Abstract:The effect of both the Fe : Ni ratio (5 to 1 : 1) and the relative Lewis acidity of a metal oxide support on catalytic activity, selectivity and stability was investigated in the CO2 mediated oxidative dehydrogenation of ethane (CO2-ODH). To avoid effects of varying pore sizes, shapes and volumes of the supports, chromia and zirconia overlayers were coated onto a common γ-Al2O3 carrier (CrOx@Al2O3 and ZrOx@Al2O3). Separately, oxidic FexNiy alloy precursor nanoparticles were prepared using a nonaqueous surfactant-free method and deposited by sonication onto the carrier. In comparison to previous studies in the field, this synthesis technique yields closely associated iron and nickel increasing the chances for alloy formation. During reduction, a mixture of a bcc and a fcc alloy phase was formed, with the content of bcc increasing with increasing iron content as predicted by the bulk phase diagram. Upon exposure to carbon dioxide at elevated temperatures, the bcc metallic phase is selectively oxidised to an inverse spinel structure via the dissociation of CO2. When exposed to CO2-ODH conditions, the bare ZrOx@Al2O3 support shows no activity. The presence of FeNi phases increases the conversion of ethane and CO2 marginally (<2%) but forms ethylene at high selectivity (SC2H4 > 80%). The CrOx@Al2O3 support shows some initial activity (XC2H6 < 5%) at very high ethylene selectivity (SC2H4 > 90%) but deactivates with time on stream. Comparison of the ethane and carbon dioxide conversions suggests that direct dehydrogenation rather than the oxidative pathway is taking place. When FeNi particles with the highest Fe content are added, the ethane conversion behavior hardly changes, but the CO2 conversion is increased now supporting the stoichiometric CO2-ODH reaction (SC2H4 > 95%). It is therefore evident that a tandem catalyst system between a reducible oxide carrier and the FeNi species is required. Increasing the Ni content results in an increase in activity and stability while changing the dominant reaction pathway to a combination of dry reforming, CO2-ODH and possibly the reverse Boudouard reaction, with the latter countering catalyst deactivation through carbon deposition.

Photocatalytic Oxidative Coupling of Ethane to n‐Butane Using CO2 as a Soft Oxidant over NiTi‐Layered Double Hydroxide

Direct Conversion of CO and H2O to Hydrocarbons at Atmospheric Pressure Using a TiO2−x/Ni Photothermal Catalyst

Atomically Dispersed Nickel Anchored on a Nitrogen‐Doped Carbon/TiO2 Composite for Efficient and Selective Photocatalytic CH4 Oxidation to Oxygenates

Atomically Dispersed Nickel Anchored on a Nitrogen‐Doped Carbon/TiO2Composite for Efficient and Selective Photocatalytic CH4Oxidation to Oxygenates

Photothermal methane coupling into liquid fuels with hydrogen evolution over nanocatalysts based on layered double hydroxide (LDH)

Photocatalytic Ethane Conversion on Rutile TiO 2 (110): Identifying the Role of Ethyl Radical

Oxidative Dehydrogenation and Dry Reforming of N-Butane with CO2 over NiFe Bimetallic Catalysts

Tuning the Selectivity of Photothermal CO2 Hydrogenation Through Photo-Induced Interaction Between Ni Nanoparticles and TiO2

Unraveling the C–C coupling mechanism on Ni–O–Fe asymmetric sites for photocatalytic nonoxidative coupling of methane

Dual Ni active sites mediated by In to separate ethane activation and oxidation for enhanced ethene production via chemical looping scheme

Photocatalytic ethene synthesis from ethane dehydrogenation with high selectivity by ZnO-supported Pt nanoparticles

Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single Atom Sites on Carbon Nitride for Selective Photooxidation of Methane into Methanol

Boosting CO Hydrogenation Towards C 2+ Hydrocarbons over Interfacial TiO 2− X /ni Catalysts

High-performance Photocatalytic Nonoxidative Conversion of Methane to Ethane and Hydrogen by Heteroatoms-Engineered TiO2

Integrating Au@TiOx and Co sites in a tandem photocatalyst for efficient C-C coupling synthesis of ethane

Highly Selective Conversion of CH4 to High Value‐Added C1 Oxygenates over Pd Loaded ZnTi‐LDH

An Efficient Intercalation Supramolecular Structure for Photocatalytic CO2 Reduction to Ethylene Under Visible Light

Boosting CO hydrogenation towards C2+ hydrocarbons over interfacial TiO2−x/Ni catalysts

Metaln+-Metalδ+ pair sites steer C-C coupling for selective CO2 photoreduction to C2 hydrocarbons

Highly Efficient and Selective Photocatalytic Nonoxidative Coupling of Methane to Ethylene over Pd-Zn Synergistic Catalytic Sites

Supported FexNiy catalysts for the co-activation of CO2 and small alkanes