Improving radiofrequency power and specific absorption rate management with bumped transmit elements in ultra‐high field MRI
Alireza Sadeghi‐Tarakameh,Gregor Adriany,Gregory J. Metzger,Russell L. Lagore,Steve Jungst,Lance DelaBarre,Pierre‐Francois Van de Moortele,Kamil Ugurbil,Ergin Atalar,Yigitcan Eryaman
DOI: https://doi.org/10.1002/mrm.28382
2020-06-23
Magnetic Resonance in Medicine
Abstract:<section class="article-section__content"><h3 class="article-section__sub-title section1"> Purpose</h3><p>In this study, we investigate a strategy to reduce the local specific absorption rate (SAR) while keeping constant inside the region of interest (ROI) at the ultra‐high field (B<sub>0</sub> ≥ 7T) MRI. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Methods</h3><p>Locally raising the resonance structure under the discontinuity (i.e., creating a bump) increases the distance between the accumulated charges and the tissue. As a result, it reduces the electric field and local SAR generated by these charges inside the tissue. The at a point that is sufficiently far from the coil, however, is not affected by this modification. In this study, three different resonant elements (i.e., loop coil, snake antenna, and fractionated dipole [FD]) are investigated. For experimental validation, a bumped FD is further investigated at 10.5T. After the validation, the transmit performances of eight‐channel arrays of each element are compared through electromagnetic (EM) simulations. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Results</h3><p>Introducing a bump reduced the peak 10g‐averaged SAR by 21, 26, 23% for the loop and snake antenna at 7T, and FD at 10.5T, respectively. In addition, eight‐channel bumped FD array at 10.5T had a 27% lower peak 10g‐averaged SAR in a realistic human body simulation (i.e., prostate imaging) compared to an eight‐channel FD array.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Conclusion</h3><p>In this study, we investigated a simple design strategy based on adding bumps to a resonant element to reduce the local SAR while maintaining inside an ROI. As an example, we modified an FD and performed EM simulations and phantom experiments with a 10.5T scanner. Results show that the peak 10g‐averaged SAR can be reduced more than 25%. </p></section>
radiology, nuclear medicine & medical imaging