Chemical looping pyrolysis-gasification staged conversion of microalgae biomass with Ca-Fe composite oxygen carrier

Xiangyu Gao,Xiao He,Yongzhuo Liu,Xintao Zhang,Xiude Hu,Qingjie Guo
DOI: https://doi.org/10.1016/j.ijggc.2023.103941
IF: 4.4
2023-07-13
International Journal of Greenhouse Gas Control
Abstract:Chemical looping pyrolysis-gasification staged conversion (CL-PGSC) of biomass was proposed in this work, which involves the separation of chemical looping gasification into two stages: biomass pyrolysis stage and bio-char gasification stage at different temperature. Pyrolysis and gasification behavior of Nannochloropsis sp., a microalga, with Ca-Fe composite oxygen carrier was investigated in a tubular reactor at varying temperatures and Ca-Fe molar ratios. The results indicate that all Ca-Fe composite oxygen carriers are capable of catalytically upgrading the quality of bio-oils in-situ during the pyrolysis stage. The complex metal oxides calcium ferrites facilitate the formation of aromatics and ketones, while both Fe 2 O 3 and CaO components promote the production of alcohols. As for oxygen carrier with Ca-Fe molar ratio 1:1, the total peak area percentage of hydrocarbons and ketones reaches 66.5 area% within bio-oils, with 28.7 area% being toluene and 18.8 area% being 2-heptadecanone. Moreover, at the gasification stage, clean CO-rich or H 2 -rich syngas were generated from bio-chars produced at various pyrolysis temperatures with or without steam as a gasifying agent. In the proposed CL-PGSC process, Ca-Fe composite oxygen carrier serves as a catalysis for in-situ upgrading pyrolytic bio-oils, then as an oxygen donor for the gasification of pyrolytic char to achieve the simultaneous production of valuable pyrolytic bio-oils and clean syngas free from tar contamination. This provides a promising strategy for the full utilization of biomass.
energy & fuels,engineering, chemical, environmental,green & sustainable science & technology
What problem does this paper attempt to address?