Abstract:Organic solar cells (OSCs) based on a ternary single bulk-heterojunction using either donor:donor:acceptor or donor:acceptor:acceptor with complementary absorption profiles and well-matched energy levels can effectively improve the power conversion efficiency (PCE). Herein, we report the fabrication of binary and ternary OSCs using a wide-band-gap donor molecule C2 in combination with two fullerene-free acceptors (FFAs), i.e., a medium-band-gap DBTBT-IC and a low-band-gap AQx-3. After incorporation of DBTBT-IC in the host C2:AQx-3 binary BHJ active layer, the ternary blend C2:DBTBT-IC:AQx (1.0:0.2:1.0) attains a PCE of 14.49%, which outperforms the respective binary devices, i.e., 10.02% for C2:DBTBT-IC and 10.86% for C2:AQx-3. The higher PCE of the ternary OSC may be related to the simultaneous increase in both the photocurrent (JSC) and the fill factor (FF). The enhancement in the JSC may be associated with the increase in the light-harvesting efficiency of the ternary blend, efficient utilization of the exciton via the energy transfer from DBTBT-IC to AQx-3, and more channels for the charge transfer in the ternary OSC. The higher FF for the ternary devices may be associated with the efficient charge transport and suppression of charge recombination due to appropriate nanoscale phase separation. Thus, the use of a small-molecule donor and two FFAs with complementary absorptions and band gaps may be a good strategy to fabricate efficient ternary OSCs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02277.Experimental section including materials information, device fabrication processes, and characterization; figures showing absorption of blend films, cyclic voltammograms of all molecules in the film state, mobility characteristics, and XRD of pure films; photovoltaic parameters of OSCs based on as-cast binary and ternary active layers (PDF)This article has not yet been cited by other publications.

High‐Efficiency Binary and Ternary Organic Solar Cells Based on Novel Nonfused‐Ring Electron Acceptors

High Efficiency Ternary Organic Solar Cells Via Morphology Regulation with Asymmetric Nonfused Ring Electron Acceptor

Ternary Organic Solar Cells Based on Two Compatible Nonfullerene Acceptors with Power Conversion Efficiency >10.

Ternary Organic Solar Cells with J71 As Donor and Alloyed Acceptors Exhibiting 13.16% Efficiency

18.7% Efficiency Ternary Organic Solar Cells Using Two Non-Fullerene Acceptors with Excellent Compatibility

Ternary Organic Solar Cells with Efficiency >16.5% Based on Two Compatible Nonfullerene Acceptors.

Efficient Ternary Organic Solar Cells with a New Electron Acceptor Based on 3,4-(2,2-Dihexylpropylenedioxy)thiophene

Single‐Junction Organic Solar Cells with 19.17% Efficiency Enabled by Introducing One Asymmetric Guest Acceptor

Efficient Organic Ternary Solar Cells Employing Narrow Band Gap Diketopyrrolopyrrole Polymers and Nonfullerene Acceptors

High-Efficiency Ternary Organic Solar Cells with a Good Figure-of-Merit Enabled by Two Low-Cost Donor Polymers

Ternary Organic Solar Cells Based on Polymer Donor, Polymer Acceptor and PCBM Components

Fullerene-Free All-Small-Molecule Ternary Organic Solar Cells with Two Compatible Fullerene-Free Acceptors and a Coumarin Donor Enabling a Power Conversion Efficiency of 14.5%

High-performance organic solar cells based on polymer donor/small molecule donor/nonfullerene acceptor ternary blends

Combining Fused‐Ring and Unfused‐Core Electron Acceptors Enables Efficient Ternary Organic Solar Cells with Enhanced Fill Factor and Broad Compositional Tolerance

A Well‐Mixed Phase Formed by Two Compatible Non‐Fullerene Acceptors Enables Ternary Organic Solar Cells with Efficiency over 18.6%

A Low‐Cost 3D Spirobifluorene‐Based Acceptor for High‐Performance Ternary Organic Solar Cells

High-Performance Ternary Organic Solar Cells through Incorporation of a Series of A 2 -A 1 -D-A 1 -A 2 Type Nonfullerene Acceptors with Different Terminal Groups

18.9% Efficiency Ternary Organic Solar Cells Enabled by Isomerization Engineering of Chlorine‐Substitution on Small Molecule Donors

Non‐Fully Conjugated Dimerized Giant Acceptors with Different Alkyl‐Linked Sites for Stable and 19.13% Efficiency Organic Solar Cells

Realizing an Unprecedented Fill Factor of 82.2% in Ternary Organic Solar Cells via Co‐Crystallization of Non‐Fullerene Acceptors

Non-Halogenated Polymer Donor-Based Organic Solar Cells with a Nearly 15% Efficiency Enabled by a Classic Ternary Strategy