Removal of H 2 S from simulated blast furnace gas by adsorption over metal-modified 13X zeolite
Yan Guo,Bin Xiang,Bai Zhao,Wei Wang,Yuqiao Xiang,Junjie Liao,Liping Chang,Jinghong Ma,Weiren Bao
DOI: https://doi.org/10.1016/j.fuel.2022.127261
IF: 7.4
2023-01-01
Fuel
Abstract:With the promulgation of new regulations, it's of great significance to desulfurization from blast furnace gas (BFG) to meet the clean production of iron making industry. Among different desulfurization technologies, zeolite-based sorbents are extensively studied due to the easy operation, low operating cost, and long service life. In this research, the 13X zeolite was selected, and it was ion-exchanged by different metal elements (Cu, Zn, Co, Mn) to prepared a series of sorbents. A fixed bed was used to evaluate their desulfurization behavior, and the XRD, SEM, ICP-OES, XPS, N 2 adsorption, and CO 2 -TPD were carried out to characterize the physical and chemical properties of sorbents. The effects of water vapor content and desulfurization temperature on the removal of H 2 S were investigated. The regeneration performance of sorbent was also explored. The results showed that the Cu 25 X-Ex sorbent has the highest breakthrough sulfur capacity of 7.71 g S/100 g sorbent in dry simulated BFG. The breakthrough sulfur capacity of Cu 25 X-Ex was 4.52 g S/100 g sorbent when the water vapor content is 5 %. The CO 2 -TPD results showed that the basic sites were favorable for the adsorption of H 2 S on the surface of zeolite. The XPS results illustrate that the forms of S adsorbed on Cu 25 X-Ex sorbent were CuS, CuS 2 O 3 , and CuSO 4 , so it is suggested that the reaction between adsorbed H 2 S with the metal cations in sorbent occurred subsequently. The research indicated that Cu 25 X-Ex sorbent has potential applicability in the desulfurization of blast furnace gas.
energy & fuels,engineering, chemical