A 3D-Printed Piezoelectric Microdevice for Human Energy Harvesting for Wearable Biosensors

Ihor Sobianin,Sotiria D. Psoma,Antonios Tourlidakis

DOI: https://doi.org/10.3390/mi15010118

IF: 3.4

2024-01-11

Micromachines

Abstract:The human body is a source of multiple types of energy, such as mechanical, thermal and biochemical, which can be scavenged through appropriate technological means. Mechanical vibrations originating from contraction and expansion of the radial artery represent a reliable source of displacement to be picked up and exploited by a harvester. The continuous monitoring of physiological biomarkers is an essential part of the timely and accurate diagnosis of a disease with subsequent medical treatment, and wearable biosensors are increasingly utilized for biomedical data acquisition of important biomarkers. However, they rely on batteries and their replacement introduces a discontinuity in measured signals, which could be critical for the patients and also causes discomfort. In the present work, the research into a novel 3D-printed wearable energy harvesting platform for scavenging energy from arterial pulsations via a piezoelectric material is described. An elastic thermoplastic polyurethane (TPU) film, which forms an air chamber between the skin and the piezoelectric disc electrode, was introduced to provide better adsorption to the skin, prevent damage to the piezoelectric disc and electrically isolate components in the platform from the human body. Computational fluid dynamics in the framework of COMSOL Multiphysics 6.1 software was employed to perform a series of coupled time-varying simulations of the interaction among a number of associated physical phenomena. The mathematical model of the harvester was investigated computationally, and quantification of the output energy and power parameters was used for comparisons. A prototype wearable platform enclosure was designed and manufactured using fused filament fabrication (FFF). The influence of the piezoelectric disc material and its diameter on the electrical output were studied and various geometrical parameters of the enclosure and the TPU film were optimized based on theoretical and empirical data. Physiological data, such as interdependency between the harvester skin fit and voltage output, were obtained.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied

What problem does this paper attempt to address?

The paper aims to address the battery dependency issue faced by wearable biosensors in continuous monitoring of physiological biomarkers. Specifically, the paper explores a novel 3D-printed piezoelectric microdevice that can harvest energy from arterial pulsations to power wearable biosensors. This device can avoid data discontinuity issues caused by battery replacement, reduce patient discomfort, and provide a sustainable energy source.

To achieve this goal, the research team designed an air chamber containing an elastic thermoplastic polyurethane (TPU) film, which is placed between the skin and the piezoelectric disc electrode to better conform to the skin, prevent damage to the piezoelectric disc, and electrically isolate the components in the platform from the human body. Fluid dynamics simulations were conducted using COMSOL Multiphysics software to computationally validate the model and optimize geometric parameters to improve energy harvesting efficiency. Experimental results show that the device can effectively harvest energy from arterial pulsations and generate electricity that can be used to power wearable devices.