Abstract:<p>Rolling element bearings are used as main supports and are key sources of vibrations for aero-engine rotor systems. Mainly including the inner and outer rings, cages, and balls or rollers, the complicated mechanical structures of rolling element bearings exhibit nonlinear behaviors due to the bearing clearance, nonlinear Hertzian contact forces, and defects. Due to imbalanced rotations, which are unavoidable, a wide variety of nonlinear behaviors can be expected in dual-rotor systems. Thus, in this study, we focus on the nonlinear behaviors of a dual-rotor system supported by a rolling element bearing. The nonlinear characteristics, such as the time-varying stiffness and primary resonance behaviors affected by the ball bearing parameters, are discussed. A dual-rotor system supported by a ball bearing was built while considering the nonlinear factors from the 4# ball bearing (at left end of the high-pressure rotor system). The nonlinear governing equations were established using the finite element method. Using the numerical methods, the effects of the bearing clearance on the time-varying stiffness and primary resonance behaviors are analyzed in detail. The results indicate that the mean values of the equivalent stiffness of the system and the rotation speed for forced resonance decrease as the clearance of the ball bearing increases. Periods of "zero-stiffness" occur when <span class="math"><math>Ω1</math></span> (the rotation speed of the high-pressure rotor system) is less than 800 rad/s, and the periods of "zero-stiffness" over one period grow as the bearing clearance is increased. Meanwhile, in the case of a small or even zero clearance of a ball bearing, the amplitude–frequency curves still exhibit "hard characteristics" in the forced resonance domain, and hysteresis and jump resonance occur. All of the results can be used to establish base-line behaviors for system status determination, prediction, and control and to eliminate vibrations.</p>

Nonlinear vibration analysis of multi-support oil-tank system in aero-engine based on asymptotic methods

A General Approach to Tune the Vibration Properties of the Mounting System in the High-Speed and Heavy-Duty Engine

Vibration Analysis of a Nonlinear Rotor-Bearing-seal System

Study on Vibration and Bifurcation of an Aeroengine Rotor System with Elastic Ring Squeeze Film Damper

Nonlinear vibration response of a complex aeroengine under the rubbing fault

Lubrication and stability analysis of nonlinear rotor-bearing system

A New Nonlinear Dynamic Analysis Method of Rotor System Supported by Oil-Film Journal Bearings

Nonlinear Vibration Analysis of the Coupled Gear-Rotor-Bearing Transmission System for a New Energy Vehicle

Nonlinear dynamic modeling and analysis for aviation axial piston pump in center spring return mechanism

Nonlinear Dynamic Analysis Of Rotor-Bearing-Pedestal Systems With Multiple Fit Clearances

Nonlinear Response Analysis for an Aero Engine Dual-Rotor System Coupled by the Inter-Shaft Bearing

A study of analyzing longitudinal dynamic behavior of a double-rod system with longitudinal nonlinear supports

Dynamic Characteristics Analysis of Flexible Rotor System With Pedestal Looseness

Nonlinearity Analyses Of Pneumatic Vibration Isolation System With Simple Harmonic Excitations

Nonlinear Vibration Mitigation of a Rotor-Casing System Subjected to Imbalance–looseness–rub Coupled Fault

Nonlinear response analysis for a dual-rotor system supported by ball bearing

Nonlinear Vibration Analysis of a Low-Pressure Rotor-Bearing System for 200MW Steam Turbine

Nonlinear vibrations of a dual-rotor-bearing-coupling misalignment system with blade-casing rubbing

Nonlinear Dynamics and Stability Analysis of a Multi-Disk Rotor-Bearing System with Flexible Coupling Misalignment

Static Eccentricity Fault of Elastic Ring Squeeze Film Damper for Aeroengine

Modeling strategy and dynamic analysis of a dual-rotor-bearing-casing system in aero-engine