Fabrication and mechanism analysis of wavy fins using a novel machining method

Baoyu Zhang,Peixuan Zhong,Xueqin Pang,Pengyu Shen,Wenjun Deng

DOI: https://doi.org/10.1016/j.jmapro.2023.02.046

IF: 5.684

2023-03-03

Journal of Manufacturing Processes

Abstract:This research proposed a novel plowing extrusion-cutting (PE-C) method for efficiently fabricating 3D functional fins with novel wavy-shaped structures, which could be applied for electronics cooling, chemical reaction, and other energy applications. PE-C sequentially involved three critical stages: preheating, plowing extrusion (PE), and cutting. During PE, the preheated metal was adequately shaped into grooved structures. The cutting stage was the core procedure for the whole PE-C, in which grooved structures were multi-folded into arrays of wavy fins. Comprehensive experiments were conducted to investigate the forming performance of PE-C. Subsequently, an in-depth comparative analysis was performed to clarify their forming mechanism and geometric model. Results show that the tool rake angle γ c , cutting velocity V c , and relative cutting thickness t pd were critical parameters to control wavy fins' geometry (shape and size). Small γ c , V c , and t pd contributed to fabricating wavy fins with large amplitude A s , while the period width P w of wavy fins remained basically stable under variable parameters. During the cutting stage, the forming process of the fin top and its bottom had a velocity difference due to the different stacking deformation. Accordingly, the established geometric model showed good agreement with the experimental results. In addition, PE-C could be applied in conventional rough-cutting procedures to reduce waste chips. Therefore, PE-C was a feasible and efficient process for direct fabricating geometrically advanced fins instead of waste chips during machining, exhibiting great potential in fabricating 3D fins and recycling chips.

engineering, manufacturing