Effect of fiber addition on strength and toughness of rubberized concretes

Sameh Mohamed,Hesham Elemam,Mohamed H. Seleem,Hossam El-Din M. Sallam

DOI: https://doi.org/10.1038/s41598-024-54763-w

IF: 4.6

2024-02-23

Scientific Reports

Abstract:In this paper, an experimental study was conducted to examine the static and dynamic behaviors of rubberized fiber-reinforced concrete (RFRC). Crumb rubber was partially replaced from sand at volume fractions of 0%, 5%, 10%, 15%, and 20%. Steel fibers (SFs) with fiber volume fractions (Vf%) of 0%, 0.5%, 1%, and 1.5% were used for the production of FRCs, while polypropylene fiber (PPF) with Vf% = 0.4% was adopted to produce others FRCs. A combination of 0.4% PPF and 1% SF was used for hybrid FRC. The static properties were evaluated through compression, indirect tension, and flexural tests. However, the drop weight impact test was conducted to assess the dynamic property by estimating the impact energy. It was observed that the replacement of sand with rubber reduced all mechanical properties of concrete. In the case of RFRC, a reduction in compressive strength, compared to samples without fibers, was noted, and this reduction increased with higher Vf%. Both toughness indices and fracture energy were affected slightly by increasing rubber percentages while markedly increased with higher Vf%. However, adding rubber and/or fibers enhanced the impact energy of concrete.

multidisciplinary sciences

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the influence of adding steel fibers (SF) and polypropylene fibers (PPF) on the static and dynamic properties of rubber - reinforced concrete (RFRC) when rubber particles partially replace fine aggregates. Specifically, the research aims to:

1. **Evaluate the influence of rubber particles on the mechanical properties of concrete**: By replacing different proportions (0%, 5%, 15%, 25%) of fine aggregates with rubber particles, study their influence on the compressive strength, splitting tensile strength and flexural strength of concrete.

2. **Explore the improvement effect of steel fibers and polypropylene fibers on the properties of rubber - reinforced concrete**: Add steel fibers with different volume fractions (0.5%, 1%, 1.5%) and 0.4% polypropylene fibers to the concrete containing different proportions of rubber particles, and study the improvement effect of these fibers on the mechanical properties of concrete.

3. **Analyze the comprehensive influence of hybrid fibers (combination of steel fibers and polypropylene fibers) on the properties of concrete**: Discuss the synergy effect of using steel fibers and polypropylene fibers simultaneously on the compressive strength, splitting tensile strength and flexural strength of concrete.

4. **Evaluate the dynamic properties**: Through the drop - hammer impact test, study the impact energy absorption capacity of rubber - reinforced concrete after adding fibers.

The paper systematically studies the influence of these factors on the properties of concrete through experimental methods, aiming to provide scientific basis and technical support for the application of rubber - reinforced concrete in practical engineering.