Abstract:The crack fault has an important influence on the vibration characteristics of the transmission system. This paper is devoted to analyzing fault mechanism and dynamic characteristics of transmission with gear crack, which provides the basis for crack diagnosis and monitoring of helical gear in two-stage transmission system. For this purpose, an improved calculation method of time-varying meshing stiffness with crack fault is proposed considering the axial force of the helical gear. The influence of crack depths and angles on stiffness is analyzed. Based on this, the dynamic model of the two-stage helical gear transmission system is established using the lumped mass method. The influence of crack parameters on the characteristics of the transmission system is studied. In order to better diagnose the crack fault of the helical gear, the statistical index in time domain is calculated and the sensitivity to crack fault is analyzed. It is shown that the stiffness decreases by 25%, and the vibration acceleration increases by 8.3% after the axial force component is considered into the stiffness of the crack gear pair. The meshing stiffness decreases with the increase of crack depths and crack angles. The dynamic model is verified by rig test. Periodic impact exists in the system. The time of entering meshing of the cracked tooth and the time of complete disengagement is observed in the residual signal. In the frequency domain, there appear sidebands on the mesh frequency of the first gear pairs and its harmonics, the second gear mesh frequency and its harmonic frequencies. There is a little influence on the vibration acceleration of the driven gear of the second-stage. According to the signals in the frequency domain and the time domain, we can tell at which stage the gear is cracked. While through the time required for the crack tooth from engagement to disengagement completely, we can tell which gear is cracked. The sensitivity of skewness, impulse factor and kurtosis to crack fault decreases successively. The results provide theoretical basis for crack fault diagnosis of a two-stage helical gear transmission system.

A temperature rise calculation model of wind turbine gearbox gear considering crack fault and tooth number difference

Nonlinear Dynamic Characteristics of Wind Turbine Gear System Caused by Tooth Crack Fault

Investigation of tooth crack opening state on time varying meshing stiffness and dynamic response of spur gear pair

Nonlinear dynamic analysis of high-speed gear pair with wear fault and tooth contact temperature for a wind turbine gearbox

Vibration Analysis of Two-Stage Helical Gear Transmission with Cracked Fault Based on an Improved Mesh Stiffness Model

Improved analytical model for mesh stiffness calculation of cracked helical gear considering interactions between neighboring teeth

Research on load sharing performance of wind turbine gearbox involving multiple-errors and tooth crack

Influence of Tooth Pitting and Cracking on Gear Meshing Stiffness and Dynamic Response of Wind Turbine Gearbox

An improved time-varying mesh stiffness algorithm and dynamic modeling of gear-rotor system with tooth root crack

Mesh stiffness calculation and vibration analysis of the spur gear pair with tooth crack, considering the misalignment between the base and root circles

Dynamic Characteristics of Spur Gear System with Tooth Root Crack Considering Gearbox Flexibility

Time-varying Mesh Stiffness Algorithm Correction and Tooth Crack Dynamic Modeling

A methodology for reliability assessment and prognosis of bearing axial cracking in wind turbine gearboxes

Mesh Stiffness Modeling and Dynamic Simulation of Spur Gears with Body Crack under Speed Fluctuation Condition

Influences of Tooth Crack On Dynamic Characteristics of a Multi-Stage Gear Transmission System Considering the Flash Temperature

Resultant Vibration Signal Model Based Fault Diagnosis of a Single Stage Planetary Gear Train with an Incipient Tooth Crack on the Sun Gear

Research on the time-varying mesh stiffness method and dynamic analysis of cracked spur gear system considering the crack position

Dynamic modelling and analysis of cracked gear system with tip relief based on proposed variable-angle deformation energy integration method

Mesh stiffness modelling and dynamic simulation of helical gears with tooth crack propagation

Analytical models of mesh stiffness for cracked spur gears considering gear body deflection and dynamic simulation

Dynamic Analysis of Planetary Gear with Root Crack in Sun Gear Based on Improved Time-Varying Mesh Stiffness