Lattice expansion and oxygen vacancy of α-Fe2O3 during gas sensing

Zhengmao Cao,Zhongwei Jiang,Liping Cao,Yao Wang,Changhao Feng,Chengzhi Huang,Yuanfang Li

DOI: https://doi.org/10.1016/j.talanta.2020.121616

IF: 6.1

2021-01-01

Talanta

Abstract:Identifying the nature of gas-sensing material under the real-time operating condition is very critical for the research and development of gas sensors. In this work, we implement in situ Raman and XRD to investigate the gas-sensing nature of α-Fe₂O₃ sensing material, which derived from Fe-based metal-organic gel (MOG). The active mode of α-Fe₂O₃ as gas-sensing material originate from the thermally induced lattice expansion and the changes of surface oxygen vacancy of α-Fe₂O₃ could be reflected from the further monitored Raman scattering signals during acetone gas sensing. Meanwhile, the prepared α-Fe₂O₃ gas sensor exhibits excellent gas-sensing performance with high response value (R_a/R_g = 27), rapid response/recovery time (1 s/80 s) for 100 ppm acetone gas, and broad response range (5 - 900 ppm) at 183 °C. Strategies described herein could provide a promising approach to obtain gas-sensing materials with excellent performance and unveil the gas-sensing nature for other metal-oxide-based chemiresistors.

chemistry, analytical

What problem does this paper attempt to address?

The problems that this paper attempts to solve are: How to reveal the gas - sensing essence of α - Fe₂O₃ gas - sensitive materials under actual working conditions by in situ Raman spectroscopy, and design gas - sensitive materials with more excellent performance.

### Specific problem decomposition:
1. **Improve the performance of gas - sensitive materials**
The paper aims to develop a simple and less time - consuming method to prepare α - Fe₂O₃ materials with excellent gas - sensitive properties. The traditional hydrothermal method for preparing α - Fe₂O₃ requires a long reaction time (12 - 24 hours), while this paper proposes a one - step calcination method based on a metal - organic gel (MOG) precursor, which significantly shortens the preparation time.

2. **Understand the gas - sensitive mechanism**
By combining in situ Raman spectroscopy and X - ray diffraction (XRD) techniques, the lattice expansion and oxygen vacancy changes of α - Fe₂O₃ during the gas - sensing process are studied. These changes are considered to be the key factors for the activity of gas - sensitive materials.

3. **Real - time monitoring of the gas - sensitive process**
The in situ Raman spectroscopy is used to real - time monitor the changes in Raman scattering signals of α - Fe₂O₃ during the acetone gas - sensing process, including the changes in intensity, full width at half - maximum (FWHM) and scattering frequency. This helps to deeply understand the interaction between gas - sensitive materials and gas molecules.

4. **Expand the application range**
The proposed research strategy is not only applicable to α - Fe₂O₃, but can also be extended to other metal - oxide - based chemoresistors, providing a general method for revealing their gas - sensitive essence.

### Core formula summary:
- **Gas - sensitive reaction mechanism formula**
\[
OV+O_2(g)+e^-\leftrightarrow OO
\]
\[
OO + CH_3COCH_3\leftrightarrow OV+e^-+\text{oxidation products}
\]

- **Acetone concentration calculation formula**
\[
C=\frac{24\times\rho\times V_1\times1000}{M\times V_2}
\]
where:
- \(C\) (ppm) is the acetone concentration,
- \(\rho\) (g/mL) is the acetone density (0.788 g/mL),
- \(V_1\) (\(\mu L\)) is the added acetone volume,
- \(V_2\) (L) is the chamber volume (1 L),
- \(M\) (g/mol) is the acetone molecular weight (58.08 g/mol).

Through the above methods, the paper successfully reveals the lattice expansion and oxygen vacancy changes of α - Fe₂O₃ gas - sensitive materials in the working state, and proposes new ideas for improving the performance of gas - sensitive materials.