Prussian Blue Analogues with Na2NixCoyMnzFe(CN)6-Multimetallic Structures as Positive and Hydrogen Vanadate as Negative Electrodes in Aqueous Na-Ion Batteries for Solar Energy Storage Applications

Pappu Naskar,Biplab Biswas,Sourav Laha,Anjan Banerjee
DOI: https://doi.org/10.1039/d4ya00178h
2024-05-04
Energy Advances
Abstract:Low cost and environmentally benign aqueous Na-ion batteries are the legitimate choice for large scale solar energy storage applications. The Na-ion batteries with Prussian blue analogues (PBAs) positive and hydrogen vanadate (H2V3O8/HVO) negative electrodes in hydrogel electrolytes provide excellent durability, good power capability and moderate energy density. Herein, three variants of PBAs are synthesized with tuning the compositions of Nitrogen-coordinates transition metals, i.e., Ni, Co and Mn, while the resulting PBAs are following: (i) Na2Ni0.33Co0.33Mn0.33Fe(CN)6 (PBA-1), (ii) Na2Ni0.5Co0.2Mn0.3Fe(CN)6 (PBA-2) and (iii) Na2Ni0.2Co0.5Mn0.3Fe(CN)6 (PBA-3). The trend of capacity in PBAs is the function of Ni-content, as Ni2+ is electrochemically inert. The PBA-1, PBA-2 and PBA-3 exhibit specific capacities of 100, 75 and 120 mAh g-1, respectively at 100 mA g-1. The electrochemical impedance spectroscopic analysis illustrates solid state electronic conductivity, while PBA-1 depicts highest electronic conductivity as 23×10-4 S cm-1 with respect to PBA-2 (15×10-4 S cm-1) and PBA-3 (7.4×10-4 S cm-1). Even though, Ni does not contribute in the capacity, but it improves the cycle life of the active material. PBA-3 demonstrates 86% capacity retention upon 500 cycles at 300 mA g-1, while PBA-1 and PBA-2 show respective 91 and 92% retention. The lower Ni-content in PBA-3 is accountable for comparative poor cycling performance. However, based on the optimum performances of PBAs, a 1.2V rated PBA-1//HVO full cell is assembled, which delivers a specific capacity of 65 mAh g-1 (@ 100 mA g-1), an energy density of 78 Wh kg-1 (@ 121 W kg-1), a power density of 520 W kg-1 (@ 31 Wh kg-1) and a good cycle life (81% capacity retention upon 500 cycles @ 300 mA g-1). A 5 V/4 mAh prototype device is also developed for practical demonstration of solar energy storage applications. Based on the energy storage performances, cost, safety and environmental issues, this Na-ion battery could be scaled up for large scale production.
What problem does this paper attempt to address?