Abstract:Lithium- and manganese-rich transition-metal oxide (LMR-NMC) electrodes have been designed either as heterostructures of the primary components ("composite") or as core-shell structures with improved electrochemistry reported for both configurations when compared with their primary components. A detailed electrochemical and structural investigation of the 0.5Li2MnO3-0.5LiNi0.5Mn0.3Co0.2O2 composite and core-shell structured positive electrode materials is reported. The core-shell material shows better overall electrochemical performance compared to its corresponding composite material. While both configurations gave the same initial charge capacity of ∼300 mAh/g when cycled at a rate of 10 mA/g at 25 °C, the core-shell sample gives a discharge capacity of 232 mAh/g compared to 208 mAh/g delivered by the composite sample. Also, the core-shell sample gave better rate capability and a smaller first-cycle irreversible capacity loss than the composite sample. The improved performance of the core-shell material is attributed to its lower surface reactivity and limited structural change since the more stable Li2MnO3 shell screens the more reactive Ni-rich core material from interacting with either air or electrolyte at high potentials, thereby preventing electrode surface modification. In situ X-ray diffraction correlated with electrochemical data revealed that the composite sample shows stronger volumetric changes in the lattice parameters during charging to 4.8 V. In addition, X-ray absorption spectroscopy showed an incomplete Ni reduction process after the first discharge for the composite sample. From these results, it was shown that this leads to a more severe degradation in the composite material that affects Li+ intercalation in the subsequent discharge, thereby resulting in its poorer performance. Furthermore, to confirm these results, another LMR-NMC material with a different composition (having a Ni-poor core)-0.5Li2MnO3-0.5LiNi0.33Mn0.33Co0.33O2-was investigated. The core-shell structured positive electrode material also gave an improved electrochemical performance compared to the corresponding composite positive electrode material. These results show that the core-shell configuration could effectively be used to improve the performance of the LMR-NMC materials to enable future high-energy applications.

Towards understanding the functional mechanism and synergistic effects of LiMn2O4 - LiNi0.5Mn0.3Co0.2O2 blended positive electrodes for Lithium-ion batteries

Elucidation of Synergistic Effect of Mg-co-doping on Electrochemical Performance of Mn-doped LiNiO2

Probing Depth-Dependent Transition-Metal Redox of Lithium Nickel, Manganese, and Cobalt Oxides in Li-Ion Batteries

In Situ X-ray Diffraction and X-ray Absorption Spectroscopic Studies of a Lithium-Rich Layered Positive Electrode Material: Comparison of Composite and Core-Shell Structures

Enhanced Cycling Performance of Ni-Rich Positive Electrodes (NMC) in Li-Ion Batteries by Reducing Electrolyte Free-Solvent Activity

Overlithiation-driven structural regulation of lithium nickel manganese oxide for high-performance battery cathode

Insight into the Synergistic Effect Mechanism Between the Li2MO3 Phase and the LiMO2 Phase (M = Ni, Co, and Mn) in Li- and Mn-rich Layered Oxide Cathode Materials

Mitigation of Layered to Spinel Conversion of a Li-Rich Layered Metal Oxide Cathode Material for Li-Ion Batteries

Studies of Lini0.5mn1.5o4 As A Positive Electrode for Li-Ion Batteries: M3+ Doping (M = Al, Fe, Co and Cr), Electrolyte Salts and Lini0.5mn1.5o4/Li4ti5o12 Cells

Improving the interfacial stability of Li1.2Mn0.54Ni0.13Co0.13O2 cathode and Li metal anode via dual electrolyte additives synergistic effect

Exploring Lithium-Cobalt-Nickel Oxide Spinel Electrodes for ≥3.5 V Li-Ion Cells.

Mixed-conducting Interlayer Boosting the Electrochemical Performance of Ni-rich Layered Oxide Cathode Materials for Lithium Ion Batteries

Decoupling the Roles of Ni and Co in Anionic Redox Activity of Li-rich NMC Cathodes.

Synergistic Effects of Ni 2+ and Mn 3+ on the Electrochemical Activation of Li 2 MnO 3 in Co-Free and Ni-Poor Li-Rich Layered Cathodes

Fatigue in 0.5Li(2)mno(3):0.5Li(ni1/3co1/3mn1/3)o-2 Positive Electrodes for Lithium Ion Batteries

Optimized NMC622 electrodes with a high content of the active material: A comprehensive study

Impact of synergistic interfacial modification on the electrochemical performance of LiNi0.5Mn1.5O4 cathode materials

Pre-Lithiation of Li(Ni1-X-Ymnxcoy)O-2 Materials Enabling Enhancement of Performance for Li-Ion Battery

Morphological effect on high compaction density nickel-rich layered oxide cathodes during electrochemical lithiation and delithiation

Enhancing the Mn Redox Kinetics of LiMn0.5Fe0.5PO4 Cathodes Through a Synergistic Co-Doping with Niobium and Magnesium for Lithium-Ion Batteries

Ternary Cathode Blend Electrodes for Environmentally Friendly Lithium‐Ion Batteries