Effects of leading-edge separation on the vortex-induced vibration of an elongated bluff body

Guiyue Duan,Shujin Laima,Wenli Chen,Hui Li
DOI: https://doi.org/10.1016/j.jweia.2020.104500
IF: 4.437
2021-02-01
Journal of Wind Engineering and Industrial Aerodynamics
Abstract:<p>Wind-tunnel experiments were conducted to investigate the effects of leading-edge separation on the vortex-induced vibration (VIV) of an elastically-supported elongated bluff body. Solid wind barriers of various heights were fixed in the leading edge to adjust the flow separation. The vibration signals and the flow field information are acquired simultaneously by a laser-displacement system and particle image velocimetry (PIV) instrument respectively. The result shows that the VIV is excited by consecutive vortices shedding from the leading-edge shear layer. There is a critical height-to-thickness ratio <span class="math"><math>(h/t)critical=0.4</math></span>, the VIVs are observed when <span class="math"><math>h/t≥0.4</math></span>, while they are suppressed owing to the insignificant leading-edge separation when <span class="math"><math>h/t&lt;0.4</math></span>. Three types of VIV are found, two of them are torsional VIV while another one is vertical VIV, which are named T1, T2, and V1 respectively. By placing a wake splitter plate at the trailing edge, V1 is suppressed entirely, T1 is weakened despite the slightly lower amplitude, while T2 transits to limit-cycle oscillations. The flow field information shows that the evolution and shedding pattern of leading-edge vortices vary from mode to mode. The status of the upper-layer leading-edge separated layer significantly affects the formation and the shedding of the trailing-edge vortices. The results reveal that leading-edge separation can play a dominant role in the vortex-induced vibrations of elongated bluff bodies.</p>
mechanics,engineering, civil
What problem does this paper attempt to address?