Abstract:In this work, we report on five different Metal Organic frameworks (MOFs) materials synthesized from Polyethylene terephthalate (PET) waste as a direct precursor for 1,4-benzenedicarboxylic acid (1,4-H 2 BDC), a large component in BDC-based MOFs for water adsorption processes. These materials were characterized by physicochemical techniques including surface area analyser, Powder X-Ray diffraction, scanning electron microscopy and thermogravimetric analyser. The high surface areas obtained from N 2 adsorption indicated the successful synthesis and utilization of the BDC from PET waste material. The diffraction patterns of all materials were characterized by major peaks present in the materials. The morphology of the different MOFs was distinct and showed the presence of elements on the surface of all materials. Thermogravimetric analysis indicated the weight loss (%) in the samples at different stages. Adsorption isotherms were measured using dynamic vapor sorption analyzer (DVS) at 25 and 55 °C. MIL-101(Cr) superseded all other MOF materials at 55 °C with water uptake of 1.53 g H2 o/g ads at a relative pressure of 0.99, followed by 1.15 g H2 o/g ads at p/p0 = 0.9 for UiO-66(Zr), 0.78 g H2 o/g ads at p/p0 = 0.9 for MIL-101(Fe) and 0.77 g H2 o/g ads at p/p0 = 0.95 for MIL-88B(Fe). Aluminium fumarate presented the lowest water uptake (0.52 g H2 o/g ads at a relative pressure of 0.96). MOFs were exposed to 24 successive adsorption/desorption cycles. MIL-101(Cr) exhibited better hydrothermal stability and fast adsorption kinetics compared to other four materials. The Dubinin-Astakhov and LDF were used to model the measured adsorption characteristics and the results showed that the model prediction of the experimental data with a mean relative deviation of 6%. Heat storage capacities were measured by TG-DSC and all MOFs presented an increase in capacities at higher temperature (55 °C). The results showed that higher surface area and high temperature range measurements yields high water uptake and heat storage capacities for heat storage applications.

Characterizing mesoporosity in MOFs: a thermoporometry approach

Thermoporometry of mesoporous carbons: Application of octamethylcyclotetrasiloxane as probe liquid for small mesopores

MOF‐Based Hierarchically Porous Monoliths Prepared Via High Internal Phase Emulsion Template: Morphology, Thermal Stability, Mechanical Property, and MOF Accessibility

Synthesis, Morphology Control, and Properties of Porous Metal–organic Coordination Polymers

Cross-Polarization Solid-State NMR Quantification of Species within Pores of Metal-Organic Frameworks: A Case Study of α-Mg3(HCOO)6

Comparison of water and benzene as probe liquids in thermoporometry of mesoporous carbons

Porous MOFs with geometric mismatch between trimers and octatopic pyrene-based ligands for low-temperature methane storage

Direct Observation Of The Mesopores In Zsm-5 Zeolites With Hierarchical Porous Structures By Laser-Hyperpolarized Xe-129 Nmr

Unusual Pore Volume Dependence of Water Sorption in Monolithic Metal-Organic Framework

Pore Structure Compartmentalization for Advanced Characterization of Metal-Organic Framework Materials

The thermal conductivity properties of porous materials based on TPMS

Simultaneous Thermogravimetry-Differential Scanning Calorimetry (TG-DSC) in Nanoporous Materials: Examples of Data for Zeolites, Metal–Organic Frameworks (MOFs), Clay Based and Mesostructured Solids

Melting of aqueous NaCl solutions in porous materials: shifted phase transition distribution (SIDI) approach for determining NMR cryoporometry pore size distributions

Underlying Polar and Nonpolar Modification MOF-Based Factors that Influence Permanent Porosity in Porous Liquids

Textural Characterization by Using an Alternative Langmuir Isotherm and a New Thickness Function

Anisotropic Thermal Conductivity Enhancement of the Aligned Metal-Organic Framework under Water Vapor Adsorption

The Use of Thermoporometry in the Study of Frost Resistance of Rocks

Water sorption studies with mesoporous multivariate monoliths based on UiO-66

Revisiting Metal-Organic Frameworks Porosimetry by Positron Annihilation: Metal Ion States and Positronium Parameters

Regulation of Porosity in MOFs: A Review on Tunable Scaffolds and Related Effects and Advances in Different Applications

Evaluation of PET-derived metal organic frameworks (MOFs) for water adsorption and heat storage