Abstract:Because of the increasingly deteriorating quality of petroleum coke raw materials, abnormal furnace conditions, such as "firing and blasting", frequently arise during the calcination of petroleum coke with a high powder/coke ratio in a vertical shaft calciner. This poses an urgent technical challenge that needs to be addressed. In iron and steel metallurgy, the burden distribution system is an important way to regulate blast furnace conditions and improve the permeability of a particle packed bed. In this work, advanced burden distribution concepts were introduced into the calcination process of petroleum coke in a vertical shaft calciner. Experimental devices were established to determine the resistance characteristics of a petroleum coke particle packed bed, along with a cold physical model of a 1/8 scale vertical shaft calciner. The influence of particle size and burden distribution methods on the resistance characteristics and particle motion behavior of the petroleum coke particle packed bed was systematically studied. The research findings indicate that both particle size and burden distribution methods significantly impact the resistance characteristics of petroleum coke particle packed beds. The smaller the particle size, the poorer the permeability of the bed. The layered burden distribution, symmetrical burden distribution, and dual‐particle mixed conventional burden distribution all contribute to improving the permeability of the petroleum coke particle packed bed in the vertical shaft calciner. Furthermore, employing symmetrical burden distribution in Bed‐3, which is packed with petroleum coke particles of diameters −3.2 + 2.5 mm and −1.0 + 0.8 mm, results in the smallest unit pressure drop, at only 1.7% of that of the conventional burden distribution of unscreened raw materials. This is the most effective means of improving the permeability of the bed. During the discharging process, particle size and symmetrical burden distribution have no significant impact on the motion characteristics of petroleum coke particles in the vertical shaft calciner. In general, in the calciner area, particles primarily move in a plug flow pattern and gradually transform into funnel flow in the cooling water jacket area. These research results provide the theoretical basis for addressing the technical challenges associated with powder coke calcination in vertical shaft calciners through reasonable burden distribution methods for fine and coarse particles.

Effect of the coke particle size distribution on the burden layer porosity of blast furnace

CFD-DEM Study on the Synergistic Effect of Coke Consumption and Particle Dynamics in the Blast Furnace Raceway

The Influence of Central Coke Charging Mode on the Burden Surface Shape and Distribution of a Blast Furnace

Interface Wetting Behavior Between Iron and Coke During the Carbon Dissolution Process in a Blast Furnace

Resistance characteristics and particle movement behavior of a petroleum coke particle packed bed in a vertical shaft calciner under different burden distribution methods

Study on the High-Temperature Interaction between Coke and Iron Ores with Different Layer Thicknesses

Numerical simulation of coke collapse and its optimization during burden charging at the top of bell-less blast furnace

Measurement and Simulation Validation of DEM Parameters of Pellet, Sinter and Coke Particles

Relationship and Mechanism Analysis of Soft-Melt Dropping Properties and Primary-Slag Formation Behaviors of the Mixed Burden in Increasing Lump Ore Ratio

Effects of pellet ratio on the burden movement and distribution characteristics in the BF throat

Particle Size Segregation during Charging and Discharging Processes in Bell‐Less Blast Furnace with Serial‐Type Hoppers

Numerical simulation of the effect of burden profile on gas flow in a COREX shaft furnace

Influence of Central Coke Ratio on the Internal State of Blast Furnace

Research on the Factors Affecting the Formation of Ore-Free Zone at Blast Furnace Throat Based on DEM

A Comparative Study of the Performance of Different Particle Models in Simulating Particle Charging and Burden Distribution in a Blast Furnace Within the DEM Framework

The evolution of pore structure during coke graphitization process in the blast furnace hearth

DEM simulation of powder phase movement in coke packed bed generated by scanning particles of a blast furnace

Central Coke Charging and Its Effect on Coke Collapse at the Throat of Blast Furnace by DEM Simulation

Performance influence study on blast furnace raw materials by zinc and pb

Reliability Study of Super-Ellipsoid DEM in Representing the Packing Structure of Blast Furnace

Evolution of Coke Microstructure and Metallurgical Properties During Graphitization in a Blast Furnace