Abstract:Water electrolyzers, such as proton exchange membrane water electrolyzers (PEM) and anion exchange membrane water electrolyzers (AEM) are important technologies for sustainable electrochemical energy conversion. The oxygen evolution reaction (OER) at the anode is a pivotal half-reaction in these systems. Despite substantial progress over the years, OER kinetics remain a major source of inefficiency in these devices, necessitating the development of stable catalysts. Currently, precious metal-based catalysts dominate the landscape of OER catalysts for these devices. As non-precious alternatives, nickel-iron (Ni/Fe) catalysts have emerged as particularly promising in alkaline conditions. However, they exhibit dynamic behavior during electrocatalysis—for instance, oxidizing to an active oxyhydroxide phase during the OER. This dynamic nature makes it challenging to establish clear structure-activity-stability relationships. Incorporating cobalt (Co) into the catalyst composition has been found to influence the activity and material conversion of mixed Ni-Fe-Co oxides and (oxy)hydroxides. Methods for rationally activating and stabilizing Ni-Fe-based catalysts via electrochemical and chemical (e.g. composition) routes are necessary for enhancing scalability and accessibility in hydrogen production devices. Herein, our goal is to understand and exploit activation protocols to enhance the OER performance of as-synthesized nickel-iron-cobalt metal thin films, addressing three primary objectives: synthesizing and characterizing homogeneous metal catalysts, investigating the impact of different potential ranges and scan rates on catalyst oxidation and surface conversion from the metal, and assessing how the addition of cobalt influences conversion rates and current density of the catalyst. We use cyclic voltammetry to facilitate and disentangle conversion (integrated reductive peak for Ni and/or Co 2+ → 3+ transition) and OER performance (current density (mA cm -2 ) at η = 350 mV). For all compositions tested of (Ni 80 Fe 20 ) 100-x Co x , x = 0 - 5 % we observe that the most effective conversion requires both redox and oxygen evolution. To further investigate the relationship between conversion and performance catalysts were tested in varying electrolytes such as 1M KOH, 0.1M KOH, and an ionomer overlayer to understand how these impacted conversion. Subsequently, post-analysis techniques such as X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma mass spectrometry optical emission spectroscopy (ICP-OES) were conducted to gain insights into the surface composition and elemental distribution of the catalysts following potential cycling. Additionally, electrochemical mass spectrometry (EC-MS) was employed to quantify the faradaic efficiency of oxygen, providing an understanding of at what point the catalyst begins converting and how much of the OER current is directed towards OER versus metal conversion. This project advances the fundamental understanding of NiFeCo catalyst conversion, shedding light on the critical role of catalyst composition and investigating the conditions that foster optimal conversion efficiency. The use of physical vapor deposition for thin film catalysts offers distinct advantages, making deposition and scaling processes facile. This capability, coupled with the gained insights into conversion dynamics, sets the stage for in situ optimization of the surface to achieve the active oxyhydroxide phase with the highest performance for AEM water electrolysis.

The Effect of Iron Impurities on Transition Metal Catalysts for the Oxygen Evolution Reaction in Alkaline Environment: Activity Mediators or Active Sites?

The Effect of Iron Impurities on Transition Metal Catalysts for the Oxygen Evolution Reaction in Alkaline Environment: Activity Mediators or Active Sites?

Effects of Fe Electrolyte Impurities on Ni(OH)2/NiOOH Structure and Oxygen Evolution Activity

Exploring the role of iron in Fe5Ni4S8 toward oxygen evolution through modulation of electronic orbital occupancy

Ni modified Fe3O4(001) surface as a simple model system for understanding the Oxygen Evolution Reaction

Effect of α-FeOOH in KOH Electrolytes on the Activity of NiO Electrodes in Alkaline Water Electrolysis for the Oxygen Evolution Reaction

Fe (oxy)hydroxide Oxygen Evolution Reaction Electrocatalysis: Intrinsic Activity and the Roles of Electrical Conductivity, Substrate, and Dissolution

Effect of Iron Doping in Ordered Nickel Oxide Thin Film Catalyst for the Oxygen Evolution Reaction

Multiple Reaction Pathways for Oxygen Evolution as Key Factor for the Catalytic Activity of Nickel-Iron (Oxy)Hydroxides

Active oxygen species mediate the iron-promoting electrocatalysis of oxygen evolution reaction on metal oxyhydroxides

Composition-Dependent Dynamics of Nickel-Iron-Cobalt Metal Catalysts for Oxygen Evolution Reaction

(Invited) Metal Oxide Nanoparticles for Stable Alkaline Oxygen Evolution Reaction in an Anion Exchange Membrane Electrolyser Cell

The Influence of Metal Impurities on NiOOH Electrocatalytic Activity in the Oxygen Evolution Reaction

Intrinsic Activity Modulation and Structural Design of NiFe Alloy Catalysts for an Efficient Oxygen Evolution Reaction

Activity and Stability of Iron-Based Spinel Oxides for Oxygen Evolution Reaction

Elucidating the Influence of Intercalated Anions in NiFe LDH on the Electrocatalytic Behavior of OER: A Kinetic Study

Toward Finding the Role of Surface Iron Ions in Enhancing Oxygen-Evolution Reaction

Electroactive heterojunctions of iron-based compounds in oxygen evolution reaction – insight into synergy and mechanism

Ternary Ni-Co-Fe oxyhydroxide oxygen evolution catalysts: Intrinsic activity trends, electrical conductivity, and electronic band structure

The Effect of Fe Dopant Location in Co(Fe)OOHx Nanoparticles for the Oxygen Evolution Reaction

The Role of Aluminum in Promoting Ni–Fe–OOH Electrocatalysts for the Oxygen Evolution Reaction