Abstract:The state-of-the-art solar-thermal evaporators demonstrating high energy utilization efficiency, a high evaporation rate, and salt rejection are highly desirable in solar-driven low-energy water purification/harvesting. Herein, a novel Janus solar evaporator is constructed by loading polypyrrole (PPy) nanobelts on the polyvinyl alcohol (PVA) hydrogel. The PPy nanobelts present a high solar absorption of 98.3%, leading to a localized solar-thermal efficiency of 82.5% when insulated from bulk water by the PVA hydrogel. The porous PVA hydrogel and the hydrophilic PPy nanobelts enable the efficient three-dimensional water transport. Taking advantages of the synergistic effect in the water-energy nexus, the Janus PPy hydrogel evaporator evaporates water with a high rate of 2.26 kg m–2 h–1 via 80.1% solar energy from 1 sun irradiance with a low PPy loading of ∼3 mg cm–2 even at a rate of 2.64 kg m–2 h–1 via 96.3% solar energy for a biomimetic conical evaporator. The Janus evaporator presents superior salt-resistant desalination and contaminant purification performance in seawater and sewage. Furthermore, a portable solar-thermal purifier equipped with the Janus evaporator desalts real seawater far above the drinking water standard with over a 99.9% salt rejection rate and eliminates 95.8% of chemical oxygen demand in real sewage, highlighting its potential for advanced clean water harvesting.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13584.Instruments and characterization; desalination and purification tests; instruments; calculations of total solar absorption of PPy nanobelts; calculations of vaporization enthalpy and energy efficiency; digital images of the bulk FeOCl crystal and superfine FeOCl powder; digital images of PPy dispersions in DMSO; XRD pattern of PPy nanobelts; FTIR spectra of PPy nanobelts, PVA and the PPy-PVA compound; temperature curve of the PPy nanobelts under 1 sun irradiation over time; calculations of solar-thermal conversion efficiency; mechanical strength of the PVA hydrogel; π–π interactions of PPy nanobelts; water contact angle of the PPy nanobelt film; UV–vis–NIR reflectance spectra of the upper surface of both flat and conical evaporators; evaporation rate of the conical Janus-type PPy hydrogel evaporator under 1, 2, and 5 sun irradiation; mass loss of simulated average seawater for the conical Janus evaporator with a PPy nanobelt loading content of 3 mg cm–2 compared with the bare pure water as the blank control experiment under 1 sun; corresponding fitted calibration curve of UV–vis absorbance versus gentian violet concentration at 588 nm; water transport rate of the PVA hydrogel; and calculations of COD (PDF)Washing test (MP4)This article has not yet been cited by other publications.

Polymeric solid wastes for efficient and stable solar desalination and the outdoor clean water production performance prediction

A Scalable Prototype by in Situ Polymerization of Biodegradables, Cross-Linked Molecular Mode of Vapor Transport, and Metal Ion Rejection for Solar-Driven Seawater Desalination

Intensifying Solar Interfacial Heat Accumulation for Clean Water Generation Excluding Heavy Metal Ions and Oil Emulsions

Highly Efficient and Cost-Effective Water Desalination via the Hybrid Hydrogel-Based Solar-Driven Interfacial Evaporation

Cost-Effective and Scalable Solar Interface Evaporators Derived from Industry Waste for Efficient Solar Steam Generation

In situ polymerization of three-dimensional polypyrrole aerogel for efficient solar-driven interfacial evaporation and desalination

Highly Efficient Solar-Driven Interface Water Evaporation Achieved on Polypyrrole@Single-Sided Flannel

Fully waste-based solar evaporator in interfacial solar-driven seawater desalination

Solar-driven water evaporation using a collaborative photothermal conversion material system based on carbonized waste polyphenylene sulfide and copper sulfide

Janus Polypyrrole Nanobelt@Polyvinyl Alcohol Hydrogel Evaporator for Robust Solar-Thermal Seawater Desalination and Sewage Purification

Interfacial Photothermal Heat Accumulation for Simultaneous Salt Rejection and Freshwater Generation; an Efficient Solar Energy Harvester

A Bilayered Wood-Poly(3,4-ethylenedioxythiophene):Polystyrene Sulfonate Hydrogel Interfacial Evaporator for Sustainable Solar-Driven Sewage Purification and Desalination

An array structure of polydopamine/wood solar interfacial evaporator for high-efficiency water generation and desalination

Highly Salt-Resistant interfacial solar evaporators based on Melamine@Silicone nanoparticles for stable Long-Term desalination and water harvesting

Assembled Wood-Polyester Fabric-Hydrogel Janus Evaporator for Sustainable Seawater Desalination

Synergistic dual-mechanism raised structure and vertically aligned porous 3D hydrogel fabric for ultra-high salt-resistant water desalination

A self-floating integrated hydrogel evaporator with efficient salt resistance and thermal localization for efficient solar water desalination

Recyclable Polydopamine-Functionalized Sponge for High-Efficiency Clean Water Generation with Dual-Purpose Solar Evaporation and Contaminant Adsorption

Highly salt-resistant 3D melamine sponge-polypyrrole composites for efficient solar interfacial evaporation

Recyclable and efficient ocean biomass-derived hydrogel photothermal evaporator for thermally-localized solar desalination

Potentially scalable fabrication of salt-rejection evaporator based on electrogenerated polypyrrole-coated nickel foam for efficient solar steam generation