Effects of temperature, atmosphere, silicon occurrences on fine particle formation from vaporization during high-silicon coal combustion

Bengen Gong,Chong Tian,Zhuo Xiong,Yan Yang,Jun Wu,Wenju Li,Yi Du,Huan Liu,Yi Wang,Yongchun Zhao,Junying Zhang
DOI: https://doi.org/10.1016/j.fuel.2020.118649
IF: 7.4
2020-11-01
Fuel
Abstract:<p>Pure silica, typical high-silicon coals (Xuanwei area, China) and their low temperature ashes (LTA) were selected to carry out a vaporization experiment in different atmospheres to reveal the release mechanism of silicon. Further, high-silicon coal combustion experiments were conducted using a drop tube furnace (DTF) to investigate the formation behaviors of fine particulate matter (PM) and the distribution of silicon in the different-sized particles. Field emission scanning electron microscopy (FESEM) equipped with energy dispersive X-ray spectroscopy (EDX) and X-ray fluorescence spectrometry (XRF) were used to study the morphology and chemical compositions, respectively. The results show that the high temperature would promote Si-bearing compounds vaporization and fine particle emission. The SiO<sub>2</sub> vaporization rate in the reducing atmosphere (steam and CO<sub>2</sub>) is much higher than that in the oxidizing atmosphere (air and CO<sub>2</sub>/O<sub>2</sub>). Higher O<sub>2</sub> concentrations in CO<sub>2</sub>/O<sub>2</sub> atmospheres will handicap Si-bearing compounds vaporization; the SiO<sub>2</sub> vaporization rate of Yantang coal decreased from 4.7% to 3.9% as the O<sub>2</sub> concentration increased from 10% to 30% at 1400 °C. A maximum value of the PM<sub>1.0</sub> concentration can be observed at 0.1 μm, and there is a peak content of SiO<sub>2</sub> in PM<sub>10</sub>, which is in the range of 60–80% for different temperatures. The mechanism of PM<sub>0.1</sub> formation is related to the vaporization-coagulation of the refractory SiO<sub>2</sub> and secondary Si-bearing compounds, and the more Si that vaporizes at high temperatures, the more PM<sub>0.1</sub> that is generated during coal combustion.</p>
energy & fuels,engineering, chemical
What problem does this paper attempt to address?