Abstract:Hydrogen has gained increasing attention recently as an alternative energy carrier leading towards a sustainable hydrogen economy [1]. Green hydrogen has less pollution (water as the only byproduct) and higher energy density than its counterpart fossil fuels. Additionally, it has much higher refueling speed than lithium-ion batteries, which makes it’s more suitable for mobility applications. Proton exchange membrane (PEM) water electrolysis is one of the most popular approaches for green hydrogen generation due to its high efficiency and high differential pressure operation capability [2]. The membrane electrode assembly (MEA) is the core of a PEM electrolyzer in which water molecules are spilt into hydrogen and oxygen molecules. In this overview, the challenges and paths regarding the MEA materials, operation/diagnosis/maintenance, and final recycling will be discussed. An electrolyzer MEA contains an anode and cathode made of platinum group metal (PGM) catalysts, a perfluorosulfonic acid (PFSA) membrane, and other gasketing materials. PGM catalysts are a major source of the cost of the PEM electrolyzer stack. Ir black based catalysts have been used for decades in the PEM electrolyzer industry. Due to the high cost and scarcity of Ir, efforts have been dedicated to reducing the catalyst loading and developing highly active catalysts [3]. The membrane is another major component of a PEM electrolyzer. 5 mil and 7 mil thick membranes have been used in electrolyzer industries. However, the ionic resistive losses of these relatively thick PEMs significantly reduce the efficiency of the MEA. Hence, reducing membrane thickness has been a central topic for PEM electrolyzer membrane development. With the progressive thinning of the PEM, the hydrogen gas crossover will become significant, which will compromise the safe operation of a PEM electrolyzer system. An effective gas recombination layer in the PEM is therefore urgently needed to mitigate the resulting higher hydrogen crossover. Additionally, the mechanical stresses imposed due to operation at high differential pressure operation (up to 40 bar) increases the attractiveness of a reinforcement layer. The unique properties of the membrane and catalysts in an MEA also require ultra-pure feed water. However, this cannot always be guaranteed. Metal ions will leach out from system plumbing and the DI system can’t always effectively remove all ions from tap water. The contamination will also poison the catalysts in an MEA. It is therefore critical to establish a universal method to efficiently identify the issue and recover the MEA performance. It is expected that the MEA can last 60k to 90k hours [4]. Though functionality may be compromised at the this point, the value in the PGM catalysts, and to a lesser extent membrane, and other carbon-based materials [5] remains. MEA recycling thus needs to be considered at the very early stage of the large-scale PEM electrolyzer application. Tradition calcination approaches for catalyst refinery is not optimized for PEM MEAs due to the presence of the PFSA membrane. The burning of MEAs will not only waste costly PFSA material but also poses a threat to the environment due to carbon and fluoride emissions. Current research efforts have focused on catalyst recycling and reuse/repurpose of PFSA based materials. [1] Oliveira, A. M., Beswick, R. R. & Yan, Y. A green hydrogen economy for a renewable energy society. Current Opinion in Chemical Engineering 33 , 100701 (2021). [2] Ayers, K. et al. Perspectives on low-temperature electrolysis and potential for renewable hydrogen at scale. Annual review of chemical and biomolecular engineering 10 (2019). [3] Mittelsteadt, C. (Invited) Ir Strangelove: Or How I Learned to Stop Worrying and Embrace the PEM. ECS Meeting Abstracts MA2022-01 , 1335-1335 (2022). [4] Schmidt, O., Future cost and performance of water electrolysis: an expert elicitation study. International journal of hydrogen energy 42 (2017), 30470-30492. [5] Sverdrup, H. U. & Ragnarsdottir, K. V. A system dynamics model for platinum group metal supply, market price, depletion of extractable amounts, ore grade, recycling and stocks-in-use. Resources, Conservation and Recycling 114 , 130-152 (2016)

An ink-free integrated dual electrode assembly for economical proton electrolyzer membrane water electrolysis at ultrahigh current densities

(Invited) Progress and Perspective Towards Low-Cost High-Performance Anion Exchange Membrane Water Electrolysis

(Digital Presentation) Large–Scale High-Performance Low Catalyst Loaded Membrane Electrode Assemblies for Advanced Proton Exchange Membrane Water Electrolyzers

Comprehensive study and optimization of membrane electrode assembly structural composition in proton exchange membrane water electrolyzer

A brief introduction of electrode fabrication for proton exchange membrane water electrolyzers

Development of Cathode Ordered Membrane Electrode Assembly Based on TiO2 Nanowire Array and Ultrasonic Spraying

High Performance Anion Exchange Membrane Electrolysis Using Plasma-Sprayed, Non-Precious-Metal Electrodes

One‐Step Fabrication of Ultralow Pt Loading High Efficiency Proton Exchange Membrane for Water Electrolysis by Conventional E‐Beam Metal Deposition

(Invited) Novel Design of Low-Loaded Membrane Electrode Assemblies for Advanced Low-Temperature Water Electrolyzers

All-in-one bipolar electrode: A new concept for compact and efficient water electrolyzers

Optimizing Ionomer Distribution in Anode Catalyst Layer for Stable Proton Exchange Membrane Water Electrolysis

Catalyst-coated proton exchange membrane for hydrogen production with high pressure water electrolysis

Ordered Membrane Electrode Assembly with Drastically Enhanced Proton and Mass Transport for Proton Exchange Membrane Water Electrolysis

A cost-effective and highly efficient dissymmetric membrane electrode assembly designed for fuel cells

Pathways Toward Efficient and Durable Anion Exchange Membrane Water Electrolyzers Enabled By Electro‐Active Porous Transport Layers

Designing Membrane Electrode Assembly for Weakly Humidity-Dependent Proton Exchange Membrane Fuel Cells

A novel PEMEC with 3D printed non-conductive bipolar plate for low-cost hydrogen production from water electrolysis

Highly Porous Iridium Thin Electrodes with Low Loading and Improved Reaction Kinetics for Hydrogen Generation in PEM Electrolyzer Cells

Ionomer-free and recyclable porous-transport electrode for high-performing proton-exchange-membrane water electrolysis

Novel thin/tunable gas diffusion electrodes with ultra-low catalyst loading for hydrogen evolution reactions in proton exchange membrane electrolyzer cells

(Invited) MEA Technologies for PEM Electrolyzers: Overview and Perspectives