispersion of Cement Particles and Initial Hydration

Preparation of a Three-Dimensional Modified Graphene Oxide Via RAFT Polymerization for Reinforcing Cement Composites

Study on rheological, adsorption and hydration properties of cement slurries incorporated with EPEG-based polycarboxylate superplasticizers

The synthesis and adsorption–dispersion properties of PPEGMA–PVPA copolymers in cement paste

Study on the Effect of Main Chain Molecular Structure on Adsorption, Dispersion, and Hydration of Polycarboxylate Superplasticizers

Comb polymer with ionic side chains as a novel dispersant for cement slurries: Synthesis, characterization and working mechanism

Hydroxylated Graphene: A Promising Reinforcing Nanofiller for Nanoengineered Cement Composites