Abstract:Solid‐state lithium metal batteries encounter challenges including dendrite penetration, electrode–electrolyte delamination, and void/crack formation. Here, by deploying a novel composite electrolyte system comprising nonconstrained ceramics within dynamic polymers, self‐healing capability, flowability, and solid properties are successfully integrated into one material. Utilizing this electrolyte, the Li0‐NMC811 full cell demonstrates stable operation at high current density (5 mA cm−2) for 1100 cycles. Lithium metal (Li0) solid‐state batteries encounter implementation challenges due to dendrite formation, side reactions, and movement of the electrode–electrolyte interface in cycling. Notably, voids and cracks formed during battery fabrication/operation are hot spots for failure. Here, a self‐healing, flowable yet solid electrolyte composed of mobile ceramic crystals embedded in a reconfigurable polymer network is reported. This electrolyte can auto‐repair voids and cracks through a two‐step self‐healing process that occurs at a fast rate of 5.6 μm h−1. A dynamical phase diagram is generated, showing the material can switch between liquid and solid forms in response to external strain rates. The flowability of the electrolyte allows it to accommodate the electrode volume change during Li0 stripping. Simultaneously, the electrolyte maintains a solid form with high tensile strength (0.28 MPa), facilitating the regulation of mossy Li0 deposition. The chemistries and kinetics are studied by operando synchrotron X‐ray and in situ transmission electron microscopy (TEM). Solid‐state NMR reveals a dual‐phase ion conduction pathway and rapid Li+ diffusion through the stable polymer‐ceramic interphase. This designed electrolyte exhibits extended cycling life in Li0–Li0 cells, reaching 12 000 h at 0.2 mA cm−2 and 5000 h at 0.5 mA cm−2. Furthermore, owing to its high critical current density of 9 mA cm−2, the Li0–LiNi0.8Mn0.1Co0.1O2 (NMC811) full cell demonstrates stable cycling at 5 mA cm−2 for 1100 cycles, retaining 88% of its capacity, even under near‐zero stack pressure conditions.

A Highly Durable Rubber‐Derived Lithium‐Conducting Elastomer for Lithium Metal Batteries

Elastomeric Electrolyte for High Capacity and Long‐Cycle‐Life Solid‐State Lithium Metal Battery

Elastomeric electrolytes for high-energy solid-state lithium batteries

A Dual‐Bond Crosslinking Strategy Enabling Resilient and Recyclable Electrolyte Elastomers for Solid‐State Lithium Metal Batteries

A self-healing Li-crosslinked elastomer promotes a highly robust and conductive solid–electrolyte interphase

A highly elastic polysiloxane-based polymer electrolyte for all-solid-state lithium metal batteries

Metal‐Organic Framework‐Derived Elastic Solid Polymer Electrolytes Enabled by Covalent Crosslinking for High‐Performance Lithium Metal Batteries

An Elastomeric Lithium‐Conducting Interlayer for High‐Performance LATP‐Based Lithium Metal Batteries

Rubbery solid electrolytes with dominant cationic transport and high ambient conductivity

In Situ Construction of Elastic Solid-State Polymer Electrolyte with Fast Ionic Transport for Dendrite-Free Solid-State Lithium Metal Batteries

In Situ Constructing Robust and Highly Conductive Solid Electrolyte with Tailored Interfacial Chemistry for Durable Li Metal Batteries

Versatile Inorganic/Polymer Composite Electrolyte Added with 2-Methylsuccinic Anhydride via a Solvent-Free Preparation Method for High-Performance All-Solid-State Li-Metal Batteries: High Voltage, Long Cycle Life, and Room-Temperature Operation

Dual‐Phase Elastomeric Electrolyte with a Latitude‐Longitude Interwoven Structure for High‐Energy Solid‐State Lithium Metal Batteries

Solid-State Rigid Polymer Composite Electrolytes with In-Situ Formed Nano-Crystalline Lithium Ion Pathways for Lithium-Metal Batteries.

Polyvinylidene fluoride nanofibers with embedded Li6.4La3Zr1.4Ta0.6O12 fillers modified polymer electrolytes for high-capacity and long-life all-solid-state lithium metal batteries

A Locally Solvent-Tethered Polymer Electrolyte for Long-Life Lithium Metal Batteries

A Robust, Highly Stretchable Ion-Conducive Skin for Stable Lithium Metal Batteries

A Stretchable and Safe Polymer Electrolyte with a Protecting-Layer Strategy for Solid-State Lithium Metal Batteries

A Self‐Healing, Flowable, Yet Solid Electrolyte Suppresses Li‐Metal Morphological Instabilities

Highly elastic and mechanically robust polymer electrolytes with high ionic conductivity and adhesiveness for high-performance lithium metal batteries

Rational design of ultrathin composite solid-state electrolyte for high-performance lithium metal batteries