Bonding wood with uncondensed lignins as adhesives

Guangxu Yang,Zhenggang Gong,Xiaolin Luo,Lihui Chen,Li Shuai

DOI: https://doi.org/10.1038/s41586-023-06507-5

IF: 64.8

2023-08-09

Nature

Abstract:Plywood is widely used in construction such as for flooring and interior walls, as well as in the manufacture of household items such as furniture and cabinets. Such items are made of wood veneers that are bonded together with adhesives such as urea-formaldehyde (UF) and phenol-formaldehyde (PF) resins 1,2 . Researchers in academia and industry have long aimed to synthesize lignin-phenol-formaldehyde (LPF) resin adhesives using biomass-derived lignin, a phenolic polymer that can be used to substitute the petroleum-derived phenol 3-6 . However, LPF resin adhesives are less attractive to plywood manufacturers than UF and PF resins due to their appearance and cost. Here we report a simple and practical strategy for preparing lignin-based wood adhesives from lignocellulosic biomass. Our strategy involves separation of uncondensed or slightly condensed lignins from biomass followed by directly applying a suspension of the lignin and water as an adhesive on wood veneers. Plywood products with superior performances could be prepared with such lignin adhesives at a wide range of hot-pressing temperatures, enabling the adhesives highly promising alternatives to traditional wood adhesives in different market segments. Mechanistic studies indicate that the adhesion mechanism of such lignin adhesives may involve softening of lignin by water, filling of vessels with softened lignin, and crosslinking of lignins in adhesives with those in cell wall.

multidisciplinary sciences

What problem does this paper attempt to address?

The paper mainly addresses the following issues:

### Research Background and Objectives

- **Problems with Traditional Wood Adhesives**: Currently widely used urea-formaldehyde resin (UF) and phenol-formaldehyde resin (PF) have excellent performance but pose problems such as environmental pollution, cost, and health risks.
- **Development Needs for Biomass-Based Adhesives**: To replace traditional petroleum-based adhesives, researchers have been committed to developing biomass-based adhesives, especially using lignin (a natural polymer that can be extracted from plants).

### Solution

- **Uncondensed or Slightly Condensed Lignin as Adhesive**: Researchers proposed a simple and practical method, which involves separating uncondensed or slightly condensed lignin from biomass and directly suspending it in water to be used as a wood adhesive.
- **Self-Crosslinking Mechanism During Hot Pressing**: Through the hot pressing process, lignin can soften, fill the voids in wood cells, and undergo self-crosslinking reactions within the cell walls, thereby achieving good adhesive effects.

### Main Findings

- **Performance of Lignin from Different Sources and Treatment Conditions**: Researchers tested various lignins (such as milled wood lignin, formaldehyde-protected lignin, etc.) and controlled the degree of lignin condensation by adjusting extraction conditions (such as temperature, time, etc.).
- **Optimal Performance Conditions**: The results showed that by appropriately adjusting the formaldehyde load and other extraction conditions, lignin adhesives with excellent adhesive performance could be obtained, with performance comparable to or even better than traditional UF and PF resins.
- **Application Prospects**: This new type of lignin adhesive is not only environmentally friendly but also cost-effective, showing great application potential in multi-layer plywood and other pressed wood products (such as particleboard and fiberboard).

In summary, the main contribution of this paper is the proposal of a new method using uncondensed or slightly condensed lignin as a wood adhesive and the validation of the feasibility and advantages of this method in practical applications.