Abstract:A cascading failure of landslide dams caused by strong earthquakes or torrential rains in mountainous river valleys can pose great threats to people's lives, properties, and infrastructures. In this study, based on the three-dimensional Reynolds-averaged Navier-Stokes equations (RANS), the renormalization group (RNG) k-ε turbulence model, suspended and bed load transport equations, and the instability discriminant formula of dam breach side slope, and the explicit finite volume method (FVM), a detailed numerical simulation model for calculating the hydro-morphodynamic characteristics of cascading dam breach process has been developed. The developed numerical model can simulate the breach hydrograph and the dam breach morphology evolution during the cascading failure process of landslide dams. A model test of the breaches of two cascading landslide dams has been used as the validation case. The comparison of the calculated and measured results indicates that the breach hydrograph and the breach morphology evolution process of the upstream and downstream dams are generally consistent with each other, and the relative errors of the key breaching parameters, i.e., the peak breach flow and the time to peak of each dam, are less than ±5%. Further, the comparison of the breach hydrographs of the upstream and downstream dams shows that there is an amplification effect of the breach flood on the cascading landslide dam failures. Three key parameters, i.e., the distance between the upstream and the downstream dams, the river channel slope, and the downstream dam height, have been used to study the flood amplification effect. The parameter sensitivity analyses show that the peak breach flow at the downstream dam decreases with increasing distance between the upstream and the downstream dams, and the downstream dam height. Further, the peak breach flow at the downstream dam first increases and then decreases with steepening of the river channel slope. When the flood caused by the upstream dam failure flows to the downstream dam, it can produce a surge wave that overtops and erodes the dam crest, resulting in a lowering of the dam crest elevation. This has an impact on the failure occurrence time and the peak breach flow of the downstream dam. The influence of the surge wave on the downstream dam failure process is related to the volume of water that overtops the dam crest and the erosion characteristics of dam material. Moreover, the cascading failure case of the Xiaogangjian and Lower Xiaogangjian landslide dams has also been used as the representative case for validating the model. In comparisons of the calculated and measured breach hydrographs and final breach morphologies, the relative errors of the key dam breaching parameters are all within ±10%, which verify the rationality of the model is applicable to real-world cases. Overall, the numerical model developed in this study can provide important technical support for the risk assessment and emergency treatment of failures of cascading landslide dams.

Multi-phase flow simulation of landslide dam formation process based on extended coupled DEM-CFD method

Numerical Simulation of Two-Dimensional Dam Failure and Free-Side Deformation Flow Studies

Numerical Simulation on the Longitudinal Breach Process of Landslide Dams Using an Improved Coupled DEM-CFD Method

Numerical Investigation of Silted-Up Dam-Break Flow with Different Silted-Up Sediment Heights

Study on landslide-induced wave disasters using a 3D coupled SPH-DEM method

SPH-based Simulation of Flow Process of a Landslide at Hongao Landfill in China

Numerical modeling of landslide-generated impulse waves in mountain reservoirs using a coupled DEM-SPH method

Physical and numerical modeling of a landslide dam breach and flood routing process

Numerical investigation on the evolution of landslide-induced river blocking using coupled DEM-CFD

Dynamic process of a high-level landslide blocking river event in a deep valley area based on FDEM-SPH coupling approach

Numerical estimation of landslide-generated waves at Kaiding Slopes, Houziyan Reservoir, China, using a coupled DEM-SPH method

River blockage and impulse wave evolution of the Baige landslide in October 2018: Insights from coupled DEM-CFD analyses

Coupled CFD-DEM simulation of submarine landslide movement behavior

An optimized DEM‐SPH model for surge waves induced by riverside landslides

Development of a Coupled DDA–SPH Method and Its Application to Dynamic Simulation of Landslides Involving Solid–Fluid Interaction

Numerical investigation on the evolution process of cascade dam-break flood in the downstream earth-rock dam reservoir area based on coupled CFD-DEM

A novel parameter inversion method for an improved DEM simulation of a river damming process by a large-scale landslide

Numerical investigation of hydro-morphodynamic characteristics of a cascading failure of landslide dams

SPH–DEM Coupling Method Based on GPU and Its Application to the Landslide Tsunami. Part II: Reproduction of the Vajont Landslide Tsunami

A Numerical Study of the Critical Threshold for Landslide Dam Formation Considering Landslide and River Dynamics

Numerical investigation of river blocking process of Gangda paleolandslide at the upstream reaches of the Jinsha River, Tibentan Plateau