Abstract:To improve the electrochemical kinetic performances of the Ti-V-based hydrogen storage alloys, the Pd element was introduced into the Ti0.8Zr0.2V2.7Mn0.5Cr0.8Ni1.0 alloy, and the structure and electrochemical properties of the Ti0.8Zr0.2V2.7Mn0.5Cr0.8Ni1.0Pdx (x=0–0.2) alloys were systematically investigated by X-ray diffraction (XRD), galvanostatic charge/discharge, high rate discharge (HRD), electrochemical impedance spectroscopy (EIS), linear polarization and potentiostatic step discharge measurements. The structural investigations show that all of the alloys consist of a C14 Laves phase and a V-based solid solution (VSS) phase. The increase of Pd content reduces the abundance of the C14 Laves phase, accordingly increases that of the V-based solid solution phase. Electrochemical measurements indicate that the activation property of the alloy electrodes is obviously improved after adding Pd due to its good electrocatalytic activity. With increasing Pd content, the maximum discharge capacity of the alloy electrodes first increases from 331mAh/g (x=0) to 357mAh/g (x=0.15) and then decreases to 338mAh/g (x=0.2), meanwhile, the cycling stability of the alloy electrodes is markedly improved. The HRD results reveal that the proper addition of Pd can effectively improve the electrochemical kinetic performances of the alloy electrodes. Further kinetic parameter measurements show that the charge-transfer reaction resistance of the alloy surface first decreases when x increases from 0 to 0.1, and then increases with x further increasing to 0.2, and the exchange current density and the hydrogen diffusion coefficient first increases and then decreases, indicating the charge-transfer reaction rate and the hydrogen diffusion rate were first accelerated and then slowed down due to the change of the lattice parameters, the crystallite size, the phase abundance and the electrocatalytic activity of the alloys with increasing Pd content. The optimum composition was found to be x=0.1 in this work.

The influence of trihaloacetic acids on the hydrogen sorption properties of palladium nanoparticles-modified AB 5 alloy in aprotic ionic liquid: Towards ionic liquid-based electrolytes for hydride batteries

The Electrochemical Behavior of Unmodified and Pd-NPs Modified AB5 Hydrogen Storage Alloy in Selected Protic and Aprotic Ionic Liquids (ILs): Towards ILs-Based Electrolytes for Ni-MH Batteries

Hydrogen-bond network manipulation of aqueous electrolytes with high-donor solvent additives for Al-air batteries

Electrochemical Properties of Ab(5) Type Hydrogen Storage Alloy As Anode Electrocatalyst of Pemfc

Electrochemical Properties of Rare-Earth Based Hydrogen Storage Alloy for Replacing Pt As the Anode Electrocatalyst in AFC

Simultaneous Regulation on Electrolyte Structure and Electrode Interface with Glucose Additive for High-Energy Aluminum Metal-Air Batteries

The Effect of the Iridium Alloying and Hydrogen Sorption on the Physicochemical and Electrochemical Properties of Palladium

Influence of an Imidazole-Based Ionic Liquid As Electrolyte Additive on the Performance of Alkaline Al-air Battery

Pd-Ag alloy hollow nanostructures with interatomic charge polarization for enhanced electrocatalytic formic acid oxidation

Inhibiting hydrogen evolution reaction by adjusting electrophilicity of quaternary ammonium salts for aluminum-air battery

Hydrogen oxidation kinetics on platinum-palladium bimetallic thin films for solid acid fuel cells

Interstitial Hydrogen Atom Modulation to Boost Hydrogen Evolution in Pd-Based Alloy Nanoparticles

Alkyl Phosphonic Acids: An Alternative to Phosphoric Acid in HT-Pemfcs

Ethylene Glycol Co‐Solvent Enables Stable Aqueous Ammonium‐Ion Batteries with Diluted Electrolyte

Simple Pd-Ag-H EAM Potentials for Hydrogen Storage Applications

Electrochemical Performances of the Pd-added Ti-V-based Hydrogen Storage Alloys

Modulating Aluminum Solvation with Ionic Liquids for Improved Aqueous-Based Aluminum-Ion Batteries

The Impact of the Cation Acidity on the Interactions in the System Comprising an Ionic Liquid and Palladium Acetate

Designing electrolyte structure to suppress hydrogen evolution reaction in aqueous batteries

Producing High Concentrations of Hydrogen in Palladium via Electrochemical Insertion from Aqueous and Solid Electrolytes

Nanoporous Palladium–Silver Surface Alloys As Efficient and Ph-Universal Catalysts for the Hydrogen Evolution Reaction