Evaluation of extra‐corporeal membrane oxygenator cannulae in pulsatile and non‐pulsatile pediatric mock circuits

Lorenzo Ferrari,Maris Bartkevics,Hansjörg Jenni,Alexander Kadner,Matthias Siepe,Dominik Obrist
DOI: https://doi.org/10.1111/aor.14897
2024-10-28
Artificial Organs
Abstract:This study aims to evaluate ECMO cannulae in pulsatile and non‐pulsatile pediatric mock circuits. Under non‐pulsatile conditions, the system was characterized by overall higher pressures, resulting in lower support to the patient and higher total hemodynamic energy. Pressure gradients and M number were not affected by the testing conditions. Background This study evaluated the hemodynamic performance of arterial and venous cannulae in a compliant pediatric extracorporeal membrane oxygenation (ECMO) mock circuit in pulsatile and non‐pulsatile flow conditions. Methods The ECMO setup consisted of an oxygenator, diagonal pump, and standardized‐length arterial/venous tubing with pressure transducers. A validated left‐heart mock loop was adapted to simulate pediatric conditions. The pulsatile flow was driven by a computer‐controlled piston pump set at 120 bpm. A roller pump was used for non‐pulsatile conditions. The circuit was primed with 40% glycerol‐based solution. The cardiac output was set to 1 L/min and the aortic pressure to 40–50 mmHg. Four arterial cannulae (8Fr, 10Fr, 12Fr, 14Fr) and five venous cannulae (12Fr, 14Fr, 16Fr, 18Fr, 20Fr) (Medtronic, Inc., Minneapolis, MN, USA) were tested at increasing flow rate in 12 combinations. Results The pulsatile condition required lower ECMO pump speeds for all cannulae combinations at a given flow rate, inducing a significantly smaller increase of flow in the mock loop. Under non‐pulsatile conditions, the aortic and arterial pressures in the cannulae were higher (p
engineering, biomedical,transplantation
What problem does this paper attempt to address?