Abstract:Double junction tandem solar cells consisting of two absorbers with designed different band gaps show great advantage in breaking the Shockley-Queisser limit efficiency of single junction solar cell by differential absorption of sunlight in a wider range of wavelengths and reducing the thermal loss of photons. Benefiting from the advantages of adjustable band gap and low cost of perovskite cells perovskite/crystalline silicon tandem solar cells have become a research hotspot in photovoltaics. We systematically reviewed the latest research progress of perovskite/crystalline silicon tandem solar cells. Focused on the structure of perovskite top cells intermediate interconnection layers and crystalline silicon bottom cells We summarized the design principles of high-efficiency tandem devices in optical and electrical aspects. We found that the optical and electrical engineering of each layer structure in perovskite/crystalline silicon tandem solar cells goes through the whole process of device preparation. We also summarized the challenges limiting the further improvement of the efficiency of the perovskite/crystalline silicon tandem solar cells and the conrrespoding measures including improving the balance between Voc and Jsc of the broadband perovskite cell through additive engineering and interface engineering improving the bandgap matching between the electrical layers and reducing the carrier transport barrier through adjusting the work function or conductivity of layers improve the optical coupling between sub cells and the photocurrent of tandem solar cells by light engineering and conformal deposition technology of perovskite cells. At present many technologes to improve the stability of perovskite solar cells including additive engineering and interface engineering but the problem has not been fundamentally solved. Improving the stability of broadband gap perovskite solar cells to that of crystalline silicon solar cells will become an important challenge to limit its large-scale application. In terms of efficiency the mass production efficiency of perovskite/crystalline silicon tandem solar cells is far lower than the laboratory level. One of the reasons is that it is difficult to achieve low-cost and uniform large area perovskite solar cells deposition. Therefore improving the stability of broadband gap perovskite solar cells and developing low-cost large-area perovskite deposition technology will become extremely critical. Finally we look forward to the next generation of higher efficient low-cost tandem solar cells. We believe that with the increasing demond for higher efficiency photovoltaic devices the triple junction solar cells based on the perovskite/crystalline silicon stack structure will become the future of photovoltaics.

Approaches for III‐V/Si tandem solar cells and comparative studies on Si tandem solar cells

Designing III-V Multijunction Solar Cells on Silicon

Raising the one-sun conversion efficiency of III–V/Si solar cells to 32.8% for two junctions and 35.9% for three junctions

III–V Multijunction Solar Cell Integration with Silicon: Present Status, Challenges and Future Outlook

Research progress of perovskite/crystalline silicon tandem solar cells technical towards efficiency above 30%

Three‐terminal perovskite/integrated back contact silicon tandem solar cells under low light intensity conditions

A Comprehensive Review of Tandem Solar Cells Integrated on Silicon Substrate: III/V vs Perovskite

Methods for Integration of III-V Compound and Silicon Multijunction for High Efficiency Solar Cell Design

Recent Progress in Developing Monolithic Perovskite/Si Tandem Solar Cells

Passivating contacts for high-efficiency silicon-based solar cells: From single-junction to tandem architecture

Monolithic Perovskite–Perovskite–Silicon Triple-Junction Tandem Solar Cell with an Efficiency of over 20%

Highly Efficient Monolithic Perovskite/Perovskite/Silicon Triple-Junction Solar Cells

Wafer‐bonded two‐terminal III‐V//Si triple‐junction solar cell with power conversion efficiency of 36.1% at AM1.5g

Recent Advances and Opportunities in Perovskite-based Triple-junction Tandem Solar Cells

Optimum Design And Preparation Of A-Si/A-Si/A-Sige Triple-Junction Solar-Cells

Bifacial Si Heterojunction-Perovskite Organic-Inorganic Tandem to Produce Highly Efficient Solar Cell

Interface engineering for high-performance, triple-halide perovskite–silicon tandem solar cells

Monolithic Two-Terminal Perovskite/Perovskite/Silicon Triple-Junction Solar Cells with Open Circuit Voltage >2.8 V

Molecular Synergistic Effect for High Efficiency Monolithic Perovskite/Perovskite/Silicon Triple‐Junction Tandem Solar Cells

Optimum design and preparation of<i>a</i>‐Si/<i>a</i>‐Si/<i>a</i>‐SiGe triple‐junction solar cells

Review on perovskite silicon tandem solar cells: Status and prospects 2T, 3T and 4T for real world conditions