Indirect reduction of CO 2 and recycling of polymers by manganese-catalyzed transfer hydrogenation of amides, carbamates, urea derivatives, and polyurethanes

Xin Liu,Thomas Werner

DOI: https://doi.org/10.1039/d1sc02663a

IF: 8.4

2021-01-01

Chemical Science

Abstract:A Mn–PNP complex proved to be a suitable catalyst for the transfer hydrogenation of amides, carbamates, urea derivatives and even polyurethanes.

chemistry, multidisciplinary

What problem does this paper attempt to address?

A Cu2o-Derived Polymeric Carbon Nitride Heterostructured Catalyst For The Electrochemical Reduction Of Carbon Dioxide To Ethylene

Wenwen Lin,Hao Chen,Zihao Li,Kotaro Sasaki,Siyu Yao,Zihao Zhang,Jing Li,Jie Fu

DOI: https://doi.org/10.1002/cssc.202100659

IF: 8.4

2021-01-01

ChemSusChem

Abstract:The electroreduction of carbon dioxide to hydrocarbons has been proposed as a promising way to utilize CO2 and maintain the ecosystem carbon balance. However, the selective reduction of CO2 to C-2 hydrocarbons is still challenging. In this study, a highly efficient heterostructured catalyst has been developed, composed of a carbon nitride (CN)-encapsulated copper oxide hybrid (CuxO/CN). The interaction between the metal and carbon nitride in the heterostructured catalysts improves the intrinsic electrical conductivity and the charge transfer processes at metal-support interfaces. A remarkable enhancement in the selectivity of hydrocarbons is achieved with these modified Cu-based electrocatalysts, with an onset potential of -0.4 V and high C2H4 faradaic efficiency of 42.2 %, and these catalysts can also effectively suppress H-2 evolution during the CO2 reduction reaction. This work provides a simple and cost-effective method for synthesizing CN-encapsulated catalysts that provides the possibility of efficiently converting CO2 into C-2 hydrocarbons.
Directly Knitted Ruthenium Pincer Complexes with Enhanced Activity As Recyclable Single-Site Catalysts for Hydrogenation of CO2 to Methanol

Daheng Wen,Jiangbo Chen,Qingshu Zheng,Siqi Yang,Tao Tu

DOI: https://doi.org/10.31635/ccschem.022.202202233

2023-01-01

CCS Chemistry

Abstract:Considering the importance of the valorization of CO2, a number of phosphine-containing ruthenium pincer complexes have been successfully heterogenized using a "direct knitting" strategy without any premodification. The resulting porous organometallic polymers (POMPs) with high specific-surface areas, hierarchical pores, and uniformly dispersed Ru single-sites exhibited outstanding catalytic activity toward the N-formylation of diverse amines with CO2. Besides excellent turnover number (TON, 5 x 10(5)) and turnover frequency (TOF, 5592 h(-1)), the obtained formamides were readily hydrogenated to methanol with the same catalyst. Consequently, an amine-assisted direct hydrogenation system of CO2 to methanol was established by POMPs with higher activity and TON (1.46 x (10)(4)) than their molecular precursors, shedding light on the direct valorization of CO2 and carbon neutral recycling.
Manganese(I) Catalyzed CO2 Reduction Processes in Homogenous Phase

Sylwia Kostera,Luca Gonsalvi

DOI: https://doi.org/10.1002/cctc.202301391

IF: 4.5

2023-12-09

ChemCatChem

Abstract:The catalytic activation of carbon dioxide (CO2) can be a promising tool for the use of this abundant, non‐flammable and non‐toxic gas as feedstock for C1 chemical synthesis, in particular for bulk products such as formic acid (HCOOH) and methanol (CH3OH). The key for successful, widespread use of CO2 is the design and application of efficient, thermally robust and cheap catalysts. In the last decade, the use of earth‐abundant transition metal complexes, in particular those of 3d metals, has shown promising results. In this review article, a comprehensive summary of the main catalytic systems described in the literature for homogeneous Mn(I)‐catalyzed CO2 reduction processes (hydrogenation, hydroboration and hydrosilylation) will be described, with particular attention to the effect of stabilizing ligands, reaction conditions and need for additives, together with mechanistic details often obtained by a combination of experimental data and DFT calculations.

chemistry, physical
Hydrogenative Depolymerization of Polyurethanes Catalyzed by a Manganese Pincer Complex

Viktoriia Zubar,Andreas T Haedler,Markus Schütte,A Stephen K Hashmi,Thomas Schaub

DOI: https://doi.org/10.1002/cssc.202101606

IF: 8.4

2022-01-10

ChemSusChem

Abstract:Chemical recycling, in particular hydrogenative depolymerization, offers a promising way to utilize plastic waste. This report covers the manganese-catalyzed hydrogenation of polyurethane materials to the corresponding monomeric units. The key to success is a Mn pincer complex as a potent hydrogenation catalyst in combination with elevated temperatures (up to 200 °C) and appropriate solvents to ensure sufficient solubility of the polymers. A wide range of polyurethane samples of varying polyol and isocyanate compositions, some of which feature significant amounts of urea functionalities, are depolymerized, releasing polyetherols and diaminotoluene (TDA) in yields of up to 89 % and 76 %, respectively.
Efficient Depolymerization of Polyester and Polycarbonate Plastic Waste Catalyzed by Commercially Available Homogeneous and Heterogeneous Manganese Catalysts

Daniel L. Lourenço,Daniela F. Oliveira,Ana C. Fernandes

DOI: https://doi.org/10.1002/adsu.202300381

IF: 6.737

2023-09-09

Advanced Sustainable Systems

Abstract:New catalytic systems for the efficient depolymerization of plastic waste combining the use of commercially available catalysts containing an earth‐abundant metal with mild and easy‐to‐handle reducing agent. This work describes the depolymerization of several polyester and polycarbonate plastic waste in value‐added compounds catalyzed by the air stable, cheap and commercially available manganese compounds Mn(OTf)2, Mn2(CO)10, MnBr(CO)5, and MeCpMn(CO)3 using boranes and silanes as the reducing agents with good to excellent yields. Commercial heterogeneous manganese catalyst, manganeses(II) ethyl/butyl phosphonate silica (Si‐Mn), has also proven to be very efficient in the reductive depolymerization of a variety of polyesters and the polycarbonate PC.BPA. The use of Mn(OTf)2, Mn2(CO)10 and Si‐Mn in consecutive depolymerization of polyesters is also investigated, showing that these catalysts remain their excellent activity after several reactions.

materials science, multidisciplinary,green & sustainable science & technology
Highly Efficient and Selective N-Formylation of Amines with CO2 and H2 Catalyzed by Porous Organometallic Polymers

Yajing Shen,Qingshu Zheng,Zhe-Ning Chen,Daheng Wen,James H. Clark,Xin Xu,Tao Tu

DOI: https://doi.org/10.1002/anie.202011260

2021-01-01

Abstract:The valorization of carbon dioxide (CO2) to fine chemicals is one of the most promising approaches for CO2 capture and utilization. Herein we demonstrated a series of porous organometallic polymers could be employed as highly efficient and recyclable catalysts for this purpose. Synergetic effects of specific surface area, iridium content, and CO2 adsorption capability are crucial to achieve excellent selectivity and yields towards N-formylation of diverse amines with CO2 and H-2 under mild reaction conditions even at 20 ppm catalyst loading. Density functional theory calculations revealed not only a redox-neutral catalytic pathway but also a new plausible mechanism with the incorporation of the key intermediate formic acid via a proton-relay process. Remarkably, a record turnover number (TON=1.58x10(6)) was achieved in the synthesis of N,N-dimethylformamide (DMF), and the solid catalysts can be reused up to 12 runs, highlighting their practical potential in industry.
Highly Selective Customized Reduction Products for Hydrogenation of CO2-derived Urea Derivatives or Carbamates.

Jun Zhu,Yongtao Wang,Jia Yao,Haoran Li

DOI: https://doi.org/10.1039/d4sc06814a

IF: 8.4

2024-01-01

Chemical Science

Abstract:Catalytic hydrogenation of CO2-derived urea derivatives or carbamates provides an indirect and efficient solution for the chemical transformation of CO2 under mild conditions, avoiding the high temperatures and pressure required for direct catalysis to overcome the thermodynamic energy barrier and the low yield of the targeted product. However, the reported catalyst systems focus mainly on the preparation of one specific product, and switching the product type requires external acid/base additives, which limits the development of this protocol. Here, we report a promising route for the hierarchical reduction of CO2-derived urea derivatives or carbamates using an Ir-based PNP pincer catalyst system, enabling the selective production of specific chemicals (methanol, formamides, N-methylamines, or N,N-dimethylamines) for the first time by altering reaction conditions, especially the reaction temperature. This work demonstrates the significant potential of hydrogenation of urea derivatives or carbamates for the indirect conversion of CO2 to valuable chemicals and fuels, providing a facile temperature-dependent product-switching strategy in one catalytic system.
Highly Efficient and Selective N‐Formylation of Amines with CO 2 and H 2 Catalyzed by Porous Organometallic Polymers

Yajing Shen,Qingshu Zheng,Zhe‐Ning Chen,Daheng Wen,James H. Clark,Xin Xu,Tao Tu

DOI: https://doi.org/10.1002/ange.202011260

2021-01-01

Angewandte Chemie

Abstract:The valorization of carbon dioxide (CO 2 ) to fine chemicals is one of the most promising approaches for CO 2 capture and utilization. Herein we demonstrated a series of porous organometallic polymers could be employed as highly efficient and recyclable catalysts for this purpose. Synergetic effects of specific surface area, iridium content, and CO 2 adsorption capability are crucial to achieve excellent selectivity and yields towards N‐formylation of diverse amines with CO 2 and H 2 under mild reaction conditions even at 20 ppm catalyst loading. Density functional theory calculations revealed not only a redox‐neutral catalytic pathway but also a new plausible mechanism with the incorporation of the key intermediate formic acid via a proton‐relay process. Remarkably, a record turnover number (TON=1.58×10 6 ) was achieved in the synthesis of N,N‐dimethylformamide (DMF), and the solid catalysts can be reused up to 12 runs, highlighting their practical potential in industry.
Manganese-Catalyzed Hydrogenation of Amides and Polyurethanes: Is Catalyst Inhibition an Additional Barrier to the Efficient Hydrogenation of Amides and Their Derivatives?

James Luk,Conor L. Oates,José A. Fuentes Garcia,Matthew L. Clarke,Amit Kumar,José A. Fuentes Garcia

DOI: https://doi.org/10.1021/acs.organomet.3c00399

2024-01-09

Organometallics

Abstract:The hydrogenation of amides and other less electrophilic carbonyl derivatives with an N-C=O functionality requires significant improvements in scope and catalytic activity to be a genuinely useful reaction in industry. Here, we report the results of a study that examined whether such reactions are further disadvantaged by nitrogen-containing compounds such as aliphatic amines acting as inhibitors on the catalysts. In this case, an enantiomerically pure manganese catalyst previously established to be efficient in the hydrogenation of ketones, N-aryl-imines, and esters was used as a prototype of a manganese catalyst. This was accomplished by doping a model ester hydrogenation with various nitrogen-containing compounds and monitoring progress. Following from this, a protocol for the catalytic hydrogenation of amides and polyurethanes is described, including the catalytic hydrogenation of an axially chiral amide that resulted in low levels of kinetic resolution. The hypothesis of nitrogen-containing compounds acting as an inhibitor in the catalytic hydrogenation process has also been rationalized by using spectroscopy (high-pressure infrared (IR), nuclear magnetic resonance (NMR)) and mass spectrometry studies.

chemistry, inorganic & nuclear, organic
A Tailored Versatile and Efficient NHC-Based NNC-Pincer Manganese Catalyst for Hydrogenation of Polar Unsaturated Compounds.

Zeyuan Wei,Hengxu Li,Yujie Wang,Qiang Liu

DOI: https://doi.org/10.1002/anie.202301042

2023-01-01

Abstract:The reactivity of metal-hydride complexes can be harnessed by the modification of ancillary ligands. With the aim of improving the hydride-donor ability of the key Mn-H intermediate and reducing steric hindrance, we herein report the rational design of a versatile and efficient NHC-based NNC-pincer Mn catalyst for hydrogenation reactions. This newly developed catalyst exhibited higher activity than the corresponding NNP-pincer Mn catalyst owing to its reduced steric hindrance and enhanced Mn-H σ-bonding orbital energy level through a π-antibonding interaction. Using this highly active NNC-pincer Mn catalyst, a rich array of polar unsaturated compounds (>80 examples) including esters, N-heteroarenes, amides, carbonates, and urea derivatives, were successfully hydrogenated under relatively mild conditions. This work represents a rare example of a general phosphine-free Mn-catalyzed hydrogenation system.
Efficient and chemoselective hydrogenation of aldehydes catalyzed by well-defined PN 3 –pincer manganese( ii ) catalyst precursors: an application in furfural conversion

Sandeep Suryabhan Gholap,Abdullah Al Dakhil,Priyanka Chakraborty,Huaifeng Li,Indranil Dutta,Kuo-Wei Huang,Pradip K. Das

DOI: https://doi.org/10.1039/d1cc04808b

IF: 4.9

2021-01-01

Chemical Communications

Abstract:Well-defined and air-stable PN 3 –pincer manganese( ii ) complexes were developed for chemoselective hydrogenation of aldehydes into alcohols under mild conditions.

chemistry, multidisciplinary
Carbon Dioxide Hydrogenation to Formate Catalyzed by a Bench-Stable, Non-Pincer-Type Mn(I) Alkylcarbonyl Complex

Sylwia Kostera,Stefan Weber,Maurizio Peruzzini,Luis F. Veiros,Karl Kirchner,Luca Gonsalvi

DOI: https://doi.org/10.1021/acs.organomet.0c00710

2021-04-20

Organometallics

Abstract:The catalytic reduction of carbon dioxide is a process of growing interest for the use of this simple and abundant molecule as a renewable building block in C1-chemical synthesis and for hydrogen storage. The well-defined, bench-stable alkylcarbonyl Mn(I) bis(phosphine) complex fac-[Mn(CH2CH2CH3)(dippe)(CO)3] [dippe = 1,2-bis(diisopropylphosphino)ethane] was tested as an efficient and selective non-precious-metal precatalyst for the hydrogenation of CO2 to formate under mild conditions (75 bar total pressure, 80 °C), in the presence of a Lewis acid co-catalyst (LiOTf) and a base (DBU). Mechanistic insight into the catalytic reaction is provided by means of density functional theory (DFT) calculations.

chemistry, inorganic & nuclear, organic
Evaluating Heterodinuclear Mg(II)M(II) (M = Mn, Fe, Ni, Cu, and Zn) Catalysts for the Chemical Recycling of Poly(cyclohexene carbonate)

Madeleine L. Smith,Thomas M. McGuire,Antoine Buchard,Charlotte K. Williams

DOI: https://doi.org/10.1021/acscatal.3c04208

IF: 12.9

2023-12-22

ACS Catalysis

Abstract:Polymer chemical recycling to monomers (CRM) is important to help achieve a circular plastic economy, but the "rules" governing catalyst design for such processes remain unclear. Here, carbon dioxide-derived polycarbonates undergo CRM to produce epoxides and carbon dioxide. A series of dinuclear catalysts, Mg(II)M(II) where M(II) = Mg, Mn, Fe, Co, Ni, Cu, and Zn, are compared for poly(cyclohexene carbonate) depolymerizations. The recycling is conducted in the solid state, at 140 °C monitored...

chemistry, physical
Composition-dependent catalytic behaviour of Pt–Pd alloy in transfer hydrogenation of carbonates at room-temperature

Jiaxin Liu,Chuang Li,Hongyu Niu,Changhai Liang

DOI: https://doi.org/10.1039/d2cy01825j

2022-12-21

Abstract:Transfer hydrogenation of carbonates using glucose to produce formates and gluconates is an attractive pathway for valorising waste streams. The investigation reveals a cooperative catalytic mechanism and composition-dependent behaviour of PtxPdy/CNTs catalysts. Insights into the mechanism will allow transfer hydrogenation of carbonates at room temperature to be widely utilized.

chemistry, physical
Highly Efficient Catalysts for CO2 Hydrogenation to Formic Acid in Water Catalyzed by Hydrophobic Porous Polymers Containing Stable Metal–hydride

Wentao Ma,Wenjie Xiong,Jinling Hu,Jiao Geng,Xingbang Hu

DOI: https://doi.org/10.1039/d3gc04727j

IF: 9.8

2024-01-01

Green Chemistry

Abstract:Although CO2 hydrogenation to formic acid has been widely investigated, the design of highly stable and effective heterogeneous catalysts is a long-standing challenge due to the instability of the active intermediate in water. Herein, both theoretical and experimental results revealed that the active Ir-H species appearing in the CO2 hydrogenation process can be easily hydrolyzed, resulting in the deactivation of the catalyst. Further research constructed a strategy to protect the active Ir-H species by utilizing a directly-knitted PNP-based catalyst (p-PNP-Ir) for CO2 hydrogenation to formic acid. An unpredictable conversion (TON = 1.11 x 10(6)) can be achieved using p-PNP-Ir in water, being 3.15 times higher than that using the monomer PNP-Ir. Besides, the solid catalysts can be easily recycled for at least 15 runs without activity loss, highlighting their potential for practical applications in industry.
Intercalated Zirconium Phosphate Promotes Reductive Amination of Carbon Dioxide

Huiying Liao,Yongjun Jiang,Xinjia Wei,Xiuge Zhao,Wenkai Lai,Ning An,Yuan Ma,Sheng Dai,Zhenshan Hou

DOI: https://doi.org/10.1021/acssuschemeng.3c06479

IF: 8.4

2024-01-01

ACS Sustainable Chemistry & Engineering

Abstract:The catalytic conversion of carbon dioxide into fine chemicals and intermediates is one of the most promising approaches to carbon recycling. In this work, we demonstrated that after the layered alpha-zirconium phosphate(alpha-ZrP) was exfoliated by using tetrabutylammonium hydroxide, a cationic Ru(II) complex ([RuH(CO)(dppp)(en)]Cl, dppp = 1,3-bis(diphenylphosphino)propane; en = ethylene-diamine) can be intercalated into ZrP layers. Notably, as the Ru(II) complex-intercalated ZrP was further modified by the ionic liquid (BMIMOAc, 1-butyl-3-methylimidazolium acetate), the resulting catalyst exhibited superior catalytic activity for the N-formylation of amines with CO2/H2 to produce formamide. The detailed characterization revealed that the ionic liquid was also encapsulated into the ZrP interlayer and played an additional role in exfoliating ZrP. In particular, further studies indicated that amine molecules can intercalate favorably into the interlayer under the reaction conditions and thus were easily accessible to the Ru(II) active sites, being beneficial for the N-formylation reaction. The reaction includes the following key steps: CO2 was synergistically activated by BMIMOAc and exfoliated ZrP layers; hydrogen was split by the Ru(II) active center to form Ru-H delta-; morpholine was intercalated into ZrP layers and then participated in the reaction. This implied that the reaction actually occurred within the ZrP interlayers, enhancing the reaction rate due to the enrichment of reactants. The formate species was detected as intermediates in this reaction, followed by dehydrating to afford formamide. This catalytic system exhibits the huge advantage of being easy accessibility, high efficiency, and recyclability.
Highly Efficient Catalyst for CO2 Hydrogenation to Formic Acid in Water Catalyzed by Hydrophobic Porous Polymers Containing Stable Metal-Hydride

Wentao Ma,Wenjie Xiong,Jinling Hu,Jiao Geng,Xingbang Hu

DOI: https://doi.org/10.1039/d3gc04727j

IF: 9.8

2024-02-29

Green Chemistry

Abstract:Though the CO2 hydrogenation to formic acid has been widely investigated, the design of highly stable and effective heterogeneous catalysts is a long-lasting challenge due to the instability of the active intermediate in water. Herein, both theoretic and experimental results revealed that the active Ir–H species appearing in the CO2 hydrogenation process can be easily hydrolyzed, resulting in the deactivation of the catalyst. Further research constructs a strategy to protect the active Ir–H by utilizing a directly-knitted PNP-based catalyst (p-PNP-Ir) for the CO2 hydrogenation to formic acid. An unpredictable conversion (TON = 1.11×106) can be achieved using p-PNP-Ir in water, being 3.15 times higher than that using the monomer PNP-Ir. Besides, the solid catalysts can be easily recycled for at least 15 runs without activity loss, highlighting their potential of practical application in industry.

chemistry, multidisciplinary,green & sustainable science & technology
Reversible hydrogenation of carbon dioxide to formic acid using a Mn-pincer complex in the presence of lysine

Duo Wei,Rui Sang,Peter Sponholz,Henrik Junge,Matthias Beller

DOI: https://doi.org/10.1038/s41560-022-01019-4

IF: 56.7

2022-05-20

Nature Energy

Abstract:Nature Energy, Published online: 19 May 2022; doi:10.1038/s41560-022-01019-4 Formic acid is a convenient hydrogen storage medium with storage release occurring via reversible hydrogenation of CO2 and facilitated by noble metal-based catalysts. Now, reversible storage release is demonstrated using a non-noble, Mn-based catalyst in the presence of an amino acid.

materials science, multidisciplinary,energy & fuels
Dehydrogenation of formic acid mediated by a Phosphorus–Nitrogen PN 3 P-manganese pincer complex: Catalytic performance and mechanistic insights

Indranil Dutta,Nasser A. Alobaid,Fabio Lorenzo Menicucci,Priyanka Chakraborty,Chao Guan,Delong Han,Kuo-Wei Huang

DOI: https://doi.org/10.1016/j.ijhydene.2022.04.220

IF: 7.2

2022-05-18

International Journal of Hydrogen Energy

Abstract:The utilization of formic acid as a liquid organic hydrogen carrier has taken a vast interest lately because of several desirable properties. The state-of-the-art homogenous catalysts known for formic acid dehydrogenation are mainly based on noble metals such as iridium or ruthenium. 3d metals are considered to be an attractive alternative due to their abundance and low toxicity. Exploration of 3d metals has achieved exciting results mainly with iron-based catalysts; however, manganese has not received much attention, and only a few examples are available. Here we report a manganese complex [Mn(PN 3 P)(CO) 2 ]Br containing a pincer backbone, as an efficient catalyst for formic acid dehydrogenation. Under the optimized condition, the complex afforded a TON of 15,200. To the best of our knowledge, this is considered one of the best TON achieved using a manganese-based complex with excellent selectivity. Mechanistic studies suggested that the imine arm participates in the formic acid activation/deprotonation step, emphasizing the importance of metal-ligand cooperativity during substrate activation to promote catalytic efficacy.

energy & fuels,electrochemistry,chemistry, physical
In-situ polymerization induced atomically dispersed manganese sites as cocatalyst for CO2 photoreduction into synthesis gas

Jia Yang,Zhiyuan Wang,Jianchao Jiang,Wenxing Chen,Fan Liao,Xiao Ge,Xiao Zhou,Min Chen,Ruilong Li,Zhenggang Xue,Gang Wang,Xuezhi Duan,Guoqing Zhang,Yang-Gang Wang,Yuen Wu

DOI: https://doi.org/10.1016/j.nanoen.2020.105059

IF: 17.6

2020-10-01

Nano Energy

Abstract:Developing highly-active single atom catalyst to realize visible light driven photocatalytic CO2 reduction into value-added chemicals is an appealing route toward utilizing CO2 as the only carbon source for a sustainable future. Herein, we have successfully synthesized the atomically dispersed manganese sites in nitrogen doped carbon via an in-situ polymerization approach. The in-situ oxidative polymerization of pyrrole monomer directly catalyzed by manganese dioxide could extract the Mn atoms from MnO2 and stabilize them within the as-generated polymer skeleton in one step. After high-temperature pyrolysis, atomically dispersed Mn sites are obtained, firmly and homogeneously anchored by the as-generated N-doped carbon support. The as obtained catalyst can act as cocatalyst to realize photocatalytic CO2 reduction to produce synthesis gas under visible light using [Ru(bpy)3]Cl2 (bpy: 2,2′-bipyridine) as photosensitizer and triethanolamine as sacrifacial agent, with gas evolution rate of CO 1470 μmol/h/g, H2 1310 μmol/h/g and tunable CO/H2 ratio from 1.12 to 0.43. Our approach is versatile to prepare a variety of morphology-controllable single atom catalysts from metal oxides for important industrial applications.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology

Indirect reduction of CO 2 and recycling of polymers by manganese-catalyzed transfer hydrogenation of amides, carbamates, urea derivatives, and polyurethanes

A Cu2o-Derived Polymeric Carbon Nitride Heterostructured Catalyst For The Electrochemical Reduction Of Carbon Dioxide To Ethylene

Directly Knitted Ruthenium Pincer Complexes with Enhanced Activity As Recyclable Single-Site Catalysts for Hydrogenation of CO2 to Methanol

Manganese(I) Catalyzed CO2 Reduction Processes in Homogenous Phase

Hydrogenative Depolymerization of Polyurethanes Catalyzed by a Manganese Pincer Complex

Efficient Depolymerization of Polyester and Polycarbonate Plastic Waste Catalyzed by Commercially Available Homogeneous and Heterogeneous Manganese Catalysts

Highly Efficient and Selective N-Formylation of Amines with CO<sub>2</sub> and H<sub>2</sub> Catalyzed by Porous Organometallic Polymers

Highly Selective Customized Reduction Products for Hydrogenation of CO2-derived Urea Derivatives or Carbamates.

Highly Efficient and Selective N‐Formylation of Amines with CO <sub>2</sub> and H <sub>2</sub> Catalyzed by Porous Organometallic Polymers

Manganese-Catalyzed Hydrogenation of Amides and Polyurethanes: Is Catalyst Inhibition an Additional Barrier to the Efficient Hydrogenation of Amides and Their Derivatives?

A Tailored Versatile and Efficient NHC-Based NNC-Pincer Manganese Catalyst for Hydrogenation of Polar Unsaturated Compounds.

Efficient and chemoselective hydrogenation of aldehydes catalyzed by well-defined PN 3 –pincer manganese( ii ) catalyst precursors: an application in furfural conversion

Carbon Dioxide Hydrogenation to Formate Catalyzed by a Bench-Stable, Non-Pincer-Type Mn(I) Alkylcarbonyl Complex

Evaluating Heterodinuclear Mg(II)M(II) (M = Mn, Fe, Ni, Cu, and Zn) Catalysts for the Chemical Recycling of Poly(cyclohexene carbonate)

Composition-dependent catalytic behaviour of Pt–Pd alloy in transfer hydrogenation of carbonates at room-temperature

Highly Efficient Catalysts for CO2 Hydrogenation to Formic Acid in Water Catalyzed by Hydrophobic Porous Polymers Containing Stable Metal–hydride

Intercalated Zirconium Phosphate Promotes Reductive Amination of Carbon Dioxide

Highly Efficient Catalyst for CO2 Hydrogenation to Formic Acid in Water Catalyzed by Hydrophobic Porous Polymers Containing Stable Metal-Hydride

Reversible hydrogenation of carbon dioxide to formic acid using a Mn-pincer complex in the presence of lysine

Dehydrogenation of formic acid mediated by a Phosphorus–Nitrogen PN 3 P-manganese pincer complex: Catalytic performance and mechanistic insights

In-situ polymerization induced atomically dispersed manganese sites as cocatalyst for CO2 photoreduction into synthesis gas