Abstract:We present and propose a complete and iterative integrated-circuit and electro-magnetic (EM) co-design methodology and procedure for a low-voltage sub-1 GHz class-E PA. The presented class-E PA consists of the on-chip power transistor, the on-chip gate driving circuits, the off-chip tunable LC load network and the off-chip LC ladder low pass filter. The design methodology includes an explicit design equation based circuit components values' analysis and numerical derivation, output power targeted transistor size and low pass filter design, and power efficiency oriented design optimization. The proposed design procedure includes the power efficiency oriented LC network tuning, the detailed circuit/EM co-simulation plan on integrated circuit level, package level and PCB level to ensure an accurate simulation to measurement match and first pass design success. The proposed PA is targeted to achieve more than 15 dBm output power delivery and 40% power efficiency at 433 MHz frequency band with 1.5 V low voltage supply. The LC load network is designed to be off-chip for the purpose of easy tuning and optimization. The same circuit can be extended to all sub-1 GHz applications with the same tuning and optimization on the load network at different frequencies. The amplifier is implemented in 0.13 μm CMOS technology with a core area occupation of 400 μm by 300 μm. Measurement results showed that it provided power delivery of 16.42 dBm at antenna with efficiency of 40.6%. A harmonics suppression of 44 dBc is achieved, making it suitable for massive deployment of IoT devices.

Highly Integrated PA-PIFA With a Wide Frequency Tuning Range

Substrate Integrated Waveguide Based Class‐f Power Amplifier

A High-Efficiency Low-Voltage Class-E PA for IoT Applications in Sub-1 GHz Frequency Range

Fully integrated pseudo differential K-band power amplifier in 0.13um standard CMOS

A Class-F Based Power Amplifier with Optimized Efficiency in Triple-Band

A Novel Compact Varactor-Tunable PIFA Antenna for ISDB-T Application

Low-Profile Compact Circularly Polarized Slot-Etched PIFA Using Even and Odd Modes

A Modified PIFA with a Small Ground Plane

A 22.8 GHz to 32.8 GHz Compact Power Amplifier with a 15 Dbm Output P1dB and 36.5% Peak PAE in 65-Nm CMOS.

Feeding reconfigurable PIFA for GSM/PCS/DCS applications

Design and Performance Investigation of a Dual-Element PIFA Array at 2.5 GHz for MIMO Terminal

Three-Dimensional Integrated Circularly Polarized Filtering Antenna Array With High-Efficiency Hybrid Feeding Network

High Gain and Wideband Antenna-in-Package Solution Using Fan-Out Technology

Low-Cost Compact Circularly Polarized Dual-Layer PIFA for Active RFID Reader

Modified PIFA and Its Array for MIMO Terminals

Compact Planar Inverted-F Antenna for MicroSats Omnidirectional Communications

Dual-Band Decoupling for Two Back-to-Back PIFAs

Tunable Dual-band IFA Antenna using LC Resonators

Design of Multioctave PA Based on Spoof Surface Plasmon Polaritons

A novel design methodology for ultrawideband high‐efficiency hybrid extended continuous inverse class‐F power amplifier

Single-PCB Fabricated, Ultrawideband, and Wide-Scanning Phased Array Antenna With Vertically Integrated Resistive Frequency-Selective Surface