Abstract:This paper proposes a method for identifying distribution network line parameters considering multisource measurement. Firstly, the initial values of conductivity and susceptance are obtained through linear regression and converted into resistance and reactance, respectively. Then, based on the series parallel connection of the network end branches, a non‐linear function about resistance reactance is derived. By combining the measurement data of micro phasor measurement unit and advanced metering infrastructure at multiple times, the non‐linear measurement equation of the line is established, and the Levenberg–Marquardt algorithm is used to solve the non‐linear function, thus achieving the identification of distribution line parameters. The uncertainty brought by the integration of distributed generations in distribution networks poses a higher demand for situation awareness in the distribution network. Accurate identification of distribution network line parameters is of great significance for the operation and control of the distribution network. This paper proposes a method for identifying distribution network line parameters considering multisource measurement. Firstly, the initial values of conductivity and susceptance are obtained through linear regression and converted into resistance and reactance, respectively. Then, based on the series parallel connection of the network end branches, a non‐linear function about resistance reactance is derived. By combining the measurement data of micro phasor measurement unit and advanced metering infrastructure at multiple times, the non‐linear measurement equation of the line is established, and the Levenberg–Marquardt algorithm is used to solve the non‐linear function, thus achieving the identification of distribution line parameters. The case study demonstrates the accuracy and effectiveness of the proposed method.

Distribution Network Admittance Matrix Estimation With Linear Regression

Tractable Identification of Electric Distribution Networks

Topology Identification and Line Parameter Estimation for Non-PMU Distribution Network: A Numerical Method.

Quadratic Constrained Quadratic Estimation for Distribution Network with Limited Measurements

On Identification of Distribution Grids

A Data-Driven Topology and Parameter Joint Estimation Method in non-PMU Distribution Networks

Topology Identification of Active Low-Voltage Distribution Network Based on Regression Analysis and Knowledge Reasoning

Estimation of Complex Valued Laplacian Matrices for Topology Identification in Power Systems

Estimation of Complex-Valued Laplacian Matrices for Topology Identification in Power Systems

Hybrid data-driven method for distribution network topology and line parameters joint estimation under small data sets

Linear three-phase power flow for unbalanced active distribution networks with PV nodes

Identification of Distribution Network Topology and Line Parameter Based on Smart Meter Measurements

Robust Data-driven Linearization for Distribution Three-phase Power Flow

Admittance Extraction of Loaded Grid Power Distribution Network with Arbitrary Shapes

Partial Correlation Analysis Based Identification of Distribution Network Topology

PaToPa: A Data-Driven Parameter and Topology Joint Estimation Framework in Distribution Grids

Combined Unbalanced Distribution System State and Line Impedance Matrix Estimation

Urban MV and LV Distribution Grid Topology Estimation via Group Lasso

Data-Driven Power Flow Calculation Method: A Lifting Dimension Linear Regression Approach

A Levenberg–Marquardt algorithm‐based line parameters identification method for distribution network considering multisource measurement

Demonstrating Almost Linear Time Complexity of Bus Admittance Matrix-Based Distribution Network Power Flow: An Empirical Approach