Abstract:Abstract Today, rare-earth elements are mainly introduced in alloys in the form of misch metal, which is a natural mixture of rare-earth elements (with atomic numbers 57–71). This mixture contains about 50 wt % cerium. The primary components of the mixture are generally cerium, lanthanum, and niobium. The specific composition depends on the particular field from which they were drawn. The variable composition of this mixture may significantly impair its effectiveness in alloying. The ratio of the individual elements in the mixture cannot be determined experimentally for each grade of steel, because of the prohibitive expense of such separation. However, thermodynamic modeling permits determination of the optimal concentration of each rare-earth element and the composition of the misch metal. In the present work, thermodynamic modeling is applied to the interaction of magnesium, aluminum, and lanthanum with oxygen in liquid iron. The thermodynamic model of the reduction of steel by mixtures of such active metals is considered. On the basis of literature data regarding the phase diagrams of the MgO–Al 2 O 3 , MgO–La 2 O 3 , and La 2 O 3 –Al 2 O 3 systems, the coordinates of points of invariant equilibrium in the MgO–La 2 O 3 –Al 2 O 3 system are established. The MgO–La 2 O 3 –Al 2 O 3 phase diagram is plotted. That permits the identification of all possible equilibria in the reduction of steel by magnesium, aluminum, and lanthanum and also the determination of corresponding descriptive equations. The activity of the components in liquid oxide melts is determined by the theory of subregular ionic solutions, taking account of the influence of the oxide melt’s composition on the coordination number of the cations. The activity of the components in metallic melts that are conjugate with the oxide systems is determined by means of the Wagner theory on the basis of first-order reaction parameters. The equilibrium constants of the reduction of steel by the given elements are established by indirect thermodynamic calculations. On the basis of the results, the solubility surface of the components in Fe–Mg–Al–La–O melts is constructed. That permits the identification of regions where the composition of the liquid metal corresponds to a particular oxide phase.

Simulation of metal-oxide melt interaction in view of kinetics of chemical reactions in the interphase boundary

Calculation of the equilibrium composition of metallic and oxide melts during their interaction

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

New approach to evaluating the thermodynamic consistency of melts in the ‘metal-slag’ system based on interatomic interaction parameters

THERMODYNAMICS OF THE PROCESSES OF INTERACTION OF LIQUID METAL COMPONENTS IN Fe – Mg – Al – La – O SYSTEM

MOLECULAR DYNAMIC SIMULATION OF THE MELT OF OXIDE-FLUORIDE INDUSTRIAL SLAG-FORMING MIXTURE

Thermodynamics of the Interactions in Fe–Mg–Al–La–O Melts

Thermodynamic Modeling of Solid Flux Interactions with Molten Aluminum

Molecular–Dynamic Simulation of the Melt of an Industrial Oxide–Fluoride Mold Flux

Thermodynamics and kinetics of the oxidation of amorphous Al-Zr alloys

Modeling of oxidation of structural materials in LBE systems

PHASE-FIELD MODELING OF MOLTEN ZIRCONIUM OXIDATION COUPLED WITH FLOW AND HEAT TRANSPORT

Thermodynamic modelling of liquid slag-matte-metal equilibria applied to the simulation of the Peirce-Smith converter

Simulation of Metal/Oxide Interface Mobility: Effects of Mechanical Stresses on Geometrical Singularities

Formation and growth kinetics of the initial amorphous oxide film on the aluminum melt: A ReaxFF molecular dynamics simulation

Thermodynamic Simulation Calculations of Phase Transformations in Low-Aluminum Zn-Al-Mg Coatings

THERMODYNAMIC MODELING OF PHASE EQUILIBRIA AT STEEL ALLOYED WITH MANGANESE AND CHROME

Thermodynamic Simulation of Metal Reduction from B2O3–CaO–FeO–ZnO Melts by Hydrogen and Carbon Monoxide

Computer-based simulation of kinetics of internal corrosion of engineering alloys at high-temperatures

Refractory–Slag–Metal–Inclusion Multiphase Reactions Modeling Using Computational Thermodynamics: Kinetic Model for Prediction of Inclusion Evolution in Molten Steel

Atomic Dynamics of Multi‐Interfacial Migration and Transformations