Abstract:Two-dimensional layered MXene material with high conductivity and good mechanical flexibility has gained wide attention in the field of energy storage. However, the practical application of MXene was hampered by its limited specific capacity and the unstable structure. Herein, a composite of in-situ grown niobium-doped TiO2 nanosheet arrays on a double transition metal MXene TiNbCTx (TiNbC@NTO) was successfully obtained via a hydrothermal pretreatment followed by in-situ partial oxidation strategy. The prepared TiNbC@NTO combines multiple advantages of both MXene and oxide, including high conductivity derived from the unoxidized MXene TiNbCTx, superior structure stability from the in-situ produced oxide between the MXene layers, which prevents structural collapse and restacking during charging and discharging, and the large layer space which promotes lithium-ion transport. The degree of oxidation of MXene can be adjusted by controlling the reaction temperature, and the oxide nonosheet turn dense with the increase of the temperature. All the oxidized MXenes show improved electrochemical performance compared with the pure TiNbCTx, and the TiNbC@NTO-500 with the appropriate degree of oxidation exhibits the highest reversible capacity, best cycling stability of 261 mAh g-1 after 500 cycles at 1.0 A g-1 among all the as-prepared composites. Furthermore, an extraordinary rate performance (148.5 mAh g-1 at 2 A g-1) was obtained based on the pseudocapacitance dominated mechanism. This work provides a new insight into improving the performance of MXene-based anode material for lithium-ion batteries.

In-situ growth of hybrid NaTi8O13/NaTiO2 nanoribbons on layered MXene Ti3C2 as a competitive anode for high-performance sodium-ion batteries

Building a Stable Plateau-Type Na2Ti3O7 Anode Interface Toward Advanced Sodium-Ion Batteries

In situ growth of NaTiO2 nanotubes on Ti3C2Fx for enhanced sodium ion batteries

Nitrogen-doped carbon decorated TiO2/Ti3C2T MXene composites as anode material for high-performance sodium-ion batteries

In-situ synthesis of niobium-doped TiO2 nanosheet arrays on double transition metal MXene (TiNbCTx) as stable anode material for lithium-ion batteries

Ti3C2 MXene-Derived Sodium/Potassium Titanate Nanoribbons for High-Performance Sodium/Potassium Ion Batteries with Enhanced Capacities.

Ultrafine MoO2-Carbon Microstructures Enable Ultralong-Life Power-Type Sodium Ion Storage by Enhanced Pseudocapacitance

Alkalized Ti3C2 MXene Nanoribbons with Expanded Interlayer Spacing for High-Capacity Sodium and Potassium Ion Batteries

Few-layered Ti<sub>3</sub>C<sub>2</sub> MXene anchoring bimetallic selenide NiCo<sub>2</sub>Se<sub>4</sub> nanoparticles for superior Sodium-ion batteries

Sandwich-like Na0.23TiO2 nanobelt/Ti3C2 MXene composites from a scalable in situ transformation reaction for long-life high-rate lithium/sodium-ion batteries

Few-layered Ti3C2 MXene anchoring bimetallic selenide NiCo2Se4 nanoparticles for superior Sodium-ion batteries

Multidimensional Synergistic Architecture of Ti3C2 MXene/CoS2@N-doped Carbon for Sodium-Ion Batteries with Ultralong Cycle Lifespan

In-situ Conversion Growth of Carbon-Coated MoS2/N-doped Carbon Nanotubes As Anodes with Superior Capacity Retention for Sodium-Ion Batteries

Confining homogeneous Ni0.5Co0.5Se2 nanoparticles in Ti3C2T MXene architectures for enhanced sodium storage performance

Superior Sodium Storage in Na2ti3o7 Nanotube Arrays Through Surface Engineering

Carbon Coated Sodium-Titanate Nanotube As an Advanced Intercalation Anode Material for Sodium-Ion Batteries

Confining Homogeneous Ni0.5Co0.5Se2 Nanoparticles in Ti3C2Tx MXene Architectures for Enhanced Sodium Storage Performance

Heterostructure engineering of MnO/TiO 2 embedded in N-doped hollow carbon nanofibers for superior sodium storage

Ultrathin cobalt nickel selenides (Co0.5Ni0.5Se2) nanosheet arrays anchoring on Ti3C2 MXene for high-performance Na+/K+ batteries

Stable Electrochemical Properties of Titanium Doped LayeredP2-Type Na0.67Ni0.15 Mn0.85O2 Cathode Material for Sodium IonBatteriesH

Insights into the storage mechanism of novel mesoporous hollow TiO2-x/C nanofibers as a high-performance anode material for sodium-ion batteries