Abstract:With a high proportion of distributed photovoltaic generation connected to a distribution network, reverse power flow might occur, and node voltages might be out of limit. Therefore, determining a distribution system's maximum acceptance capacity for distributed photovoltaics is crucial. Many existing studies widely agree that distributed photovoltaics possess the ability to increase voltage when connected at the end of the supply line within the distribution system. However, the impact of different types of loads on the carrying capability of distributed photovoltaic integration was not considered during these computations, which affects their accuracy in determining the maximum penetration capacity of a distributed photovoltaic network. Therefore, this paper investigates the acceptance capability of distribution networks with different types of loads on distributed photovoltaics. First, the static voltage characteristics and power factor variation characteristics of different load components were analyzed, so then, the setting method of active and reactive power were clarified based on the changes in the load power in a day. Next, the IEEE 33 node system is taken as an example. From the perspective of whether the voltage of the distribution system nodes is in excess of the system limit, the acceptance capability of different types of loads to carry distributed photovoltaics was analyzed. The simulation results show that the heavy industrial load has the greatest ability to accept distributed photovoltaics, followed by the light industrial load, and that residential load has the smallest capacity. From the simulation results, we conclude that the greater the high-power time period of the load overlaps with the high-power time period of distributed photovoltaics is, the stronger its ability to accept distributed photovoltaics.

Distributed generation admittance capacity calculation of distribution network based on multi-scenario analysis and active management

Acceptance Capability of Distributed Photovoltaic Generation in Distribution Networks Considering Different Loads

A Probabilistic Method for Determining Grid-Accommodable Wind Power Capacity Based on Multiscenario System Operation Simulation.

Calculation of the carrying capacity of distributed power generation in distribution network under carbon peaking and carbon neutrality goals

A multi-time scale energy management method for active distribution networks with multiple terminal soft open point

Calculation of Distribution Network PV Hosting Capacity Considering Source–Load Uncertainty and Active Management

Robust Capacity Assessment of Distributed Generation in Unbalanced Distribution Networks Incorporating ANM Techniques

Scenario-based Planning of Active Distribution Systems under Uncertainties of Renewable Generation and Electricity Demand

Evaluating Connectable Capacity of Distributed Wind Generation in Distribution Networks Through a Bayesian Integrated Optimization Method

Distributed Generation Capacity Planning Method of AC/DC Hybrid Distribution Network Based on Different Functions of Energy Storage

Research on Distributed Energy Planning Method of Active Distribution Network based on Load Forecasting

Dynamic Hosting Capacity Evaluation of DGs in Active Distribution Network

Assessment of Distribution Network Planning Based on Dynamic Weighted Particle Swarm Algorithm with Distributed Generation and Energy Storage

Robust Assessment of Hosting Capacity of Renewable Generation in Distribution Systems Considering the Active Network Management

Energy management strategy of active distribution network with integrated distributed wind power and smart buildings

Active power optimisation scheduling method for large-scale urban distribution networks with distributed photovoltaics considering the regulating capacity of the main network

Power and Energy Balance of Active Distribution Network Considering Operation-Control Strategy

Optimization method of distribution network energy storage and capacity planning considering uncertainty of new energy sources

Economic Scheduling Model of an Active Distribution Network Based on Chaotic Particle Swarm Optimization

Coordinated Allocation of Distributed Generation, Capacitor Banks and Soft Open Points in Active Distribution Networks Considering Dispatching Results

Calculation Method for Maximum Accommodation Capacity of Distributed Photovoltaic in Distribution Network Considering Various Electrical Constraints