Abstract:The modeling of ground vibration from trains requires a Green's function to represent the dynamic characteristics of the ground. Because of the existence of groundwater, dynamic coupling vibration of soil skeleton and pore water may propagate in a naturally stratified ground. This paper proposes a semi-analytical Green's function that is able to model the fluid-solid coupling in saturated soil, stratification of ground configuration and three-dimensional propagation of waves. The Biot's equation was Fourier transformed with respect to time and two horizontal cartesian components. General solutions of displacements and stresses of solid skeleton and pore fluid were worked out in the Fourier transformed domain. The relationship between displacement and stress on the ground surface was formulated by the transfer matrix technique, so that the matrix of the Green's function was derived. Improvements of computational efficiency for vertical displacement were achieved by taking advantage of some relevant matrices' properties. The proposed Green's function was added into a sophisticated train-track-ground interaction model to include the ground water effect. Validation of the Green's function was shown by computing several typical examples in the literature and simulating a field observation near the Beijing urban railway. Vibrations of two typical layered grounds with saturated clay and sandy soil, excited by low speed and high speed trains, respectively, were analyzed based on computation results. The calculated amplitudes of ground vibrations were very close to those of some references, in both cases of a harmonic load with a fixed position and a moving load. For the field test in Beijing, the simulated ground vibration levels agreed largely with the observational data. The comparison of numerical results for the two kinds of saturated soil shows that the vibrations of soft clay were higher than those of saturated sand, and the vibration intensities of ground caused by high speed train are larger than those by the low-speed train. The Mach cone appeared in the simulated wave field of the ground surface in the case that train speed approached the phase velocity of Rayleigh waves. The numerical results also show that the Mach cone can still be generated even the train speed is slightly lower than the Rayleigh wave velocity. The proposed Green's function is able to represent such mechanisms as fluid-solid interaction between two phases of saturated soil, geometric and physical stratification of soil deposit and three-dimensional propagation of viscoelastic waves in a ground. Some train-induced vibration features of the water-saturated layered ground can be simulated by the train-track-ground vibration model based on the Green's function, which will be helpful to understand the propagation and attenuation of the ground-borne vibrations caused by moving trains.

Prediction and mitigation analysis of railway-induced vibrations of a layered transversely isotropic ground comprising different media with a hybrid 2.5-D method

Critical Velocity of High-speed Train Running on Soft Soil and Induced Dynamic Soil Response

Simulation and Mitigation Analysis of Ground Vibrations Induced by High-Speed Train with Three Dimensional FEM

Prediction and Mitigation Analyses of Ground Vibrations Induced by High Speed Train with 3-Dimensional Finite Element Method and Substructure Method

Green’s Function of Multi-Layered Poroelastic Half-Space for Models of Ground Vibration Due to Railway Traffic

Dynamic Response of a Track Coupled with a Transversely Isotropic Ground Due to Train Axle Loads

Prediction and mitigation analysis of ground vibration caused by running high-speed trains on rigid-frame viaducts

The Wave Function Method for Calculation of Vibrations from a Twin Tunnel in a Multi-Layered Half-Space

Investigating the Influence of Non-Uniform Characteristics of Layered Foundation on Ground Vibration Using an Efficient 2.5D Random Finite Element Method

Practical Back-Analysis Methodology to Predict Underground Train-Induced Building Vibrations

Dynamic Green's function of stratified ground with saturated soil layers for modeling ground vibration near railway track

A 2.5D Finite Element Approach for Predicting Ground Vibrations Generated by Vertical Track Irregularities

Technical Note: Three-dimensional analyses of dynamic responses of track-ground system subjected to a moving train load

2.5D prediction of soil vibrations due to railway loads by the isogeometric analysis with scaled boundary

Predicting ground vibrations from railway tunnels using an improved 2.5D FEM-PML model with soil spatial variability

Efficient time–frequency approach for prediction of subway train-induced tunnel and ground vibrations

A semi-analytical method for predicting train-induced vibrations considering train-track-soil and soil-pile-building dynamic interactions

GROUND VIBRATION GENERATED BY TRAIN MOVING LOADINGS USING 2.5D FINITE ELEMENT METHOD

Prediction of Ground Vibration Generated by Vertical Track Irregularity Using 2. 5D FEM

Prediction and mitigation of train-induced vibrations of large-scale building constructed on subway tunnel

Prediction of Ground Vibration under Combined Seismic and High-Speed Train Loads Considering Earthquake Intensity and Site Category