Highly Reversible Zn Metal Anodes Enabled by Freestanding, Lightweight, and Zincophilic MXene/Nanoporous Oxide Heterostructure Engineered Separator for Flexible Zn-MnO 2 Batteries
Yongling An,Yuan Tian,Quanyan Man,Hengtao Shen,Chengkai Liu,Yi Qian,Shenglin Xiong,Jinkui Feng,Yitai Qian
DOI: https://doi.org/10.1021/acsnano.2c01571
IF: 17.1
2022-03-31
ACS Nano
Abstract:Aqueous zinc (Zn)-ion batteries are regarded as promising candidates for large-scale energy storage systems because of their high safety, low cost, and environmental benignity. However, the dendrite issue of Zn anode hinders their practical application. Herein, a freestanding, lightweight, and zincophilic MXene/nanoporous oxide heterostructure engineered separator is designed to stabilize a Zn metal anode. The nanoporous oxides prepared by a one-step vacuum distillation technique afford the advantages of large surface area, high porosity, and homogeneous porous structure. The zincophilic layer can homogenize the electric field distribution, facilitate ion diffusion kinetics, reduce local current density, and promote even Zn ionic flux, which will regulate uniform Zn deposition and suppress side reactions. Accordingly, dendrite-free Zn anodes with stable cyclability are achieved for over 500 h at an ultrahigh area capacity of 10 mAh cm–2. Besides, flexible, long-lifespan, and high-rate N/S-doped three-dimensional 2||Zn full cells are constructed with the engineered separator. Moreover, this strategy can be successfully extended to lithium, sodium, potassium, and magnesium metal batteries, indicating that separator regulation is a universal approach to overcome the challenges of metal batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.2c01571.TGA curves of hydroxide precursors; XPS spectra and pore size distributions of porous oxides; XRD pattern, SEM and EDS mapping images of MAX; Raman spectrum, XRD pattern, XPS spectra, SEM and EDS mapping images of MXene; SEM images of pristine and modified separators; optical images of modified separator soaked in 2 M ZnSO4 electrolyte with different immersion times; XRD patterns of modified separator soaked in 2 M ZnSO4 electrolyte with different immersion times; SEM images of modified separator soaked in 2 M ZnSO4 electrolyte for 120 h; schematic and SEM images of Ti and Cu current collectors deposited Zn with pristine and modified separators; voltage–time curves of Zn||Ti cells using modified separator; SEM images of Ti current collectors and EIS curves for Zn||Ti cells using pristine and modified separators after cycles; Coulombic efficiencies and voltage–time curves of Zn||Cu cells with modified separator; cycling performance of Zn||Zn cell with modified separator; voltage hysteresis and voltage-capacity curves of Zn||Zn cells with modified separators; SEM images of Zn anodes and EIS curves for Zn||Zn cells using pristine and modified separators after cycles; XRD patterns, Raman spectrum, XPS spectra, SEM and EDS mapping images of MnO2 and @2; C 1s and SEM images of NS/2; charge/discharge curves of full cells with pristine separator; capacity retentions and charge/discharge curves of full cells with pristine and modified separators; SEM images of Zn anodes for full cells with pristine and modified separators after cycles; photos of full cells with modified separator powering an LED light; overpotential, voltage–time curves and Coulombic efficiencies of Li||Cu, Na||Cu and K||Cu cells using pristine and modified separator; cycling performance of Li||Li, Na||Na, K||K and Mg||Mg cells using pristine and modified separators (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology