Experimental study on adsorption cooling performance of copper foams curing MIL-101/isobutane double bed system

Junpeng Shao,Yu Yin,Qiqi Shen,Lin Zhang,Qun Cui,Haiyan Wang
DOI: https://doi.org/10.1016/j.ijrefrig.2021.04.018
IF: 4.14
2021-11-01
International Journal of Refrigeration
Abstract:<p>In this paper, copper foams cured MIL-101(CFCM)/isobutane double-bed adsorption cooling system (ACS) were designed and constructed by using the CFCM unit tube adsorbers. Adsorption cooling characteristic curves of CFCM/isobutane double-bed ACS were studied. Influence of cycle parameters and mass recovery process on the cooling capacity, specific cooling power (SCP) and coefficient of performance (COP) of the CFCM/isobutane double-bed ACS was investigated. Results show that under the conditions of cycle time of 600 s, pre-cooling/pre-heating time of 120 s, condensation temperature of 15°C and hot water temperature of 85°C with the flow rate of 20 L h<sup>−1</sup>, and cooling water temperature of 14-16°C with the flow rate of 50 L h<sup>−1</sup>, the cooling capacity, SCP and COP of CFCM/isobutane double-bed ACS is 65.20 kJ kg<sup>−1</sup>, 108.67 W kg<sup>−1</sup> and 0.2260, respectively. Compared with basic cycle, the cooling capacity, SCP and COP of CFCM/isobutane double-bed ACS increases by about 26%, 24% and 22% under mass recovery time of 10 s. The cooling performance of CFCM/isobutane double-bed ACS remains stable after 100 sets consecutive basic cycles and 20 sets mass recovery cycles.</p>
engineering, mechanical,thermodynamics
What problem does this paper attempt to address?