Abstract:Electrocardiography (ECG) is a primary tool for diagnosis of various types of disease and disorders such as arrhythmias, coronary heart disease, heart attack, mental disorders, etc. Reliable wearable ECG devices can be a valuable tool in early diagnosis and effective treatment of such disease and disorders. Convention wearable ECG sensor-systems are rigid, bulky, expensive, and the recorded ECG signals using these wearable devices lack required accuracy for medical diagnosis mainly due to motion artifacts that is originated from slippage of sensors on skin and/or instable interface between the soft sensor and the rigid electronic circuits. Here, we report a low-modulus, soft and stretchable wearable electrocardiography (ECG) sensor-system patch which enables continuous and long-term recording of ECG signals with minimal motion artifacts. This system consists of two reusable, detachable-attachable patches: sensor patch and circuit patch, as shown in Figure 1a. The reusable multi-wall carbon nanotube (MWCNT) based sensor patch is fabricated on stretchable elastomer substrate by our developed cost and time-effective method. Reusable, front-end and wireless circuit patch is made by integration of the off-the-shelf integrated circuit components with three-dimensional (3D) stretchable-deformable interconnects (SDI). SDIs are 3D springs of liquid metal (EGaIn). Unlike other reported liquid metal based interconnects, SDI has been designed in 3D form to increase the stretchability and make it low-modulus and robust to deformations in all directions. The stretchability of SDI structure is beyond 500% (the limit of our measurement system) without any negligible change in electrical resistivity of the interconnects. With less than 1% change in the resistance of SDIs after 50,000 cycles of applied tensile strain of 200%, the SDI structure ensures reliable stretchability and durability of the circuit patch for long-term electrocardiography. The sensor patch is soft, stretchable and it is fabricated using a low-cost scalable method. This soft and stretchable ECG sensor-system shows comparable performance with respect to medical grade Ag/AgCl wet gel electrodes. Our CNT-PDMS sensors shows low electrode-skin interface impedance and low susceptibility to motion artifact which similar of it in medical grade Ag/AgCl wet gel sensors (Fig. 1b). Further, it is waterproof, reusable and comfortable to wear. The circuit patch includes a rechargeable battery and ECG signals is wirelessly sent to a personal device such as cellphone, tablet and laptop through Bluetooth low energy (BLE) and it is displayed in real-time (Fig. 1c) Our developed sensor-system is a multi-use platform which can be applied for the detection of EMG, EEG or EOG signals. Figure 1

A Breathable and Strain‐Insensitive Multi‐Layered E‐Skin Patch for Digital Healthcare Wearables

Battery‐Free and Wireless Epidermal Electrochemical System with All‐Printed Stretchable Electrode Array for Multiplexed in Situ Sweat Analysis

A Breathable, Stretchable, and Self‐Calibrated Multimodal Electronic Skin Based on Hydrogel Microstructures for Wireless Wearables

A Stretchable, Breathable, And Self‐Adhesive Electronic Skin with Multimodal Sensing Capabilities for Human‐Centered Healthcare

On-skin ultrathin and stretchable multifunctional sensor for smart healthcare wearables

Fully Elastomeric Fingerprint-Shaped Electronic Skin Based on Tunable Patterned Graphene/Silver Nanocomposites

Fully Elastomeric Fingerprint-Shaped Electronic Skin Based on Tunable Patterned Graphene/Silver Nanocomposites.

An All‐Nanofiber‐Based, Breathable, Ultralight Electronic Skin for Monitoring Physiological Signals

(Digital Presentation) A Low-Modulus, Soft and Stretchable Wearable Electrocardiography Sensor-System Patch

An Elastic and Damage-Tolerant Dry Epidermal Patch with Robust Skin Adhesion for Bioelectronic Interfacing

Microfluidic-Integrated Multimodal Wearable Hybrid Patch for Wireless and Continuous Physiological Monitoring

Biomimetic breathable nanofiber electronic skins with temperature-controlled self-adhesive and directional moisture-wicking properties for bifunctional pressure and non-contact sensing

Stretchable electronic skin patch with strain isolation for the simultaneous measurements of surface electromyography and temperature

Multifunctional, breathable MXene-PU mesh electronic skin for wearable intelligent 12-lead ECG monitoring system

Skin-Inspired High-Performance Active-matrix Circuitry for Multimodal User-Interaction

Gas-permeable and stretchable on-skin electronics based on a gradient porous elastomer and self-assembled silver nanowires

A Nanoporous Carbon‐MXene Heterostructured Nanocomposite‐Based Epidermal Patch for Real‐Time Biopotentials and Sweat Glucose Monitoring

Multimodal integrated flexible electronic skin for physiological perception and contactless kinematics pattern recognition

Multifunctional Electronic Skin With a Stack of Temperature and Pressure Sensor Arrays

Techniques and Materials for High‐Throughput Fabrication and Integration of Multiparameter Flexible Skin Patches

Multimodal health monitoring via a hierarchical and ultrastretchable all-in-one electronic textile