Abstract:Poly(lactic-co-glycolic acid) (PLGA) is a widely used polymeric biomaterial due to its excellent biocompatibility and biodegradation. Asymmetric PLGA hollow fiber membranes (HFMs) have been extensively used as porous tubular scaffolds for tissue engineering, e.g. for nerve conduits and artificial blood vessels. PLGA HFMs are generally fabricated through a dry-jet wet spinning process, and the porous morphology of PLGA HFMs induced by polymer/solvent/nonsolvent ternary phase inversion plays a key role in their biomedical performance. In this study, PLGA was dissolved in dimethyl sulfoxide (DMSO) as the dope fluid, and deionized water with different DMSO contents was used as the bore fluid. The influence of bore fluid composition on the HFM morphology and performance was investigated by measuring phase separation time, porosity, mechanical properties, and in vitro hydrolytic degradation. The results indicated that with increased bore fluid DMSO content, the inner and outer diameters, as well as the wall thickness of the HFMs, decreased significantly; also, the inner surface became more porous and the inner surface pore size and porosity increased. Cross-sectional SEM images showed that the middle layer of the five-layered microstructure gradually changed from large voids to finger-like microvoids when the DMSO content in bore fluid increased from 0% to 60%. Furthermore, the HFMs resulting from higher DMSO content in bore fluid had a lower porosity, a faster degradation rate, a higher Young's modulus, and a lower suture retention strength. More importantly, the in vitro cell culture on the inner surface of PLGA HFMs showed that PC12 cells cultured on HFMs prepared with 60% DMSO bore fluid exhibited better cell adhesion, longer neurite length, and alignment along the HFM longitudinal axis. A ternary phase diagram and the Flory-Huggins theory were applied to analyze HFM morphological formation. The study contributes to understanding of the mechanism of HFM porous morphology formation and should guide potential application of PLGA HFMs as tissue engineering scaffolds.

Effect of Gelatin Content on Degradation Behavior of PLLA/Gelatin Hybrid Membranes

Electrospun Poly(L-Lactic Acid)/Gelatin Hybrid Polymer as a Barrier to Periodontal Tissue Regeneration

Gelatin Enhances the Wet Mechanical Properties of Poly(D,L-Lactic Acid) Membranes

Effect Of Fiber Structure On The Properties Of The Electrospun Hybrid Membranes Composed Of Poly(E-Caprolactone) And Gelatin

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Effect of Bore Fluid Composition on Poly(lactic-Co-glycolic Acid) Hollow Fiber Membranes Fabricated by Dry-Jet Wet Spinning

In Vitro and in Vivo Degradability and Cytocompatibility of Poly(l-Lactic Acid) Scaffold Fabricated by a Gelatin Particle Leaching Method

Structure, Properties, and in Vitro Degradation Behavior of Biodegradable Poly(l‐lactic Acid)‐trimethylene Carbonate‐glycolide Terpolymer

In vitro and in vivo degradability and cytocompatibility of poly(l-lactic acid) scaffold fabricated by a gelatin particle leaching method.

Enzyme-catalyzed Degradation Behavior of L-Lactide/trimethylene Carbonate/glycolide Terpolymers and Their Composites with Poly(l-Lactide-co-glycolide) Fibers

Degradation Behaviors of Polylactic Acid, Polyglycolic Acid, and Their Copolymer Films in Simulated Marine Environments

Tuning structural relaxations, mechanical properties, and degradation timescale of PLLA during hydrolytic degradation by blending with PLCL-PEG

Preparation and Performance Study of Poly(1,3-Propanediol) Ester/PLLA Blended Membrane

In Vitro Degradation Behavior of L-Lactide/Trimethylene Carbonate/Glycolide Terpolymers and A Composite with Poly(L-Lactide-Co-Glycolide) Fibers

Effects of L-lactide and D,L-lactide in poly(lactide-co-glycolide)-poly(ethylene glycol)-poly(lactide-co-glycolide) on the bulk states of triblock copolymers, and their thermogellation and biodegradation in water

Effect of Ethylene/butyl methacrylate/Glycidyl Methacrylate Terpolymer on toughness and biodegradation of poly (l-lactic acid)

Biodegradable membrane of poly(l-lactide acid-dioxanone-glycolide) and stereocomplex poly(lactide) with enhanced crystallization and biocompatibility

Microstructure and Mechanical Properties of Poly(l‐lactide) Scaffolds Fabricated by Gelatin Particle Leaching Method

A Potential Alternative to Non-Degradable Plastics

Effect Of Segment Structures On The Hydrolytic Degradation Behaviors Of Totally Degradable Poly(L-Lactic Acid)-Based Copolymers

Accelerated hydrolytic degradation of poly(l-lactide) by blending with poly(ether-block-amide)