Abstract:This Letter proposes an approach to develop a spoof surface plasmon polariton (SSPP) transmission line (TL) by loading short-circuited (SC) shunt stubs. Lower out-of-band rejections can be flexibly controlled without affecting the upper cutoff frequency by independently modifying the stubs. Dispersion analysis of the SSPP unit is realized by theoretical calculation and circuit simulation to predict the upper cutoff frequency of the proposed SSPP TL simultaneously. Also, parametric sweeping of the SC shunt stubs is performed based on circuit simulation to investigate their impacts on the lower and upper out-of-band rejections of the proposed SSPP TL. In addition, electric field distributions of different types of TLs are simulated and compared to study the transmission characteristics of the proposed SSPP TL. The lower cutoff frequency can be flexibly tuned in a wide range, from 1.2 to 2.1 GHz, in the simulations. The measured 3-dB fractional bandwidth is about 128.1%, covering a range from 1.19 to 5.43 GHz. The numerical and experimental results are compatible, which verifies the feasibility of the proposed approach. This approach can offer more convenience and flexibility for controlling the rejections of the SSPP by introducing up to four tuning parameters. More importantly, the proposed SSPP TL avoids using the substrate integrated waveguide (SIW) technique, which shows the potential to decrease the transverse width ( 0.44 λ g ), especially at lower frequencies (e.g., 1.2 GHz), and to reduce the complexity in designing the high-efficiency transition. This work paves the way for the development of novel SSPP-based microwave devices.

Surface Plasmon Transmission Line Based on Folded Stepped Grooves and Spiral-Shaped Structures

Compact CPW Spoof Surface Plasmon Polariton Transmission Line with Interdigital Structure

Spoof Surface Plasmon Polariton Based on Stepped Grooves and Its Application in Compact Low-Pass Filter Design

A Compacted 2.5-Dimensional Spoof Surface Plasmon Polaritons Transmission Line

An Ultra-Compact Surface Plasmon Transmission Line Based on Partially Grounded Coplanar Waveguide

A Miniaturized Folded Spoof Surface Plasmon Polaritons Transmission Line

Compact Folded SSPP Transmission Line and Its Applications in Low-Pass Filters

Mush-Room Structures–Loaded Coplanar Waveguide Spoof Surface Plasmon Polariton with Reduced Longitudinal Length

Broadband Nonreciprocal Spoof Plasmonic Phase Shifter Based on Transverse Faraday Effects

Compact Spoof Surface Plasmon Polariton Waveguides with Simple Configurations and Good Performance

Spoof Surface Plasmonic Waveguide Devices with Compact Length and Low-Loss

Short-circuited Stub-Loaded Spoof Surface Plasmon Polariton Transmission Lines with Flexibly Controllable Lower Out-of-band Rejections

PSO-Algorithm-Assisted Design of Compact SSPP Transmission Line

Spoof Surface Plasmon Polaritons Developed from Coplanar Waveguides in Microwave Frequencies

Compact transition enabled broadband propagation of spoof surface plasmon polaritons based on the equivalent circuit model

A Novel Three-Dimensional Integrated Spoof Surface Plasmon Polaritons Transmission Line.

A compact effective surface plasmon polariton transmission line with undiminished bandwidth and enhanced field confinement

Capacitor-Loaded Coplanar Waveguide Spoof Surface Plasmon Polariton with Reduced Transversal Width

3D-Printed Spoof Surface Plasmon Polaritons Transmission Line for Compact System Interconnection in Ka-Band

Compact Spoof Surface Plasmon Polaritons Waveguide Drilled with L-shaped Grooves