Abstract:BackgroundAn induction motor is at the heart of every rotating machine and hence it is a very vital component. Almost in every industry, around 90% of the machines apply an induction motor as a prime mover. It is a very important driving unit of the machine. Hence, it is necessary to monitor its condition to avoid any catastrophic failure and stoppage of production. The breakdown of the induction motor would not be affordable due to remarkable financial loss, unpredicted shutdown, and the associated repair cost.PurposeVibration is a manifestation of induction motor due to the issues in alignment, balancing, and clearances. Bearing, the most vulnerable to failure due to continuous working under fatigue loading leads to defects. These defects cause changes in the vibration signature over time. The vibration monitoring techniques helps to effectively diagnose mechanical faults such as bearing defect and stator rotor rub. The purpose of this review paper is to summarize the major faults in induction motor, recent diagnostics methods augmented with advanced signal processing techniques, and real-life applications in electric vehicles. It also discusses possible research gaps and opportunities to contribute based on the review findings in the field of condition monitoring.MethodsThis article presents a detailed review of recent trends in the research of condition monitoring and fault diagnosis of the induction motor. The emphasis is given on the major faults in the induction motor covering time-domain, frequency-domain, and time–frequency domain methods along with an application of artificial intelligence techniques for fault detection.Review FactorThis article presents a comprehensive review of literature which highlights the development and new propositions by researchers in the field of diagnostic techniques for the different faults of induction motor in the last decade. Researchers documented applications of the different conventional methods, advanced signal processing techniques, and soft computing techniques for fault identification of induction motor. This review is carried out for fault identification of induction motor used in machines in general and in particular for identifying the faults in an induction motor of an electric vehicle. A dedicated discussion on the review findings, research gaps, future trends in the field of condition monitoring of induction motor is presented. Condition monitoring of the induction motor in an electric vehicle is also discussed in this paper.ConclusionsIt is observed that the vibration-based techniques are reported to be effective for the identification of mechanical faults while motor current signature analysis is effective for electrical fault in an induction motor. The review presented to analyze the suitability of various condition monitoring techniques for the induction motor fault identification in general and particularly its application in an electric vehicle. It is observed that the diagnosis of faults at the incipient level without using the signal processing technique is challenging. Fault diagnosis of induction motor has witnessed the changes from traditional diagnosis techniques to advanced techniques with a hybrid application of signal processing and artificial intelligence techniques. Still, there is a potential of improvement in reliability, efficiency, robustness, computational time, and real-time diagnostics of faults in IM.

Recent developments of induction motor drives fault diagnosis using AI techniques

Fault diagnosis using Neural-Fuzzy technique based on the simulation results of stator faults for a three-phase induction motor drive system

Signal based condition monitoring techniques for fault detection and diagnosis of induction motors: A state-of-the-art review

Review of Artificial Intelligence Methods in Motor Fault Diagnosis

A new condition monitoring and fault diagnosis system of induction motors using artificial intelligence algorithms

Artificial intelligence for fault diagnosis of rotating machinery: A review

ANN-based fault diagnosis of induction motor under stator inter-turn short-circuits and unbalanced supply voltage

A Review of Artificial Intelligence Methods for Condition Monitoring and Fault Diagnosis of Rolling Element Bearings for Induction Motor

A Review Of Fault Diagnosis For Traction Induction Motor

Induction Motor Failure Identification Based on Multiscale Acoustic Entropy Feature Selection and Hierarchical Adaptive Neuro-Fuzzy Inference System with Localized Recurrent Input

Review of Fault Detection and Diagnosis Techniques for AC Motor Drives

Review of Fault Diagnosis Methods for Induction Machines in Railway Traction Applications

State-of-the-Art Techniques for Fault Diagnosis in Electrical Machines: Advancements and Future Directions

Induction Motors Fault Diagnosis Using Finite Element Method: A Review

A review and comparison of fault detection and diagnosis methods for squirrel-cage induction motors: State of the art

Condition Monitoring and Fault Diagnosis of Induction Motor

Review and Development Trends of On-line Fault Detection Techniques of Induction Motors

Machine Learning Based Mechanical Fault Diagnosis and Detection Methods: A Systematic Review

Statistical Neural Networks for Induction Machine Fault Diagnosis and Features Processing Based on Principal Component Analysis

Fault Diagnosis of Induction Motor Based on Artificial Immune System

Artificial Intelligence Approaches to Fault Diagnosis in Power Grids: A Review