Abstract:Electroplating sludge is a hazardous waste and secondary metal resource because of its heavy metal content, which poses a huge threat to environmental safety if not properly disposed. An innovative process of oxidizing roasting followed by water leaching and smelting reduction to recover Cr, Cu, and Ni from electroplating sludge was proposed in this research, in which other two hazardous wastes of spent cathode carbon combustion dust and copper refining slag were co-treated. The NaF from spent cathode carbon combustion dust could convert Cr2O3 to Na2CrO4 using the oxidizing roasting process, resulting in a Cr recovery through the subsequent water leaching. The Na2CrO4 formation was promoted by CaO owing to it transferring the Cr spinel phase of FeCr2O4 [1+] to CaCrO4 and then to Na2CrO4. Under optimal conditions, the Cr recovery reached 97.1 %, and most ‘F’ was solidified into CaF2. In the next smelting reduction of the leaching residue, the Cu and Ni were recovered mainly in the form of Cu-Ni alloy. The addition of copper refining slag promoted their recovery, due to it modifying the molten slag and alloy structures and increasing the Cu-Ni alloy separation from molten slag. Some generated high-melting-point Cu-Ni-Fe and Ni-Fe alloys were converted to a Cu-Ni alloy with a low melting point in presence of Co from the copper refining slag, simultaneously with which the Fe was transferred out from Cu-Ni-Fe and Ni-Fe alloys and combined with Co to form a Fe-Co alloy. It increased Cu-Ni alloy droplets aggregation from molten slag and decreased their contents in the residual slag. Under optimized conditions, the Cu and Ni contents in the residual slag decreased to 0.37 and 0.06 wt%, respectively. Besides, the residual slag mainly composed of CaO, CaF2 and SiO2 could be used to prepare building materials rendering it harmless.

CO2-assisted ‘Weathering’ of Steel Slag-Derived Calcium Silicate Hydrate: A Generalized Strategy for Recycling Noble Metals and Constructing SiO2-Based Nanocomposites

Hierarchically Structured Calcium Silicate Hydrate-Based Nanocomposites Derived from Steel Slag for Highly Efficient Heavy Metal Removal from Wastewater

Eco-utilization of steel slag: Preparation of Fe-based calcium silicate hydrate and its application in As(V) removal

Beneficial Reuse of Stainless Steel Slag and Its Heavy Metals Pollution Risk

An All-in-one Strategy for the Adsorption of Heavy Metal Ions and Photodegradation of Organic Pollutants Using Steel Slag-Derived Calcium Silicate Hydrate

Grave-to-cradle Upcycling of Ni from Electroplating Wastewater to Photothermal CO2 Catalysis

Synthesis of Highly Efficient CaO-Based, Self-Stabilizing CO2 Sorbents via Structure-Reforming of Steel Slag.

Upcycling of heavy metal adsorbents into sulfide semiconductors for photocatalytic CO2 reduction

Recycling heavy metal ions by ultrathin nanosheet-assembled calcium silicate hydrate for the degradation of organic pollutants in wastewater via Fenton-like reactions

Treating waste with waste: Metals recovery from electroplating sludge using spent cathode carbon combustion dust and copper refining slag

Reconstruction of Metal Ions Extracted from Coal Gangue to Synthesize Cost-effective Adsorbent for Highly Efficient Removal of Pollutants

Recycling of iron and silicon from drinking water treatment sludge for synthesis of magnetic iron oxide@SiO2 composites

CO2 Sequestration and CaCO3 Recovery with Steel Slag by a Novel Two-Step Leaching and Carbonation Method

Recycling Spent Water Treatment Adsorbents for Efficient Electrocatalytic Water Oxidation Reaction

Recycling heavy metals from wastewater for photocatalytic CO2 reduction

Novel method for comprehensive utilization of MSWI fly ash through co-reduction with red mud to prepare crude alloy and cleaned slag

Facile Upcycling of Hazardous Cr-Containing Electroplating Sludge into Value-Added Metal-Organic Frameworks for Efficient Adsorptive Desulfurization

Recycling alloy scrap and CO2 by paired molten salt electrolysis

Occurrence of steel converter slag and its high value-added conversion for environmental restoration in China: A review

High-Value Resource Utilization of Steel Waste to Prepare Uniform Micronano LiFePO 4 /C Cathode Material

Synchronous extraction of Pt, Zr and Ce from spent catalysts via SoG-Si scraps melting collection by regulating Si reduction based on a new fluorine-containing slag