Abstract:Additive manufacturing (AM) is a powerful emerging technology for fabrication of components with complex geometries using a variety of materials. However, despite promising potential, due to the complexity of the process dynamics, how to ensure product quality and consistency of AM parts efficiently during the process still remains challenging. Therefore, the objective of this dissertation is to develop effective methodologies for online automatic quality monitoring and improvement, i.e., to build a basis for smart additive manufacturing. The fast-growing sensor technology can easily generate a massive amount of real-time process data, which provides excellent opportunities to address the barriers of online quality assurance in AM through data-driven perspectives. Although this direction is very promising, the online sensing data typically have high dimensionality and complex inherent structure, which causes the tasks of real-time data-driven analytics and decision-making to be very challenging. To address these challenges, multiple data-driven approaches have been developed in this dissertation to achieve effective feature extraction, process modeling, and closed-loop quality control. These methods are successfully validated by a typical AM process, namely, fused filament fabrication (FFF). Specifically, four new methodologies are proposed and developed as listed below, (1) To capture the variation of hidden patterns in sensor signals, a feature extraction approach based on spectral graph theory is developed for defect detection in online quality monitoring of AM. The most informative feature is extracted and integrated with a statistical control chart, which can effectively detect the anomalies caused by cyber-physical attack. (2) To understand the underlying structure of high dimensional sensor data, an effective dimension reduction method based on an integrated manifold learning approach termed multi-kernel metric learning embedded isometric feature mapping (MKML-ISOMAP) is proposed for online process monitoring and defect diagnosis of AM. Based on the proposed method, process defects can be accurately identified by supervised classification algorithms. (3) To quantify the layer-wise quality correlation in AM by taking into consideration of reheating effects, a novel bilateral time series modeling approach termed extended autoregressive (EAR) model is proposed, which successfully correlates the quality characteristics of the current layer with not only past but also future layers. The resulting model is able to online predict the defects in a layer-wise manner. (4) To achieve online defect mitigation for AM process, a closed-loop quality control system is implemented using an image analysis-based proportional-integral-derivative (PID) controller, which can mitigate the defects by adaptively adjusting machine parameters during the printing process in a timely manner. By fully utilizing the online sensor data with innovative data analytics and closed-loop control approaches, the above-proposed methodologies are expected to have excellent performance in online quality assurance for AM. In addition, these methodologies are inherently integrated into a generic framework. Thus, they can be easily transformed for applications in other advanced manufacturing processes. Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control

In-situ process evaluation for continuous fiber composite additive manufacturing using multisensing and correlation analysis

Autonomous intelligent additive manufacturing of continuous fiber-reinforced composites: data-enhanced knowledgebase and multi-sensor fusion

Experimental Study of the Process Failure Diagnosis in Additive Manufacturing Based on Acoustic Emission

Deep learning-assisted real-time defect detection and closed-loop adjustment for additive manufacturing of continuous fiber-reinforced polymer composites

A New Approach for Online Monitoring of Additive Manufacturing Based on Acoustic Emission

Machine Learning and Materials Informatics Approaches for Predicting Transverse Mechanical Properties of Unidirectional CFRP Composites with Microvoids

Real-time in-situ process monitoring method based on the self-conductivity of carbon fiber prepreg for automated fiber placement (AFP)

In situ repairing of continuous fiber-reinforced thermoplastic composite via multi-axial additive manufacturing

Online Quality Monitoring in Material Extrusion Additive Manufacturing Processes Based on Laser Scanning Technology

Predicting Laser Powder Bed Fusion Defects Through In-Process Monitoring Data and Machine Learning

Multi-modal sensor fusion with machine learning for data-driven process monitoring for additive manufacturing

In-situ process monitoring and adaptive quality enhancement in laser additive manufacturing: a critical review

Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control

A CNN-Based Adaptive Surface Monitoring System for Fused Deposition Modeling

Multisensor fusion-based digital twin in additive manufacturing for in-situ quality monitoring and defect correction

In-situ defect detection in laser-directed energy deposition with machine learning and multi-sensor fusion

Detecting Multi-Scale Defects in Material Extrusion Additive Manufacturing of Fiber-Reinforced Thermoplastic Composites: A Review of Challenges and Advanced Non-Destructive Testing Techniques

A feature-level multi-sensor fusion approach for in-situ quality monitoring of selective laser melting

A Preliminary Study Of In-Situ Defects Measurement For Additive Manufacturing Based On Multi-Spectrum

In-Situ Laser-Based Process Monitoring and In-Plane Surface Anomaly Identification for Additive Manufacturing Using Point Cloud and Machine Learning

In-situ visual monitoring for multi-scale defects detection in laser powder bed fusion