Abstract:Amassive number of lithium ion (Li-ion) batteries are used in electric vehicles and the number is still growing rapidly. Li-ion batteries are sensitive to temperature—they likely degrade in an over-cold or an over-hot environment. Battery thermal management systems (BTMSs) are designed to control the battery temperature within the optimal range between 20 and 55°C. Thermal management is one important part of battery management systems. A good BTMS allows researchers to improve the performance, extend the life, and enhance the safety of a battery. We launch this Research Topic to collect the latest technologies and design methodology on BTMSs. Three papers have been published in this issue. Yang et al. designed a semiconductor refrigeration system for a 48 V Li-ion battery pack which often operates at high discharge/charge rates, as shown in Figure 1A. A thermal model of the BTMS was also developed for this semiconductor-based BTMS. This BTMS is integrated with air cooling, limiting the maximum temperature to less than 40°C, as long as the temperature difference is less than 1.6°C. The semiconductor-based BTMS is effective when the battery temperature and discharge rate are high. Wang et al. applied a flat heat pipe (FHP) to a BTMS, utilizing the extremely high thermal dissipation ability of the FHP to remove the heat from the battery, as well as to improve the temperature homogeneity among battery cells. The BTMS structure is presented in Figure 1B. A thermal network model was also developed for this BTMS and the simulation agreed with the experiment data. The thickness, porosity, and particle diameter of a sintered wick on the thermal performance of the battery was investigated and the FHP was optimized. An FHP allows a radiator to be placed aside the battery pack as a condensation sector, making the battery pack compact. Luo et al. designed a novel direct liquid cooling BTMS. With a unique structure shown in Figure 1C, the BTMS can be used for cylindrical battery cells with water as the thermal fluid, without worrying about the potential risks of the electric conductivities of water. A numerical model was developed and validated with the system. They investigated the effects of the coolant flowrate and suggested a high flowrate (>500 mL/min) is needed for the discharge at a rate above 3C of a 20-cell module. Multiple inlets were also suggested to improve the temperature uniformity. These studies have shown new prototypes of battery cooling with semiconductors, heat pipes, and direct liquid cooling, which could provide alternatives for thermal management in commercial battery modules. Edited and reviewed by: Sheng S. Zhang, United States Army Research Laboratory, United States

Battery thermal management systems based on nanofluids for electric vehicles

Advancements and comprehensive overview of thermal management systems for lithium-ion batteries: Nanofluids and phase change materials approaches

Numerical investigation and optimization of liquid battery thermal management system considering nanofluids, structural, and flow modifications under high discharge cycles

Battery thermal management systems: Recent progress and challenges

Research progress on efficient battery thermal management system (BTMs) for electric vehicles using composite phase change materials with liquid cooling and nanoadditives

Enhancement of an Air-Cooled Battery Thermal Management System Using Liquid Cooling with CuO and Al2O3 Nanofluids under Steady-State and Transient Conditions

Configuration, design, and optimization of air-cooled battery thermal management system for electric vehicles: A review

Optimization, Modelling and Analysis of Air-Cooled Battery Thermal Management System for Electric Vehicles

Advancements in Battery Thermal Management for High-Energy-Density Lithium-Ion Batteries in Electric Vehicles: A Comprehensive Review

Developments in battery thermal management systems for electric vehicles: A technical review

Thermal management of lithium-ion batteries with nanofluids and nano-phase change materials: a review

Editorial: Advanced Battery Thermal Management Systems

A Review on Battery Thermal Management for New Energy Vehicles

Battery Thermal Management System Design: Role of Influence of Nanofluids, Flow Directions, and Channels

Identification and Mitigation of Shortcomings in Direct and Indirect Liquid Cooling-Based Battery Thermal Management System

Hybrid Battery Thermal Management System in Electrical Vehicles: A Review

Thermal management for prevention of failures of lithium ion battery packs in electric vehicles: A review and critical future aspects

Recent advancements in battery thermal management system (BTMS): A review of performance enhancement techniques with an emphasis on nano-enhanced phase change materials

A state-of-the art review on advancing battery thermal management systems for fast-charging