Enhanced Methane Production Efficiency with In Situ Intermittent Heating Assisted CO 2 Replacement of Hydrates

Qian Ouyang,Shuanshi Fan,Yanhong Wang,Xuemei Lang,Shenglong Wang,Yucheng Zhang,Chi Yu
DOI: https://doi.org/10.1021/acs.energyfuels.0c02562
2020-09-18
Abstract:Natural gas hydrates attract worldwide attention for extensive reserve. Current exploitation methods of thermal stimulation, depressurization, and inhibitor injection consume much energy, inducing formation instability or marine biological problems. In this work, a novel in situ intermittent heating-assisted CO<sub>2</sub> replacement (IIAR) method was proposed to enhance methane production efficiency of hydrates. Experiments investigated recovery performance with an electrical rod simulating the in situ heating, tested at 275.15–279.15 K and 4.00–13.06 MPa. The results indicated that the presence of N<sub>2</sub> and liquid CO<sub>2</sub> was conducive to CH<sub>4</sub> hydrate exploitation. Rising temperature and decreasing pressure assisted IIAR dissociate partial hydrates and promote further CH<sub>4</sub>–CO<sub>2</sub>/N<sub>2</sub> replacement. The maximum CH<sub>4</sub> recovery percentage was 52.42% obtained at 279.15 K and 8.01 MPa in 48 h. The exploitation time could be shortened by 40–60% using IIAR compared with pure CO<sub>2</sub> and CO<sub>2</sub>/N<sub>2</sub> replacement. The improved recovery performance indicated that IIAR was more competitive than pure CO<sub>2</sub> and CO<sub>2</sub>/N<sub>2</sub> replacement and CO<sub>2</sub> replacement combined with thermal stimulation. Further reduction of exploitation time and improvement of methane production efficiency demonstrated that intensive heating modes of IIAR increased exploitation economy and reduced methane consumption.This article has not yet been cited by other publications.
energy & fuels,engineering, chemical
What problem does this paper attempt to address?